Sign In
Forgot Password?
Sign In | | Create Account

Fujitsu Semiconductor Standardizes on Mentor Graphics HyperLynx Signal Integrity Technology as LSI-PKG-PCB Co-Design Tool

WILSONVILLE, Ore., November 29, 2011 — Mentor Graphics Corporation (NASDAQ: MENT) today announced that Fujitsu Semiconductor has standardized on the Mentor Graphics® HyperLynx® Signal Integrity technology as the company’s LSI-IC Packaging (PKG)-Printed Circuit Board (PCB) co-design tool for fast and accurate high-speed simulation and analysis. For today's highly functional end-products, bus speeds are increasingly getting faster and the demand for noise timing-aware LSI-PKG-PCB co-design is increasing. Fujitsu Semiconductor adopted the HyperLynx product suite to address problems caused by high-speed signals throughout the design cycle, from early architectural stages through post-layout verification.

As a world-class semiconductor company, Fujitsu Semiconductor needed to address timing issues at three levels: LSI, PKG, and PCB, especially with the rapidly emerging DDR2/3/4 and SERDES interconnect standards. They selected the Mentor Graphics HyperLynx technology, widely adopted at many PCB design sites, as their robust signal and power integrity solution. They needed to standardize their LSI-PKG-PCB co-design environment with easy-to-use, yet highly accurate, simulation for global adoption. Fujitsu Semiconductor deployed HyperLynx for a special project in 2010, basing their standardization on the Mentor® HyperLynx product providing the leading signal and power integrity technology in the industry and Mentor’s ability to provide superior global customer support.

“Fujitsu Semiconductor is working with its customers and partners to provide solutions for the ever-evolving complexity of signal and power integrity issues in more advanced processes. We have positioned HyperLynx as our company and our customers' analysis tool that has been widely popular in our customers’ PCB design workflow, and in collaboration with Mentor Graphics, we developed a design kit that accurately and quickly analyzes the signal integrity and timing of PCBs by addressing the noise and timing influences of LSI and PKG on HyperLynx,” said Naoshi Higaki, Deputy
General Manager of SoC Design Engineering Division, Fujitsu Semiconductor Limited. “By using this design kit as our company and customers’ common environment, it enhances our customers' final products with higher reliability, design productivity, and cost-effective development.”

As memory bus speeds get faster, timing margins become more severe, impacting simultaneous switching noise and timing design. For good quality control and optimized performance, this affects the ICs, the packaging, and the printed boards. This includes traditional challenges such as signal crosstalk, over-shooting and under-shooting. Since the HyperLynx product is easy-to-use and provides an intuitive user interface, all members of the product development team (hardware engineers, PCB designers and signal integrity specialists) can use it, from pre-layout analysis and simulation to post-layout verification.

“We are honored to have our industry-leading HyperLynx technology selected as the standard signal integrity tool for Fujitsu based on their experiences in using our product the past year with excellent results,” said Henry Potts, Vice President and General Manager of the Mentor Graphics Systems Design Division. “Our unmatched levels of R&D investment in these leading design and analysis technologies enable us to meet our customers’ most advanced demands and, according to the EDA Consortium, have positioned us in the industry with over a 50% PCB systems design market share worldwide.”

To learn more about the Mentor’s HyperLynx advanced signal integrity analysis product, visit the company website at: http://www.mentor.com/pcb/hyperlynx

About Mentor Graphics

Mentor Graphics Corporation (NASDAQ: MENT) is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world’s most successful electronic, semiconductor and systems companies. Established in 1981, the company reported revenues over the last 12 months of about $915 million. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com/.

(Mentor Graphics, Mentor and HyperLynx are registered trademarks of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owner.)

For more information, please contact:

Larry Toda
Mentor Graphics
503.685.1664
larry_toda@mentor.com

Suzanne Graham
Mentor Graphics
503.685.7789
suzanne_graham@mentor.com

 
Online Chat