After a week of uncertainty, the skies above Europe have finally opened (albeit slowly) to air traffic. Thanks to this pesky plume of volcano ash from Iceland, all of Europe has come to a complete standstill. At a micro level, I have been enjoying the quiet — no jet engines screeching overhead every few minutes. At a macro level, this couldn’t have happened at a worst time for a recovering world economy. … Read More
Mentor Blogs
Posts tagged with 'Flow Field'
I’m the first to admit that I’m no Julia Child – but from time to time I get the baking bug … especially around the holidays. I love the smell of holiday baking… cinnamon and cloves and mix them in with the smell of a live Christmas tree … divine. Unfortunately holiday baking is a bit of a hassle because I have to keep a keen watch over the goodies in the oven and turn them around to make sure they … Read More
Visualize, CFD, Airflow, Flow Field, Design Engineer, Fan-Assisted Oven
Flow field around an F1 car. Image courtesy of Voxdale.
For the past few days, I’ve been on the road. Flying to the States is always an adventure … especially during late fall. Air turbulence isn’t much fun – somehow the flight always gets the bumpiest when they serve drinks/food. Go figure. Anyway, during this last flight, I sat next to the window. The flight from San Francisco to Portland was perfectly … Read More
-
Simple measurements of software trace data using Sourcery Analyzer
Brad Dixon (Posted 5/22/13) -
Open source components for your embedded platform SDK
Anil Khanna (Posted 5/21/13) -
Book review [part 1]
Colin Walls (Posted 5/20/13) - All Blog Posts
-
Where Is The Manufacturing World Coming To?
Michael Ford (Posted 5/16/13) -
Retain your existing investment in assembly programs even if you change your machines
Mark Laing (Posted 5/14/13) -
How do you manage your assembly variants?
Mark Laing (Posted 5/8/13) - All Blog Posts
-
A deep dive into automotive interface design
John Day (Posted 5/22/13) -
Estimating wiring harness costs in seconds
John Day (Posted 5/9/13) -
A pickup truck with park assist and a lot more
John Day (Posted 5/6/13) - All Blog Posts
-
OVM Gets Connected
Dennis Brophy (Posted 9/10/12) -
The floating point argument
Colin Walls (Posted 9/10/12) -
Open Stand & EDA Standardization
Dennis Brophy (Posted 8/28/12) - All Blog Posts
-
Part 1: The 2012 Wilson Research Group Functional Verification Study
Harry Foster (Posted 5/8/13) -
Those nasty wire’s and reg’s in Verilog
Dave Rich (Posted 5/3/13) -
Getting AMP’ed Up on the IEEE Low-Power Standard
Dennis Brophy (Posted 4/29/13) - All Blog Posts
-
Battle of Fins and BOXes
Arvind Narayanan (Posted 12/7/12) -
TSMC 28nm yield (SemiWiki)
Simon Favre (Posted 3/5/12) -
DAC 2011 is upon us!
Simon Favre (Posted 5/11/11) - All Blog Posts
-
Why Not Just Shove a Heatsink on Top of it? Part 2: Heat Flow Budgets
Robin Bornoff (Posted 5/15/13) -
Why Not Just Shove a Heatsink on Top of it? Part 1
Robin Bornoff (Posted 5/13/13) -
Hot Off the Press
Nazita Saye (Posted 5/3/13) - All Blog Posts
-
PADS Tips and Tricks: Building a PCB Decal with Polar Patterns
Jim Martens (Posted 5/13/13) -
Interactive Routing in the PADS ES Suite
Jim Martens (Posted 5/9/13) -
Schematic Capture in the PADS ES Suite video release
Gary Lameris (Posted 5/3/13) - All Blog Posts
-
Engineering Muscle Memory
Mike Jensen (Posted 5/21/13) -
EDA vs. Windows 8
Mike Jensen (Posted 5/6/13) -
VHDL-AMS Stress Modeling – Part 3
Mike Jensen (Posted 3/25/13) - All Blog Posts
-
U.S. DOT launches large V2V and V2I test
John Day (Posted 8/23/12) -
Did you know this?
John Day (Posted 6/25/12) -
Why aren’t tools from different suppliers easier to integrate?
John Day (Posted 6/19/12) - All Blog Posts
-
To Infinity and Beyond
J VanDomelen (Posted 4/30/13) -
Warp Factor 10, Mr. Sulu
J VanDomelen (Posted 4/25/13) -
Bombardier Steps Up to the Big Boys
J VanDomelen (Posted 4/20/13)
-
Instant Replay for Debugging SoC Level Simulations
Mark Olen (Posted 12/13/11) -
GENIVI development strategy requires competitors to cooperate
John Day (Posted 11/10/11) -
ARM Development Conference
Colin Walls (Posted 7/4/11)
-
A deep dive into automotive interface design
John Day (Posted 5/22/13) -
Estimating wiring harness costs in seconds
John Day (Posted 5/9/13) -
A pickup truck with park assist and a lot more
John Day (Posted 5/6/13)
-
How do you define DFM?
David Abercrombie (Posted 5/19/09) -
Are Design Rules Broken?
David Abercrombie (Posted 5/15/09)
Recent Comments
- Rankingoptimierung said Thank you so much considerably intended for reveal... in ABV and people from Missouri...
- Dave Rich said I know a few companies that have gone to the troub... in SystemVerilog Coding Guidelines
- Linc Jepson said Dave, It's almost 4 years after this post. As fa... in SystemVerilog Coding Guidelines
- simmons10 vigorda said What to Look for in a Hard Drive That You Are Purc... in Shortening Design Cycles With Concurrent Engineering
- HMR said I am a bit worried some publications I have recent... in A Load of HVAC TLAs
- Byron Blackmore said A project XML file will have a element, and an as... in FloTHERM and its new XML neutral file format
- max lai said Heated Block Example Steel (Mild) 6.3000... in FloTHERM and its new XML neutral file format
- max lai said Can "xml_case" tag makes it a project XML? becaus... in FloTHERM and its new XML neutral file format
- max lai said Can tag makes it a project XML? because it seems ... in FloTHERM and its new XML neutral file format
- Ramesh Sedam said Am very new to UVM and stuck with this error.. ple... in Using the UVM 1.0 Release with Questa
Tags
Blogs by Design Area
- Embedded Software
- Valor MSS PCB Manufacturing Systems Solutions
- Electrical & Wire Harness Design
- FPGA
- Functional Verification
- IC Design
- Mechanical Analysis
- PCB Design Software & Tools
- System Modeling
- Vehicle System Design
Mentor Blog Authors
-
Jim Martens
-
Harry Foster
-
John Day
-
J VanDomelen
-
Nazita Saye
-
Dave Rich
-
Michael Ford
-
Robin Bornoff
-
Dennis Brophy
-
Mike Jensen
-
Colin Walls
-
Mark Laing
-
Andrew Patterson
-
Phil Burr
-
Matt Radochonski
-
Anil Khanna
-
Kamran Shah
-
Gary Lameris
-
Randall Myers
-
Christopher Hallinan
-
Jamie Little
-
Brad Dixon
-
Ricardo Anguiano
-
admin
-
Gene Forte