Sign In
Forgot Password?
Sign In | | Create Account

Mentor Graphics Outlines Strategy for 3D-IC Design, Verification and Testing

WILSONVILLE, Ore., March 29, 2011 - Mentor Graphics Corporation (NASDAQ: MENT) today described its strategy for meeting the EDA requirements of designing, verifying, manufacturing and testing integrated circuit products using multi-die vertical stacking technology, popularly referred to as “3D-IC.” It also announced its 3D-IC testing solution employing multiple components of the Tessent® design-for-test product line for integrated multi-die hierarchical scan and built-in self-test (BIST) methodologies.

“3D-IC is generating a huge amount of interest and exploration because it offers an alternative to traditional scaling for achieving advances in performance, reduced power consumption, cost reduction, and increased functionality in a small package,” said Walden C. Rhines, CEO and chairman of Mentor Graphics. “We’re validating the use of our products for successful 3D-IC development with our leading customers who are actively working on products employing multiple die stacking approaches, including the use of interposers, or so-called ‘2.5D,’ and full 3D with through silicon vias (TSVs). Regardless of which approach a customer selects, customers will have a Mentor solution available to them.”

“Today, we’re describing our 3D-IC test solution, which addresses both 2.5 and full 3D test requirements,” said Joseph Sawicki, vice president and general manager of the design-to-silicon division at Mentor Graphics. “At the upcoming Design Automation Conference we will talk more about our multi-die design rule checking, layout versus schematic, and extraction solutions for 3D-IC, which will address the impact of TSVs on physical verification. And, in the coming months we will describe solutions for interposer and package routing as well as product roadmaps to meet the future needs of the market.”

Hierarchical Test for 3D-IC
The Tessent solution for 3D-IC test provides a combination of capabilities that work together to deliver the highest test quality while reducing development time and manufacturing test costs. The combination of the Tessent TestKompress® and Tessent LogicBIST logic test products create both highly compressed deterministic scan patterns, and on-chip generated random patterns that together ensure very high coverage while minimizing test time. This is critical since low defect rates at the “known good die” stage are critical to achieving acceptable package yield in 3D-IC production. Low test time becomes even more important for 3D because die stacking may require additional test stages for partial assemblies.

Another key requirement of 3D-IC is the ability to fully test the assembled multi-die structure, which presents challenges in test access and throughput. Successful testing depends on the ability to combine logic built-in self-test (LBIST), memory BIST, analog test and boundary scan test in an integrated fashion, and to distribute test commands and patterns across multiple die in a hierarchical manner. The Mentor® Tessent TestKompress, Tessent LogicBIST, Tessent MemoryBIST, Tessent BoundaryScan, Tessent PLLTest and Tessent SerdesTest products work together to provide a seamless infrastructure for testing 3D structures including processor cores, logic, memory and high-speed I/O. A key advantage of the Tessent solution is the ability to reuse die-level ATPG and BIST tests at the package level. The Tessent insertion technology enables the creation of a hierarchical DFT architecture that is based on the IEEE 1149.1 standard with 3D-related enhancements such as TSV-based “test elevators.” This test distribution and control architecture enables die-level patterns to be routed through multiple die after packaging. Scan patterns can target TSV interconnects by accessing scan chains on multiple die. In addition, die-targeted ATPG patterns can be retargeted to the package level with automatic pattern re-timing, allowing engineers to reuse patterns and reduce test development time.

The Tessent MemoryBIST product provides at-speed testing of stacked memory die with support for all popular DRAM protocols, and allows memory parameters (address size, waveforms) and test algorithms to be programmed post-silicon. This allows memory BIST controllers in a logic die to handle a variety of memory die stacked on top for different product variations. The product also supports at-speed testing of memory buses, which covers both bond wires and TSV interconnects. A shared-bus capability enables test of multiple memory die on the same interconnect.

About Mentor Graphics
Mentor Graphics Corporation (NASDAQ: MENT) is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world’s most successful electronic, semiconductor and systems companies. Established in 1981, the company reported revenues over the last 12 months of about $915 million. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com/.

(Mentor Graphics, Mentor, Tessent and TestKompress are registered trademarks of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.)

For more information, please contact:
Gene Forte
Mentor Graphics
503.685.1193
gene_forte@mentor.com

Sonia Harrison
Mentor Graphics
503.685.1165
sonia_harrison@mentor.com

 
Online Chat