Sign In
Forgot Password?
Sign In | | Create Account

Mentor Blogs

Posts tagged with 'process'

26 Feb, 2013

Mark Laing Hi there I recently discussed the new capability in Valor MSS Process Preparation 11.3. I mentioned that I would go in to more detail on some of the areas that are part of this version and I will cover the new Test Probe Placement capability today. We have added an all new Test Probe Placement Session in 11.3 that performs the physical test probe placement analysis natively within the application. This … Read More

AOI, Flying Probe, ICT, AXI, data preparation, bill of materials, Design For Test, Automated Optical Inspection, Automated X-Ray Inspection, boundary scan, BOM, process, vPlan, testability, VPL

12 Feb, 2013

Mark Laing Hi there Last week I discussed the new capability in Valor MSS Process Preparation 11.3. I mentioned that I would go in to more detail on some of the areas that are part of this version and I will start with our new capability for inspection machines. There are three main types of automated inspection machines, Automated Optical Inspection (AOI), Automated X-Ray Inspection (AXI) and Solder Paste Inspection … Read More

data preparation, AOI, aperture, Solder Paste Inspection, SPI, stencil, Automated X-Ray Inspection, AXI, process, Automated Optical Inspection

4 Feb, 2013

Mark Laing Hi there We have just released a new version of Valor MSS (11.3) that brings a number of significant enhancements to existing customers as well as those looking to invest in cutting edge process preparation solutions. I’ll be covering some of these enhancements in more detail in future blogs but here is a short summary of some of the new capability that we have in 11.3. We have made significant … Read More

OIB, mixed vendor, vPlan, AOI, Flying Probe, ICT, BOM, AVL, documentation, bill of materials, Enhancement, Design For Test, data preparation, VPL, testability, stencil, programming, Planning, process

29 Jan, 2013

Mark Laing Hi there Next month on February 19th, 20th and 21st is the annual IPC Apex Convention in San Diego and there will be more than 400 exhibitors from 50 different countries represented at the show. Here are five reasons you should attend: 1. The Valor Division of Mentor Graphics will be exhibiting at booth 1227. So, you will be able to meet the U.S. sales team as well as some of the Product Line personnel … Read More

mixed vendor, AOI, Flying Probe, apex, ICT, IPC, bill of materials, BOM, approved vendor list, documentation, data preparation, Design For Test, vPlan, stencil, Sequence, programming, san diego, process

8 Jan, 2013

Mark Laing Hi there Some of you have responsibility for production planning but it may also be handled in other groups. We are hosting a webinar on the often ignored area of production planning next week. I’d urge you to register for this event and let other people in your organization know about it who might benefit from hearing what solutions we have as part of Valor MSS. Below is the link to register … Read More

Sequence, vPlan, production, Planning, process

2 Jan, 2013

Mark Laing Hi there Firstly, let me wish you all a Happy New Year and Best Wishes for 2013. I appreciate everyone taking the time to read my blog and to also comment on the areas that we have discussed. This week I am going to continue on from my theme from the last posting where I discussed the auto-generation capability in Valor MSS Process Preparation. I described the capability to create machine specific SMT … Read More

documentation, mixed vendor, programming, AVL, vPlan, approved vendor list, Planning, data preparation, process, bill of materials, BOM

18 Dec, 2012

Mark Laing Hi there I have talked about the Valor MSS unique capability to use the Valor Parts Library or VPL in multiple ways during PCB manufacturing. VPL data is manufacturer specific information about the actual component body and pin areas that can be used for multiple uses across DFM, Stencil, Documentation, SMT programming, test programming and inspection programming. I’d like to focus the specifics … Read More

Sequence, programming, AVL, mixed vendor, bill of materials, process, documentation, data preparation, Flying Probe, Design For Test, BOM, vPlan, stencil, VPL

