Sign In
Forgot Password?
Sign In | | Create Account

Mentor Blogs

Posts tagged with 'data preparation'

11 Jun, 2013

Mark Laing Hi there Boundary Scan has been available for well over 15 years now and it has continued to evolve over that time as the initial IEEE standard 1149 has been updated to cover more than just digital devices. Although for most printed circuit designs full testing through 4 or 5 connections is not possible a significant number of designs have some number of components on them that support the Boundary … Read More

ICT, Flying Probe, testability, vPlan, boundary scan, process, Design For Test, programming, data preparation

31 May, 2013

Mark Laing Hi there A couple of versions ago Valor MSS released a new interface to the Juki IS software. Here we created the best solution for Juki machines through the new ISS XML file that Juki developed. The reason that this solution is the best on the market is because we can use our unique auto-generation capability to create Juki specific part data from existing MSS vShapes, VPL content or by reading all … Read More

Enhancement, data preparation, Juki, approved vendor list, programming, vPlan, BOM, process, AVL, bill of materials

14 May, 2013

Mark Laing Hi there SMT vendors are commonly asked by prospective customers about their existing pick and place programs and what happens with them if they purchase another type of equipment. The customer is usually told that there is nothing that can be done with those programs and hence they need to maintain those in the old system until they migrate them to the new machines. However in Valor MSS Process Preparation … Read More

Sony, Assembleon, programming, Sequence, Siemens, approved vendor list, mixed vendor, Fuji, Panasonic, Hitachi, process, data preparation, Juki, iPulse, Universal, vPlan, Yamaha

8 May, 2013

Mark Laing Hi there This week I would like to ask for input on assembly variants. For the context of this post I would like to state that an assembly variant is one where the base bare PCB is common to all assembly variants and that the variation is through the presence and absence of parts including part substitution of functionally different parts. Therefore using an Approved Vendor List (AVL) to substitute … Read More

data preparation, approved vendor list, bill of materials, process, BOM, assembly variant, AVL, variant

24 Apr, 2013

Mark Laing Hi there This may seem a strange topic for a Process Engineering Blog but bear with me on this. Over the past few years, car manufacturers seem to be in a race to develop the cars with the highest number of gear ratios in them. Currently cars on the market have automatic gearboxes with 8 forward ratios. Manual gearboxes exist with 7 forward gears now.  I have also heard about possible future gearboxes … Read More

programming, AOI, data preparation, vPlan, bill of materials, BOM

2 Apr, 2013

Mark Laing Hi there One of the areas that we constantly look to enhance with each release is our support for the machines that are in use with our customers. Although we use the Mentor Ideas site as a opportunity to derive feedback from yourselves, I also wanted to take this chance to ask you to let me know which machines you still need us to support either because they are new to the market or needed to address … Read More

AOI, Enhancement, Flying Probe, ICT, AXI, data preparation, bill of materials, Design For Test, Automated Optical Inspection, Automated X-Ray Inspection, documentation, boundary scan, BOM, process, vPlan, SPI, THT, Solder Paste Inspection, programming

26 Mar, 2013

Mark Laing Hi there As the next installment of the new capability in Valor MSS 11.3, I shall today talk about the improvements we have made in the Stencil Design module of the product. We added a number of new standard apertures to the Stencil Design with this release. These were specifically to address commonly created stencil openings that were previously challenging to create quickly. Now they are automatically … Read More

solder paste, stencil, aperture, vPlan, data preparation, BOM

5 Mar, 2013

Mark Laing Hi there We recently had a successful trade show at Apex 2013 in San Diego. During the event I was interviewed with iConnect PCB007′s Andy Shaughnessy. We discussed the main themes that we were promoting on the booth in the area of Process Preparation, namely being able to use a single solution for all areas of PCB manufacturing data preparation as well as simplying the many types of part library … Read More

IPC, vPlan, AOI, documentation, Flying Probe, ICT, AVL, data preparation, AXI, Design For Test, Automated Optical Inspection, Automated X-Ray Inspection, BOM, bill of materials, testability, SPI, Solder Paste Inspection, programming, process

