Sign In
Forgot Password?
Sign In | | Create Account

Chartered and Mentor Graphics Team to Offer Technology Design Kits for 65 and 90 Nanometer Common Platform Technology Processes

Mixed-signal TDKs for 65 and 90 nanometer process technology based on new Mentor Graphics ICstudio design platform now available

WILSONVILLE, Ore. and Milpitas, Calif., May 31, 2007 – Mentor Graphics Corporation (Nasdaq: MENT) and Chartered Semiconductor Manufacturing (Nasdaq: CHRT and SGX-ST: Chartered), one of the world’s top dedicated semiconductor foundries, have partnered to offer a series of new mixed-signal Technology Design Kits (TDKs) supporting 65- and 90-nanometer (nm) process technology available from Chartered. The kits have been validated and are available now for use with Mentor Graphics ICstudio™ design platform. These open-source design kits enable IC design companies to rapidly set up their design environments and immediately focus on mixed-signal design and productivity gains on leading-edge technology from Chartered.

The new TDKs enable the entire analog mixed-signal IC design flow to be tailored for customers using Common Platform technology processes. The kits provide all the foundry data files and models for use with front-end and back-end IC design tools from Mentor Graphics. Designers can work within the unified design cockpit of Mentor’s ICstudio design environment to move seamlessly between designs in front-end logical and back-end physical domains.

“Access to optimized design platforms that shorten critical chip development cycles is of paramount importance to foundry customers facing the challenges of today’s market. Such challenges make Chartered’s open, third-party EDA and IP strategy even more relevant,” said Kevin Meyer, vice president of worldwide marketing and platform alliances at Chartered. “By combining Chartered’s production-proven mixed-signal processes with world-class EDA flows from Mentor Graphics, we allow our mutual customers to gain full control and predictability over SoC design and manufacturing to jump-start their designs and plan for aggressive tape-out and production schedules. This is their competitive advantage.”

“We understand the time-to-market pressures facing companies, and realize that their design engineers must focus on product development, rather than setting up IC design environments,” said Jue-Hsien Chern, vice president and general manager, Deep Submicron division at Mentor Graphics. “At Mentor, we’re committed to helping our customers maximize their productivity, especially as they move to more advanced semiconductor technologies in order to stay competitive in their markets. Our design kit collaboration with Chartered as a leading mixed-signal foundry yields a proven design-through-manufacturing flow that saves time and eliminates costly re-spins.”

“We are pleased to see the collaboration between Chartered and Mentor Graphics, as we see tremendous value being created for their end customers like us,” said Godfrey D’Souza, vice president of engineering at Cswitch Corporation. “At Cswitch, we develop configurable solutions that address the performance and time-to-market needs of network, telecom, and storage equipment manufacturers. Gaining collaborative support from our EDA and manufacturing suppliers like Mentor and Chartered will enable us to put more focus on advancing our development technologies, methodologies, and intellectual property base, especially as we move to the more advanced manufacturing process node on 65nm and beyond.”

Starting with 90nm generic and 65nm low-power nodes, Chartered and Mentor Graphics plan to broaden the TDK offerings to encompass 65 and 90nm process variants, as well as extend the development to 45nm. These TDKs tuned to the Common Platform technology processes from Chartered enable chip designers to immediately begin creating, simulating and verifying mixed-signal or analog transistor-level designs targeted for manufacturing at Chartered. Additionally, they are being validated by both companies in support of advanced technologies offered by Chartered. The design kits specifically include: pre-configured symbols and netlist configuration files for schematic capture, Eldo® analog simulation models for functional verification, process definition files and device generators for schematic-driven physical layout, and pre-validated Calibre® DRC™, Calibre LVS™ and Calibre xRC™ extraction rule files for final physical verification and parasitic extraction prior to chip manufacturing.

Mentor’s new ICstudio design environment contains a unified design platform with a centralized design cockpit that allows seamless navigation throughout the entire analog mixed-signal IC design flow, from schematic capture, simulation and floor planning, to physical layout and final verification.

Availability
The Mentor Graphics Technology Design Kits for 90nm generic and 65nm low-power processes from Chartered are available now. For more information, please visit either www.charteredsemi.com/design/tdks.asp or www.mentor.com/products/ic_nanometer_design/foundries/tdks.cfm.

About Chartered
Chartered Semiconductor Manufacturing (Nasdaq: CHRT, SGX-ST: CHARTERED), one of the world’s top dedicated semiconductor foundries, offers leading-edge technologies down to 65 nanometer (nm), enabling today's system-on-chip designs. The company further serves its customers’ needs through a collaborative, joint development approach on a technology roadmap that extends to 32nm. Chartered’s strategy is based on open and comprehensive design enablement solutions, manufacturing enhancement strategies, and a commitment to flexible sourcing. In Singapore, the company operates a 300mm fabrication facility and four 200mm facilities. Information about Chartered can be found at www.charteredsemi.com.

About Mentor Graphics
Mentor Graphics Corporation (Nasdaq: MENT) is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world’s most successful electronics and semiconductor companies. Established in 1981, the company reported revenues over the last 12 months of about $800 million and employs approximately 4,250 people worldwide. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com/.

(Mentor Graphics, Eldo and Calibre are registered trademarks and ICstudio, DRC, LVS and xRC are trademarks of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.)

For more information, please contact:
Carole Thurman
Mentor Graphics
503.685.4716
carole_thurman@mentor.com

Sonia Harrison
Mentor Graphics
503.685.1165
sonia_harrison@mentor.com

 
Online Chat