Sign In
Forgot Password?
Sign In | | Create Account

Mentor Blogs

Posts tagged with 'documentation'

17 Apr, 2014

Mark Laing Hi there Great show this year in Las Vegas for Apex. Hall was full of exhibitors and the traffic was good on all days. One of our themes this year was reducing the chaos of all the many part and package libraries that are created and managed to support PCB manufacturing. I spoke with Andy Shaughnessy on the iConnect booth about this. Please click on the link below to view the interview. Please let me … Read More

package libraries, part libraries, apex, AXI, VPL, AOI, Flying Probe, libraries, process preparation, documentation

27 Feb, 2014

Mark Laing Hi there IPC Apex 2014 in Las Vegas is only a few weeks away, being the week of March 23rd. I'll be presenting at the PCB Designers Forum on the morning of Monday 23rd and then be attending the Exhibition for the following days at Booth 617. I hope you will be able to make the trip to Las Vegas and attend the show and the presentations. If so please stop by our booth and introduce yourself so we can … Read More

Las Vegas, IPC Apex, Design For Test, vPlan, ICT, process, documentation, programming, Exhibition

23 Oct, 2013

Mark Laing Hi there November 12th is the start of Productronica, the show for PCB Manufacturers in Munich, Germany. I hope to be able to meet a number of our existing customers as well as plenty of new ones looking to improve their design to manufacturing NPI flow with our tools. We’ll be showing the upcoming release of MSS at the show. New DFT capability will be available along with an all new programming … Read More

NPI, New Product Introduction, data preparation, vPlan, Design For Test, Productronica, Munich, programming, Trade Show, documentation

30 Sep, 2013

Mark Laing Hi there The first in a series of three webinars is now available on Mentor.com where David Wiens and myself promote Best Practices for PCB New Product Introduction. We discuss six steps that should be used to improve the speed of introducing new products in to manufacturing for both PCB designers and process engineers alike. One of the most beneficial areas for PCB Designers is to take control of the … Read More

data preparation, NPI, documentation, New Product Introduction

28 Jun, 2013

Mark Laing Hi there Last year we held a very successful Process Preparation seminar in Switzerland for our central European users. This year the seminar will be held in Frankfurt, Germany on September 23-24. The focus will be on the capability provided by Valor MSS Process Preparation so areas such as Data Preparation, SMT Programming, Test Programming, Inspection Programming, Assembly Documentation and Stencil … Read More

programming, data preparation, process, vPlan, documentation

18 Jun, 2013

Mark Laing Hi there I have had many conversations with manufacturing people over the years regarding the various files that are created from design that are provided to them for the purposes of assembly and test. It is not unusual to hear about a file set consisting of Gerbers, Drill, IPC 356 Netlist, Centroid, BOM, Intelligent layout, various documentation files and other machine specific format files that continue … Read More

process, Automated Optical Inspection, mixed vendor, ODB++, documentation, BOM, Flying Probe, ICT, Automated X-Ray Inspection, bill of materials, Design For Test, data preparation, programming, vPlan

2 Apr, 2013

Mark Laing Hi there One of the areas that we constantly look to enhance with each release is our support for the machines that are in use with our customers. Although we use the Mentor Ideas site as a opportunity to derive feedback from yourselves, I also wanted to take this chance to ask you to let me know which machines you still need us to support either because they are new to the market or needed to address … Read More

AOI, Enhancement, Flying Probe, ICT, AXI, data preparation, bill of materials, Design For Test, Automated Optical Inspection, Automated X-Ray Inspection, documentation, boundary scan, BOM, process, vPlan, SPI, THT, Solder Paste Inspection, programming

5 Mar, 2013

Mark Laing Hi there We recently had a successful trade show at Apex 2013 in San Diego. During the event I was interviewed with iConnect PCB007′s Andy Shaughnessy. We discussed the main themes that we were promoting on the booth in the area of Process Preparation, namely being able to use a single solution for all areas of PCB manufacturing data preparation as well as simplying the many types of part library … Read More

IPC, vPlan, AOI, documentation, Flying Probe, ICT, AVL, data preparation, AXI, Design For Test, Automated Optical Inspection, Automated X-Ray Inspection, BOM, bill of materials, testability, SPI, Solder Paste Inspection, programming, process