26 Feb, 2013

Mark Laing Hi there I recently discussed the new capability in Valor MSS Process Preparation 11.3. I mentioned that I would go in to more detail on some of the areas that are part of this version and I will cover the new Test Probe Placement capability today. We have added an all new Test Probe Placement Session in 11.3 that performs the physical test probe placement analysis natively within the application. This … Read More

AOI, Flying Probe, ICT, AXI, data preparation, bill of materials, Design For Test, Automated Optical Inspection, Automated X-Ray Inspection, boundary scan, BOM, process, vPlan, testability, VPL

21 Feb, 2013

Mark Laing Hi there The Valor team are here in San Diego at the IPC Apex Trade Show. We’ve had a great couple of days, meeting our customers, plenty of new ones as well as meeting with some of the other vendors at the show. Our theater presentations have been well received, bringing people in to the booth and then stopping afterwards, asking questions and looking for more information. If you are at the show … Read More

Enhancement, documentation, programming, Solder Paste Inspection, AOI, Design For Test, SPI, apex, stencil, testability, Automated Optical Inspection, VPL, BOM, Automated X-Ray Inspection, vPlan, boundary scan, approved vendor list, data preparation, AXI, AVL, bill of materials, Flying Probe, Planning, mixed vendor, OIB, IPC, ICT

12 Feb, 2013

Mark Laing Hi there Last week I discussed the new capability in Valor MSS Process Preparation 11.3. I mentioned that I would go in to more detail on some of the areas that are part of this version and I will start with our new capability for inspection machines. There are three main types of automated inspection machines, Automated Optical Inspection (AOI), Automated X-Ray Inspection (AXI) and Solder Paste Inspection … Read More

data preparation, AOI, aperture, Solder Paste Inspection, SPI, stencil, Automated X-Ray Inspection, AXI, process, Automated Optical Inspection

4 Feb, 2013

Mark Laing Hi there We have just released a new version of Valor MSS (11.3) that brings a number of significant enhancements to existing customers as well as those looking to invest in cutting edge process preparation solutions. I’ll be covering some of these enhancements in more detail in future blogs but here is a short summary of some of the new capability that we have in 11.3. We have made significant … Read More

OIB, mixed vendor, vPlan, AOI, Flying Probe, ICT, BOM, AVL, documentation, bill of materials, Enhancement, Design For Test, data preparation, VPL, testability, stencil, programming, Planning, process

29 Jan, 2013

Mark Laing Hi there Next month on February 19th, 20th and 21st is the annual IPC Apex Convention in San Diego and there will be more than 400 exhibitors from 50 different countries represented at the show. Here are five reasons you should attend: 1. The Valor Division of Mentor Graphics will be exhibiting at booth 1227. So, you will be able to meet the U.S. sales team as well as some of the Product Line personnel … Read More

mixed vendor, AOI, Flying Probe, apex, ICT, IPC, bill of materials, BOM, approved vendor list, documentation, data preparation, Design For Test, vPlan, stencil, Sequence, programming, san diego, process

22 Jan, 2013

Mark Laing Hi there A few months back I talked about in-line AOI but this time I’ll mention a similar capability we have in the Valor MSS Process Preparation suite of in-line Solder Paste Inspection or SPI. The idea with in-line AOI and SPI is for the outputs to the different inspection machines to understand where components are being placed in the line and to create output that matches the placement. In … Read More

vPlan, bill of materials, AOI, programming, data preparation, BOM, SPI, stencil

17 Jan, 2013

Mark Laing Hi there This week yields a new medium for the Valor MSS Process Preparation suite in that you can now hear from me through the YouTube video below. Here I talk about the advantages of our suite for those users who are still using multiple products for process engineering or are having to maintain multiple part libraries across the various types of equipment on your production line. I’ve had discussions … Read More

Library, mixed vendor, AVL, test expert, vPlan, bill of materials, part library, data preparation, fabmaster, programming, BOM

Valor MSS PCB Manufacturing Systems Solutions

Electrical & Wire Harness Design

Functional Verification

IC Manufacturing

IC Design

Mechanical Analysis

Silicon Test and Yield Analysis

System Modeling

Vehicle System Design

3D-IC Design and Test Solutions

Aerospace and Military Solutions

Accelerating ARM-based Design

Automotive Solutions

Foundry Solutions

Recent Comments