Mentor Blogs

Posts tagged with 'ral'

Blogs RSS

23 Sep, 2010

Accellera VIP-TSC Selects RAL for UVM 1.0 Register Package

Posted by Dennis Brophy

Mentor/Synopsys Collaboration Bears Fruit Two weeks back I shared information in a blog on collaboration between Mentor Graphics and Synopsys to reduce the number of candidate register packages being considered by the Accellera Verification IP (VIP) Technical Subcommittee (TSC). Mentor withdrew its candidate when all our requirements were able to be addressed in an update to the Synopsys RAL candidate. As … Read More

OVM, ral, Accellera, UVM, VIP-TSC

Functional Verification

7 Sep, 2010

UVM Register Package Candidate News

Posted by Dennis Brophy

Mentor Announces Collaboration with Synopsys on Joint Register Package Candidate Mentor has recently teamed with Synopsys to collaborate on the Synopsys RAL candidate to provide extensions that meet our register package requirements. Because of this, it allowed us to withdraw our candidate from consideration by the Accellera VIP-TSC recently. Further, as part of the Accellera VIP-TSC UVM development … Read More

OVM, ral, Accellera, verification methodolgy, VIP-TSC, Register Package, UVM

Embedded Software

Book review [part 1]
Colin Walls (Posted 5/20/13)
Smart Energy Profile (SEP) 2.0 specification released – What this means to you?
Anil Khanna (Posted 5/15/13)
When an Innovative Plan Works!
Jamie Little (Posted 5/14/13)
All Blog Posts

Valor MSS PCB Manufacturing Systems Solutions

Where Is The Manufacturing World Coming To?
Michael Ford (Posted 5/16/13)
Retain your existing investment in assembly programs even if you change your machines
Mark Laing (Posted 5/14/13)
How do you manage your assembly variants?
Mark Laing (Posted 5/8/13)
All Blog Posts

Electrical & Wire Harness Design

Estimating wiring harness costs in seconds
John Day (Posted 5/9/13)
A pickup truck with park assist and a lot more
John Day (Posted 5/6/13)
To Infinity and Beyond
J VanDomelen (Posted 4/30/13)
All Blog Posts

FPGA

OVM Gets Connected
Dennis Brophy (Posted 9/10/12)
The floating point argument
Colin Walls (Posted 9/10/12)
Open Stand & EDA Standardization
Dennis Brophy (Posted 8/28/12)
All Blog Posts

Functional Verification

Part 1: The 2012 Wilson Research Group Functional Verification Study
Harry Foster (Posted 5/8/13)
Those nasty wire’s and reg’s in Verilog
Dave Rich (Posted 5/3/13)
Getting AMP’ed Up on the IEEE Low-Power Standard
Dennis Brophy (Posted 4/29/13)
All Blog Posts

IC Design

Battle of Fins and BOXes
Arvind Narayanan (Posted 12/7/12)
TSMC 28nm yield (SemiWiki)
Simon Favre (Posted 3/5/12)
DAC 2011 is upon us!
Simon Favre (Posted 5/11/11)
All Blog Posts

Mechanical Analysis

Why Not Just Shove a Heatsink on Top of it? Part 2: Heat Flow Budgets
Robin Bornoff (Posted 5/15/13)
Why Not Just Shove a Heatsink on Top of it? Part 1
Robin Bornoff (Posted 5/13/13)
Hot Off the Press
Nazita Saye (Posted 5/3/13)
All Blog Posts

PCB Design Software & Tools

PADS Tips and Tricks: Building a PCB Decal with Polar Patterns
Jim Martens (Posted 5/13/13)
Interactive Routing in the PADS ES Suite
Jim Martens (Posted 5/9/13)
Schematic Capture in the PADS ES Suite video release
Gary Lameris (Posted 5/3/13)
All Blog Posts

System Modeling

EDA vs. Windows 8
Mike Jensen (Posted 5/6/13)
VHDL-AMS Stress Modeling – Part 3
Mike Jensen (Posted 3/25/13)
VHDL-AMS Stress Modeling - Part 2
Mike Jensen (Posted 1/28/13)
All Blog Posts

Vehicle System Design

U.S. DOT launches large V2V and V2I test
John Day (Posted 8/23/12)
Did you know this?
John Day (Posted 6/25/12)
Why aren’t tools from different suppliers easier to integrate?
John Day (Posted 6/19/12)
All Blog Posts

Aerospace and Military Solutions

To Infinity and Beyond
J VanDomelen (Posted 4/30/13)
Warp Factor 10, Mr. Sulu
J VanDomelen (Posted 4/25/13)
Bombardier Steps Up to the Big Boys
J VanDomelen (Posted 4/20/13)

Accelerating ARM-based Design

Instant Replay for Debugging SoC Level Simulations
Mark Olen (Posted 12/13/11)
GENIVI development strategy requires competitors to cooperate
John Day (Posted 11/10/11)
ARM Development Conference
Colin Walls (Posted 7/4/11)

Automotive Solutions

Estimating wiring harness costs in seconds
John Day (Posted 5/9/13)
A pickup truck with park assist and a lot more
John Day (Posted 5/6/13)
If you’re in Europe this summer
John Day (Posted 4/29/13)

Foundry Solutions

How do you define DFM?
David Abercrombie (Posted 5/19/09)
Are Design Rules Broken?
David Abercrombie (Posted 5/15/09)

Dave Rich said I know a few companies that have gone to the troub... in SystemVerilog Coding Guidelines
Linc Jepson said Dave, It's almost 4 years after this post. As fa... in SystemVerilog Coding Guidelines
simmons10 vigorda said What to Look for in a Hard Drive That You Are Purc... in Shortening Design Cycles With Concurrent Engineering
HMR said I am a bit worried some publications I have recent... in A Load of HVAC TLAs
Byron Blackmore said A project XML file will have a element, and an as... in FloTHERM and its new XML neutral file format
max lai said Heated Block Example Steel (Mild) 6.3000... in FloTHERM and its new XML neutral file format
max lai said Can "xml_case" tag makes it a project XML? becaus... in FloTHERM and its new XML neutral file format
max lai said Can tag makes it a project XML? because it seems ... in FloTHERM and its new XML neutral file format
Ramesh Sedam said Am very new to UVM and stuck with this error.. ple... in Using the UVM 1.0 Release with Questa
ulfat hussain said Provided link is not opening. Can u tell me what t... in Using the UVM 1.0 Release with Questa

Mentor Blogs

Posts tagged with 'ral'

Accellera VIP-TSC Selects RAL for UVM 1.0 Register Package

UVM Register Package Candidate News

Recent Comments

Tags

Blogs by Design Area

Mentor Blog Authors

The EDA Technology Leader™