20 Nov, 2012

Mark Laing Hi there It has been a few months since we launched the World Class Process Preparation Webinar including a video of an overall product demonstration. Over the past couple of months I have met with a number of people who implemented the Valor MSS Process Preparation solution and are achieving the efficiencies and improvements that we describe in the Webinar. Therefore I would like to provide you with … Read More

mixed vendor, AOI, Flying Probe, ICT, BOM, boundary scan, AVL, bill of materials, documentation, data preparation, Design For Test, vPlan, Planning, testability, VPL, stencil, programming, process

6 Nov, 2012

Mark Laing Hi there I have been posting comments on my blog now for a number of months. The topics have been based on the feedback and conversations I’ve had with many users of Process Engineering software, both Mentor Graphics and non-Mentor Graphics products, all around the world. Many of you have also taken the time to add comments on these postings which I really appreciate. I’d like to open up … Read More

mixed vendor, AOI, Flying Probe, ICT, BOM, boundary scan, AVL, bill of materials, documentation, data preparation, Design For Test, Planning, testability, vPlan, stencil, programming, process

23 Oct, 2012

Mark Laing Hi there The configuration of SMT lines has changed a number of times over the years. A few years ago lines were configured with a best-in-class requirement, where the line was configured with the chip shooters being supplied from one vendor and the fine pitch machines being from another vendor. In recent years though, may be with the introduction of modular machines and dual line capability, there … Read More

process, programming, BOM, mixed vendor, vPlan, data preparation

2 Oct, 2012

Mark Laing Hi there I spent last week in the wonderful town of Zug about 45 minutes from Zurich in Switzerland. My European colleagues organized a two day seminar for over 60 of our Valor MSS Process Preparation customers at the Siemens facility in Zug. The agenda consisted of some Valor presentations, Valor demostrations of the upcoming software, presentations by actual users of the Process Preparation software … Read More

programming, AVL, process, AOI, data preparation, documentation, Flying Probe, bill of materials, ICT, BOM, Design For Test, vPlan, testability, VPL, stencil

31 Jul, 2012

Mark Laing Hi there This week sees the all new Valor MSS 11.2 version that supports all areas of PCB Process Engineering and Shop Floor. One of the new features of this release is the ability to include Automated Optical Inspection (AOI) machines in-line with the SMT placement machines. This provides the ability to create specific AOI programs depending on where the machine is in the line relative to the point … Read More

data preparation, approved vendor list, vPlan, AOI, BOM, process, AVL, programming, bill of materials

17 Jul, 2012

Mark Laing Hi there One of the least efficient areas in PCB assembly concerns the creation and management of package data that will be consumed across the shop-floor. For example DFM processes rely on accurate package data to determine component to component spacing issues or using accurate pin terminus contact data to ensure that solder joints will form correctly. Accurate package data is critical for DFT analysis … Read More

programming, AOI, bill of materials, mixed vendor, process, data preparation, documentation, Design For Test, Flying Probe, ICT, BOM, VPL, vPlan, stencil, testability

3 Jul, 2012

Mark Laing Hi there One of the largest groups of users within Valor MSS Process Preparation for SMT programming is those supporting ASM, formerly Siemens, pick and place machines. ASM has released their OIB interface as a single API for both programming and monitoring for external applications to use. This has the benefit for third party applications to have an open interface that can be programmed to consistently … Read More

process, programming, data preparation, ASM, SIPLACE, OIB, vPlan, mixed vendor

27 Jun, 2012

Mark Laing Hi there Spreadsheets are probably one of the most useful applications for computers. They were also the “killer app” that allowed computers to take off to the masses. So we have relied more and more on them for every day tasks. One area they are playing a role is in the prioritization of production work orders. It is not uncommon to have to determine which of hundreds of work orders each … Read More

process, Sequence, bill of materials, Planning, vPlan, BOM, data preparation

Valor MSS PCB Manufacturing Systems Solutions

Electrical & Wire Harness Design

Functional Verification

IC Manufacturing

IC Design

Mechanical Analysis

Silicon Test and Yield Analysis

System Modeling

Vehicle System Design

3D-IC Design and Test Solutions

Aerospace and Military Solutions

Accelerating ARM-based Design

Automotive Solutions

Foundry Solutions

Recent Comments