Sign In
Forgot Password?
Sign In | | Create Account

Mentor Blogs

Posts tagged with 'AXI'

2 Apr, 2013

Mark Laing Hi there One of the areas that we constantly look to enhance with each release is our support for the machines that are in use with our customers. Although we use the Mentor Ideas site as a opportunity to derive feedback from yourselves, I also wanted to take this chance to ask you to let me know which machines you still need us to support either because they are new to the market or needed to address … Read More

AOI, Enhancement, Flying Probe, ICT, AXI, data preparation, bill of materials, Design For Test, Automated Optical Inspection, Automated X-Ray Inspection, documentation, boundary scan, BOM, process, vPlan, SPI, THT, Solder Paste Inspection, programming

5 Mar, 2013

Mark Laing Hi there We recently had a successful trade show at Apex 2013 in San Diego. During the event I was interviewed with iConnect PCB007′s Andy Shaughnessy. We discussed the main themes that we were promoting on the booth in the area of Process Preparation, namely being able to use a single solution for all areas of PCB manufacturing data preparation as well as simplying the many types of part library … Read More

IPC, vPlan, AOI, documentation, Flying Probe, ICT, AVL, data preparation, AXI, Design For Test, Automated Optical Inspection, Automated X-Ray Inspection, BOM, bill of materials, testability, SPI, Solder Paste Inspection, programming, process

26 Feb, 2013

Mark Laing Hi there I recently discussed the new capability in Valor MSS Process Preparation 11.3. I mentioned that I would go in to more detail on some of the areas that are part of this version and I will cover the new Test Probe Placement capability today. We have added an all new Test Probe Placement Session in 11.3 that performs the physical test probe placement analysis natively within the application. This … Read More

AOI, Flying Probe, ICT, AXI, data preparation, bill of materials, Design For Test, Automated Optical Inspection, Automated X-Ray Inspection, boundary scan, BOM, process, vPlan, testability, VPL

21 Feb, 2013

Mark Laing Hi there The Valor team are here in San Diego at the IPC Apex Trade Show. We’ve had a great couple of days, meeting our customers, plenty of new ones as well as meeting with some of the other vendors at the show. Our theater presentations have been well received, bringing people in to the booth and then stopping afterwards, asking questions and looking for more information. If you are at the show … Read More

Enhancement, documentation, programming, Solder Paste Inspection, AOI, Design For Test, SPI, apex, stencil, testability, Automated Optical Inspection, VPL, BOM, Automated X-Ray Inspection, vPlan, boundary scan, approved vendor list, data preparation, AXI, AVL, bill of materials, Flying Probe, Planning, mixed vendor, OIB, IPC, ICT

12 Feb, 2013

Mark Laing Hi there Last week I discussed the new capability in Valor MSS Process Preparation 11.3. I mentioned that I would go in to more detail on some of the areas that are part of this version and I will start with our new capability for inspection machines. There are three main types of automated inspection machines, Automated Optical Inspection (AOI), Automated X-Ray Inspection (AXI) and Solder Paste Inspection … Read More

data preparation, AOI, aperture, Solder Paste Inspection, SPI, stencil, Automated X-Ray Inspection, AXI, process, Automated Optical Inspection

Valor MSS PCB Manufacturing Systems Solutions

Electrical & Wire Harness Design

Functional Verification

IC Manufacturing

IC Design

Mechanical Analysis

Silicon Test and Yield Analysis

System Modeling

Vehicle System Design

3D-IC Design and Test Solutions

Aerospace and Military Solutions

Accelerating ARM-based Design

Automotive Solutions

Foundry Solutions

Recent Comments