Sign In
Forgot Password?
Sign In | | Create Account

Mentor Blogs

Posts tagged with 'Design Automation'

27 Jan, 2012

J VanDomelen Gone, in large part, are the days of military and aerospace (mil/aero) organizations buying a complete, comprehensive, end-to-end turnkey system from a single, solitary vendor. Rather, a vast majority of today’s mil/aero systems combine the technologies, components, and capabilities of myriad technology vendors. Integrating parts from various vendors in a single system, like most things, has its pros … Read More

Embedded Systems, Electronic, Geek, Sony, Software, Yamaha, Mentor.com, Computer, Mil-Aero, Milaero, Aerospace, Military, Electric, Hardware, electrical, HDMI, Design Automation, Mentor, Mentor Graphics

30 Dec, 2011

J VanDomelen Just this month, PKC Eesti AS, a supplier of electrical wiring harnesses to European truck makers and a subsidiary of Finland’s PKC Group Oyj, announced that it is deploying the latest technology from the Mentor Graphics Capital suite of tools at its factory in Estonia. Among the tools adopted is the Capital HarnessXC product, which is designed to enable harness engineers to create detailed, validated, … Read More

Electronic, electrical, Embedded Systems, PKC Group, Military, Computer, Mentor Graphics, Mentor.com, COTS, Mil-Aero, Capital HarnessXC, Milaero, Engineer, Geek, Electric, Hardware, Mentor, Design Automation

29 Dec, 2011

J VanDomelen Future Combat Systems (FCS) is but a distant memory, but the need to stay on the bleeding edge of technology in military and aerospace (mil/aero) environments remains unchanged. Today’s missions in harsh and challenging environments call for the latest and greatest technological advances. FCS, the program created to deliver manned and unmanned advanced network-centric warfare and new combat vehicles … Read More

Mentor.com, Mentor Graphics, FCS, BCT, Geek, Hardware, Mentor, Aerospace, electrical, Design Automation, Electronic, Embedded Systems, Brigade Combat Team Modernization Program, Engineer, Computer, DoD, Electric, Mil-Aero, U.S. Army, Warfighters, Milaero, Military

26 Dec, 2011

J VanDomelen The availability of sufficient power to drive myriad electronics in ground combat vehicles is a major concern in the military and aerospace (mil/aero) market. Current military ground vehicle platforms are outfitted with a wealth of electronics—including command and control, communications, radar and radar jamming, weaponry, counter-IED/countermeasures, and intelligence, surveillance, and reconnaissance … Read More

Electronic, electrical, Geek, Stryker, Military, battlefield, Mentor Graphics Capitol, Mentor.com, COTS, Mil-Aero, Aerospace, Milaero, Hardware, HMMWV, Electric, Mentor, Mentor Graphics, Design Automation

30 Nov, 2011

J VanDomelen

The good news: The aerospace market is alive, active, and growing in number and strength. The bad news: The mil/aero market seeks new, cutting-edge solutions (from individual components to comprehensive systems) that are not only well designed, but thoroughly tested and verified. (And if this geek had his say, they would be designed, tested, and verified using trusted, high-end, industry-proven software

Read More

Mentor, new, Aerospace, Electronic, Mentor.com, Mentor Graphics, bleeding edge, space, Hardware, Embedded Systems, Design Automation, Electric, Mil-Aero, electrical, cutting edge, Geek, Engineer, Milaero, Military

29 Nov, 2011

J VanDomelen “[Skydrol] is very unpleasant to work with. It stings. It forms a very fine mist and gets everywhere,” reveals an anonymous aircraft maintenance engineer of the widely used hydraulic fluid. “When you have a pinhole leak somewhere, and are trying to find it, you will get it all over you and itch for ages afterwards. It really should be banned as a health hazard to mechanics.” Sounds like lovely stuff, … Read More

Electronic, electrical, Embedded Systems, Milaero, Mil-Aero, Software, IESF, Integrated Electrical Solutions Forum, Capital, Mentor, Aerospace, Mentor.com, Engineer, Electric, Geek, Goodrich, Design Automation, Hardware

28 Nov, 2011

J VanDomelen Hydraulic systems have for decades been the go-to technology in airplanes, both commercial and military, because of their high power density and proven reliability. Yet, hydraulic systems can be difficult to control, given that sensors are often located far from the brake piston; can require more maintenance, given the propensity for leaks or contamination in the hydraulic lines and the fluid contained … Read More

Mil-Aero, Mentor.com, IESF, Computer, Integrated Electrical Solutions Forum, Mentor, Mentor Graphics, Aerospace, Engineer, Electric, Geek, Hardware, Hydraulic, Design Automation, Electronic, electrical, Embedded Systems, Milaero, Software, Solutia Inc., Military, Skydrol

21 Nov, 2011

J VanDomelen Goodrich Corp. engineers used electronic design automation (EDA) software to design, verify, and test the company’s latest innovative electronic brake automation avionics. The company’s electric brake system is being employed on the Boeing 787 Dreamliner airplane; in fact, a majority of 787 customers to date have selected the Goodrich electric brake system. Goodrich executives announced in March 2011 … Read More

Dreamliner, Electric, Mil-Aero, Mentor.com, Milaero, Goodrich, Aerospace, Hardware, Mentor, 787, Mentor Graphics, electrical, Design Automation, Electronic, Boeing, Engineer, Computer, Geek