21 Feb, 2013

Mark Laing Hi there The Valor team are here in San Diego at the IPC Apex Trade Show. We’ve had a great couple of days, meeting our customers, plenty of new ones as well as meeting with some of the other vendors at the show. Our theater presentations have been well received, bringing people in to the booth and then stopping afterwards, asking questions and looking for more information. If you are at the show … Read More

Enhancement, documentation, programming, Solder Paste Inspection, AOI, Design For Test, SPI, apex, stencil, testability, Automated Optical Inspection, VPL, BOM, Automated X-Ray Inspection, vPlan, boundary scan, approved vendor list, data preparation, AXI, AVL, bill of materials, Flying Probe, Planning, mixed vendor, OIB, IPC, ICT

4 Feb, 2013

Mark Laing Hi there We have just released a new version of Valor MSS (11.3) that brings a number of significant enhancements to existing customers as well as those looking to invest in cutting edge process preparation solutions. I’ll be covering some of these enhancements in more detail in future blogs but here is a short summary of some of the new capability that we have in 11.3. We have made significant … Read More

OIB, mixed vendor, vPlan, AOI, Flying Probe, ICT, BOM, AVL, documentation, bill of materials, Enhancement, Design For Test, data preparation, VPL, testability, stencil, programming, Planning, process

29 Jan, 2013

Mark Laing Hi there Next month on February 19th, 20th and 21st is the annual IPC Apex Convention in San Diego and there will be more than 400 exhibitors from 50 different countries represented at the show. Here are five reasons you should attend: 1. The Valor Division of Mentor Graphics will be exhibiting at booth 1227. So, you will be able to meet the U.S. sales team as well as some of the Product Line personnel … Read More

mixed vendor, AOI, Flying Probe, apex, ICT, IPC, bill of materials, BOM, approved vendor list, documentation, data preparation, Design For Test, vPlan, stencil, Sequence, programming, san diego, process

2 Jan, 2013

Mark Laing Hi there Firstly, let me wish you all a Happy New Year and Best Wishes for 2013. I appreciate everyone taking the time to read my blog and to also comment on the areas that we have discussed. This week I am going to continue on from my theme from the last posting where I discussed the auto-generation capability in Valor MSS Process Preparation. I described the capability to create machine specific SMT … Read More

documentation, mixed vendor, programming, AVL, vPlan, approved vendor list, Planning, data preparation, process, bill of materials, BOM

18 Dec, 2012

Mark Laing Hi there I have talked about the Valor MSS unique capability to use the Valor Parts Library or VPL in multiple ways during PCB manufacturing. VPL data is manufacturer specific information about the actual component body and pin areas that can be used for multiple uses across DFM, Stencil, Documentation, SMT programming, test programming and inspection programming. I’d like to focus the specifics … Read More

Sequence, programming, AVL, mixed vendor, bill of materials, process, documentation, data preparation, Flying Probe, Design For Test, BOM, vPlan, stencil, VPL

27 Nov, 2012

Mark Laing Hi there I have talked to a number of users who are asking for capability to manage the Process Preparation needs of multiple locations around the world. I would like to hear from you on what requirements you consider important to this discussion. For example we have some customers running a single database across multiple locations allowing them to share data across all their facilities. One downside … Read More

programming, ICT, AVL, multi-site, data preparation, documentation, bill of materials, Flying Probe, BOM, Design For Test, database, server, testability, vPlan

20 Nov, 2012

Mark Laing Hi there It has been a few months since we launched the World Class Process Preparation Webinar including a video of an overall product demonstration. Over the past couple of months I have met with a number of people who implemented the Valor MSS Process Preparation solution and are achieving the efficiencies and improvements that we describe in the Webinar. Therefore I would like to provide you with … Read More

mixed vendor, AOI, Flying Probe, ICT, BOM, boundary scan, AVL, bill of materials, documentation, data preparation, Design For Test, vPlan, Planning, testability, VPL, stencil, programming, process

Valor MSS PCB Manufacturing Systems Solutions

Electrical & Wire Harness Design

Functional Verification

IC Manufacturing

IC Design

Mechanical Analysis

Silicon Test and Yield Analysis

System Modeling

Vehicle System Design

3D-IC Design and Test Solutions

Aerospace and Military Solutions

Accelerating ARM-based Design

Automotive Solutions

Foundry Solutions

Recent Comments