Sign In
Forgot Password?
Sign In | | Create Account

Mentor Blogs

Posts tagged with 'Design for Manufacturing'

17 Jun, 2014

Jay Gorajia Tired of entering the same recommendations and descriptions for design DFM issues found over and over again!!! You are not alone. If you are one of the hundreds out there that are responsible for providing feedback for PCB Design issues, read on! As the manufacturing expertise moves away from the design organizations and into the manufacturing organizations, effective collaboration tools are needed … Read More

DFx, DFMA, Design for Manufacturing, Design Quality

15 Jan, 2014

Shelly Stalnaker What’s coming in 2014? What new challenges await? Are you ready? Get a heads-up on some of the trends and events of the next 12 months with two articles. First, if you’re contemplating, or already working on, 2.5D and 3D ICs, you should take a look at 3D IC Design: Outlook for 2014 on 3D InCites. Written by Joseph Sawicki, this article can help you prepare for your 3D IC implementations. … Read More

Design for Manufacturing, Calibre, Design Rule Checking, 14nm, IC Design, 16nm, IC Verification, MEMs, 10nm, Physical Verification, 3D-IC, DRC, 3DIC, FinFET, 2.5D, Foundry, 20nm

20 Nov, 2009
IC Design

IBM Addresses Leakage

Posted by David Abercrombie

David Abercrombie

In case you missed the webinar by Jim Culp on November 3rd, I wanted to give you an opportunity to see what you missed. Jim is a Senior Engineer in IBM’s Advanced Physical Design and Technology Integration team. He is leading a team in the development of Parametric DFM and the mitigation of Circuit Limited Yield (CLY). During the webinar he discussed how CLY is becoming the leading contributor to yield

Read More

Physical Verification, DRC, Leakage, IC Design, Design Quality, IC Verification, Design for Manufacturing

20 Aug, 2009

David Abercrombie I got some questions from my last installment of this series asking for some pictures of defects that caused yield issues in production that could have been avoided during design. It struck me that most designers probably never get a chance to see the manufacturing problems their designs encounter. Since my background is in the fab, I wrongly assumed everyone had lived through the same pain as myself. … Read More

Reliability, IC Verification, Design Quality, Design for Manufacturing, Scoring, Design Rules, IC Design, Physical Verification, Design Rule Checking

6 Aug, 2009
IC Design

David's DAC09 - Lunch & Learn

Posted by David Abercrombie

David Abercrombie My Monday started off well delivering the eqDRC presentation with Jim Culp. But I didn’t have long to enjoy it as I had to quickly head up to the mezzanine level to get ready for my lunch and learn event with ARM and Chartered. We have had a long relationship with both companies and we finally arranged to do a joint presentation on how we have collaborated to make more DFM compliant IP. It started … Read More

Design Quality, Design for Manufacturing, IP, Physical Verification

4 Aug, 2009
IC Design

David's DAC09 - White Paper Session

Posted by David Abercrombie

David Abercrombie I felt privileged this year to get a paper accepted into the technical track at DAC. It seems more and more difficult to get something through. I think they said they only had a 20% acceptance rate this year. I was glad to get to present this one because it was fun doing the experimentation for it and I think it helps answer one of the nagging questions I always get about eqDRC. I worked with Fedor … Read More

IC Verification, IC Design, DAC, Design Quality, Design for Manufacturing, Design Rules, DRC, Physical Verification, Design Rule Checking

31 Jul, 2009
IC Design

David's DAC09 - Another Special Guest

Posted by David Abercrombie

David Abercrombie Well, day two of DAC started a little earlier than the first day. I had to attend the speakers breakfast for the paper I was going to give later that day. However, after breakfast I had my 9am suite presentation on eqDRC again and I also had a special guest again. This time it was Robert Boone from Freescale in Austin, TX. He works in the DFM team and he also agreed to come tell everyone what he and … Read More

Reliability, IC Verification, Physical Verification, Design for Manufacturing, DAC, DRC, IC Design, Improvability, Design Rule Checking, Design Rules

28 Jul, 2009
IC Design

David's DAC09 - Off to a great start!

Posted by David Abercrombie

David Abercrombie Well it felt familiar to be back in San Francisco for DAC this year. However, I wasn’t ready for the cold. It was 100 degrees in Portland when I left and I always assume the Bay area will be warmer. Luckily I looked at the weather map before I finished packing and replaced my short sleeve shirts with long sleeve ones. I didn’t get in until late Sunday night so I only had time for a dinner in the Westin … Read More

IC Verification, IC Design, Design Quality, Design for Manufacturing, DAC, Design Rules, Leakage, DRC, Physical Verification, Design Rule Checking

2 Jul, 2009
IC Design

To Waive Or Not To Waive?

Posted by David Abercrombie

David Abercrombie That is the question! If you read my colleague John’s most recent posting “Waive of the future?”, you will understand the question. I was equally shocked as John to find that almost no one tapes out DRC clean anymore. I would add one other reason to John’s list as to why this has happened. I think the traditional DRC rules are broken. Please read my first post “Are Design Rules Broken?” for my stance … Read More

IC Verification, IC Design, Design Quality, Design for Manufacturing, Design Rules, DRC, Physical Verification, Design Rule Checking

19 Jun, 2009

David Abercrombie One of the fundamental questions everyone asks about DFM is “why should I do it?” On the one hand this always strikes me as a funny question. I always look at DFM in the same way I think of automobile safety. Statistically, most people never get in a serious accident. So why would you spend so much money on airbags, antilock brakes, better seat belts, side door reinforcements, traction control, etc. … Read More

Design Quality, Design for Manufacturing, IC Verification, Reliability, Physical Verification, IC Design

5 Jun, 2009
IC Design

DFM for Non-PhDs

Posted by David Abercrombie

David Abercrombie

I got a kick out of Rohan’s comment on my previous blog (How do you define DFM?).  It is too easy to assume that anyone knows what you are talking about when you say DFM.  Just because everyone has been talking about it doesn’t mean any of them know what they are talking about. You could probably infer from my approach to the previous blog that my background is primarily on the manufacturing side.

Read More

IC Design, IC Verification, Design Quality, Reliability, Design for Manufacturing

19 May, 2009
IC Design

How do you define DFM?

Posted by David Abercrombie

David Abercrombie What does design for manfuacturing (DFM) mean to you? “More work to do!” “Someone else’s problem!” “Just more design constraints!” “The fab guys are expecting me to understand the process as well as design!” I propose that we define DFM (design for mfg) as an attempt to trasfer a way of doing business that has been tried and tested in the manufacturing space for years, into the design space. The fabs … Read More

Design Quality, Design for Manufacturing, Physical Verification

Embedded Software

PCB Design

Valor PCB Manufacturing Systems Solutions

Electrical & Wire Harness Design

Functional Verification

IC Manufacturing

IC Design

Mechanical Analysis

Silicon Test and Yield Analysis

System Modeling

Vehicle System Design

3D-IC Design and Test Solutions

Aerospace and Military Solutions

Accelerating ARM-based Design

Automotive Solutions

Fabless/Foundry Ecosystem Solutions

Recent Comments