20 Nov, 2011

J VanDomelen It’s the last thing I think about when I board a plane; yet, it’s first of mind when I see that we’re approaching pavement at a high rate of speed upon reaching our destination. You guessed it: I’m talking about brakes. This aircraft element gains little consumer attention (unless it fails to work, of course), but the critical system component is garnering considerable attention from the technology … Read More

Milaero, Mil-Aero, Aerospace, Mentor Graphics, Boeing, Mentor Graphics Capitol, Mentor.com, Mike Shaw, 787, Embedded Systems, Dreamliner, Geek, Goodrich, Mentor, Design Automation, electrical, Electric, Electronic, Software

26 Oct, 2011

J VanDomelen The unmanned aerial vehicle (UAV) market sector has experienced the most dynamic growth of any sector in the global aerospace industry this decade, according to a 2011 market study. Analysts at Teal Group, an aerospace and defense market analysis firm based in Fairfax, Va., predict UAV spending to nearly double over the next decade. Current worldwide UAV expenditures total $5.9 billion annually—a figure … Read More

Globalhawk, DoD, Mentor, UAV, U.S. forces, Al Qaeda, Military, NATO, battlefield, Philip Finnegan, Aerospace, Teal Group, Mentor Graphics, Mentor.com, Design Automation, Mil-Aero, Col. Muammar el-Qaddafi, Milaero, COTS

29 Sep, 2011

J VanDomelen We can all learn how to tell a great story, revealed Aaron Shin, senior director of the transition to products at Raytheon Company in Waltham, Mass., in his IESF keynote, “The Art of Storytelling.” Okay, admittedly, many of us geeks and nerds may not be the best speakers. But, so what? Don’t get me wrong, I strive toward and aspire to be a phenomenal, thought-provoking speaker and, as a result, an effective … Read More

Software, Raytheon, Aerospace, Mentor.com, Mil-Aero, Milaero, Military, Aaron Shin, IESF, Electric, Integrated Electrical Solutions Forum, electrical, Mentor, Design Automation, Mentor Graphics, Geek, Engineer, Hardware, Technology, The Art of Storytelling

26 Sep, 2011

J VanDomelen Developing a great story with which to “sell” our ideas is a facet of design work not all of us (we geek folk) are the best at pulling off; however, without a compelling and interesting story or pitch, many products and companies would not be where they are today. When it comes down to it, many successes can be attributed to a great storyteller. Aaron Shin, senior director of the transition … Read More

Software, Raytheon, Aerospace, Mentor.com, Mil-Aero, Milaero, Military, Aaron Shin, IESF, Electric, Integrated Electrical Solutions Forum, electrical, Mentor, Design Automation, Mentor Graphics, Geek, Engineer, Hardware, Technology, The Art of Storytelling

26 Sep, 2011

J VanDomelen Mentor Graphics’ Integrated Electrical Solutions Forum (IESF) for the military/aerospace (mil/aero) industry—a free, one-day event that was just held in Long Beach, Calif., on Sept. 13, 2011—was fantastic this year, just as I had expected. The speakers were top-notch and I learned a wealth about not only the current status and future outlook of the mil/aero market, but also the many challenges mil/aero … Read More

Software, Raytheon, Aerospace, Mentor.com, Mil-Aero, Milaero, Military, Aaron Shin, IESF, Electric, Integrated Electrical Solutions Forum, electrical, Mentor, Design Automation, Mentor Graphics, Geek, Engineer, Hardware, Technology, The Art of Storytelling

21 Aug, 2011

J VanDomelen This geek is excitedly gearing up for the Mentor Graphics Integrated Electrical Solutions Forum (IESF) for mil/aero design engineers, managers, and executives. Thank you to those who have written with questions. I would like to allay any concerns, such as those of professionals whom have previously been burned by or are skeptical of the value of free, vendor-hosted events. Fear not! Yet, I can understand … Read More

Hardware, Geek, IESF, Mil-Aero, Design Automation, Milaero, Military, Aerospace, Software, Integrated Electrical Solutions Forum, Embedded Systems, Mentor, Engineer, Mentor Graphics, Mentor.com, electrical

21 Aug, 2011

J VanDomelen Mentor Graphics’ free, must-attend mil/aero event is less than one month away. The company has announced the event’s agenda, which includes an impressive 23 sessions. The beauty of it is that attendees, of which I am one, can essentially build their own event, tailoring the day to their exact individual needs. To simplify things, however, Mentor Graphics officials have devised three breakout tracks … Read More

Geek, Engineer, Hardware, Computer, Mentor.com, COTS, Mil-Aero, Milaero, Aerospace, Military, IESF, Electronic, Integrated Electrical Solutions Forum, Embedded Systems, Mentor, Mentor Graphics, Design Automation

Valor MSS PCB Manufacturing Systems Solutions

Electrical & Wire Harness Design

Functional Verification

IC Manufacturing

IC Design

Mechanical Analysis

Silicon Test and Yield Analysis

System Modeling

Vehicle System Design

3D-IC Design and Test Solutions

Aerospace and Military Solutions

Accelerating ARM-based Design

Automotive Solutions

Foundry Solutions

Recent Comments