In the world of computers, I have always felt that USB is one of the good things of life. It [mostly] just works and simplifies our lives. As USB has been around quite a few years, it is hard to remember what life was like before. It is interesting technology, because, as it is so easy to use, it is easy to forget how complex it is “under the hood”. This is a topic that I have talked about … Read More
Mentor Blogs
Posts tagged with 'Nucleus USB'
I recently wrote about the USB standards and how, with each generation, increased speed has become available. This provoked some discussion about the actual data throughput, which is quite a complex topic. The “U” in “USB” stands for “universal” and the interface was designed to accommodate a very wide range of different peripheral devices, with very divergent needs in terms of data transfer - speed, … Read More
I have commented before on “fashions” in the embedded software world and part of my job is to understand what the hot topics among embedded developers are. A subject that just seems to run and run is USB. I posted about it a while back and promised to write more. In the meantime, we ran a Web seminar, which broke records for attendance, and published a new tech paper, which has proven incredibly popular.
I … Read More
Last week we ran a Web seminar about USB. It was very popular. We offered two shows and had well over 2000 registrations and hundreds of people attended each event - in one case the web seminar “room” was full. I hope that not too many people were disappointed. If you were there, thanks for coming along. If you were not and would like to hear about USB, the archived recording is online here.
In these … Read More
In last week’s blog I talked about what was going on at Embedded World and made some observations about what seemed to be “hot”. I have been thinking about this and wondering which topics, technologies or products embedded software engineers actually think are important, interesting or exciting. Obviously trend surveys and the like give some indication, but I realized that I already had a tool at my … Read More
Today, for a change, instead of discussing some embedded software technology, I would like to put forward a concept for a product. It is an embedded system, which I believe could sell in high volumes. Maybe someone reading this blog would like to develop it. I am happy to waive any rights to royalties on the idea so long as we have an understanding that you will use Mentor Graphics products in your … Read More
Nucleus, Wi-Fi, RTOS, Development Tools, Nucleus USB, Nucleus Kernel, USB
I love USB.
I have worked with PCs since The Beginning, and I remember how it used to be. I would buy new peripheral device, spend lots of time and effort ripping apart my PC to install the card and then start worrying about software, drivers etc. It took for ever. By the time I had finished, any excitement I had about this new cool device had long since evaporated.
USB changed all that. Nowadays, … Read More
-
Book review [part 1]
Colin Walls (Posted 5/20/13) -
Smart Energy Profile (SEP) 2.0 specification released – What this means to you?
Anil Khanna (Posted 5/15/13) -
When an Innovative Plan Works!
Jamie Little (Posted 5/14/13) - All Blog Posts
-
Where Is The Manufacturing World Coming To?
Michael Ford (Posted 5/16/13) -
Retain your existing investment in assembly programs even if you change your machines
Mark Laing (Posted 5/14/13) -
How do you manage your assembly variants?
Mark Laing (Posted 5/8/13) - All Blog Posts
-
Estimating wiring harness costs in seconds
John Day (Posted 5/9/13) -
A pickup truck with park assist and a lot more
John Day (Posted 5/6/13) -
To Infinity and Beyond
J VanDomelen (Posted 4/30/13) - All Blog Posts
-
OVM Gets Connected
Dennis Brophy (Posted 9/10/12) -
The floating point argument
Colin Walls (Posted 9/10/12) -
Open Stand & EDA Standardization
Dennis Brophy (Posted 8/28/12) - All Blog Posts
-
Part 1: The 2012 Wilson Research Group Functional Verification Study
Harry Foster (Posted 5/8/13) -
Those nasty wire’s and reg’s in Verilog
Dave Rich (Posted 5/3/13) -
Getting AMP’ed Up on the IEEE Low-Power Standard
Dennis Brophy (Posted 4/29/13) - All Blog Posts
-
Battle of Fins and BOXes
Arvind Narayanan (Posted 12/7/12) -
TSMC 28nm yield (SemiWiki)
Simon Favre (Posted 3/5/12) -
DAC 2011 is upon us!
Simon Favre (Posted 5/11/11) - All Blog Posts
-
Why Not Just Shove a Heatsink on Top of it? Part 2: Heat Flow Budgets
Robin Bornoff (Posted 5/15/13) -
Why Not Just Shove a Heatsink on Top of it? Part 1
Robin Bornoff (Posted 5/13/13) -
Hot Off the Press
Nazita Saye (Posted 5/3/13) - All Blog Posts
-
PADS Tips and Tricks: Building a PCB Decal with Polar Patterns
Jim Martens (Posted 5/13/13) -
Interactive Routing in the PADS ES Suite
Jim Martens (Posted 5/9/13) -
Schematic Capture in the PADS ES Suite video release
Gary Lameris (Posted 5/3/13) - All Blog Posts
-
EDA vs. Windows 8
Mike Jensen (Posted 5/6/13) -
VHDL-AMS Stress Modeling – Part 3
Mike Jensen (Posted 3/25/13) -
VHDL-AMS Stress Modeling - Part 2
Mike Jensen (Posted 1/28/13) - All Blog Posts
-
U.S. DOT launches large V2V and V2I test
John Day (Posted 8/23/12) -
Did you know this?
John Day (Posted 6/25/12) -
Why aren’t tools from different suppliers easier to integrate?
John Day (Posted 6/19/12) - All Blog Posts
-
To Infinity and Beyond
J VanDomelen (Posted 4/30/13) -
Warp Factor 10, Mr. Sulu
J VanDomelen (Posted 4/25/13) -
Bombardier Steps Up to the Big Boys
J VanDomelen (Posted 4/20/13)
-
Instant Replay for Debugging SoC Level Simulations
Mark Olen (Posted 12/13/11) -
GENIVI development strategy requires competitors to cooperate
John Day (Posted 11/10/11) -
ARM Development Conference
Colin Walls (Posted 7/4/11)
-
Estimating wiring harness costs in seconds
John Day (Posted 5/9/13) -
A pickup truck with park assist and a lot more
John Day (Posted 5/6/13) -
If you’re in Europe this summer
John Day (Posted 4/29/13)
-
How do you define DFM?
David Abercrombie (Posted 5/19/09) -
Are Design Rules Broken?
David Abercrombie (Posted 5/15/09)
Recent Comments
- Dave Rich said I know a few companies that have gone to the troub... in SystemVerilog Coding Guidelines
- Linc Jepson said Dave, It's almost 4 years after this post. As fa... in SystemVerilog Coding Guidelines
- simmons10 vigorda said What to Look for in a Hard Drive That You Are Purc... in Shortening Design Cycles With Concurrent Engineering
- Emerald Winburn said I like a lot the way of your writing, I think that... in PCB Developers are the Unsung Heroes of Innovation!
- HMR said I am a bit worried some publications I have recent... in A Load of HVAC TLAs
- Byron Blackmore said A project XML file will have a element, and an as... in FloTHERM and its new XML neutral file format
- max lai said Heated Block Example Steel (Mild) 6.3000... in FloTHERM and its new XML neutral file format
- max lai said Can "xml_case" tag makes it a project XML? becaus... in FloTHERM and its new XML neutral file format
- max lai said Can tag makes it a project XML? because it seems ... in FloTHERM and its new XML neutral file format
- Ramesh Sedam said Am very new to UVM and stuck with this error.. ple... in Using the UVM 1.0 Release with Questa
Tags
Blogs by Design Area
- Embedded Software
- Valor MSS PCB Manufacturing Systems Solutions
- Electrical & Wire Harness Design
- FPGA
- Functional Verification
- IC Design
- Mechanical Analysis
- PCB Design Software & Tools
- System Modeling
- Vehicle System Design
Mentor Blog Authors
-
Jim Martens
-
Harry Foster
-
John Day
-
J VanDomelen
-
Nazita Saye
-
Dave Rich
-
Michael Ford
-
Robin Bornoff
-
Dennis Brophy
-
Mike Jensen
-
Colin Walls
-
Mark Laing
-
Andrew Patterson
-
Phil Burr
-
Matt Radochonski
-
Anil Khanna
-
Kamran Shah
-
Gary Lameris
-
Randall Myers
-
Christopher Hallinan
-
Jamie Little
-
Brad Dixon
-
Ricardo Anguiano
-
admin
-
Gene Forte