Monday, June 02

9:00 AM - 10:00 AM  2 sessions

Suite B
  • Custom IC Design and AMS Simulation/Verification – Unparalleled Insight and Productivity
Presenter: Chris Cone, Product Marketing Manager, Mentor Graphics
Products: Pyxis, Analog FastSPICE (AFS) Platform, Eldo, ADit
AMS/Custom IC Design
Suite C
  • Get Your FPGA Out of the Lab and into Production
Presenter: Jim Kenney, Marketing Director, Mentor Graphics
Products: HDL Designer, Precision, Questa
Design & Functional Verification

10:00 AM - 10:30 AM  1 session

Booth 1113
  • A New Era in Functional Verification
Presenter: Harry Foster, Chief Verification Scientist, Mentor Graphics
Products: Questa
Verification Academy

10:00 AM - 11:00 AM  3 sessions

Suite B
  • Update on DFM and Fill for Advanced Nodes
Presenter: Jeff Wilson, DFM Product Marketing Manager, Mentor Graphics
Presenter: Joe Kwan, Foundries Program Manager, Mentor Graphics
Products: Calibre LFD, Calibre YieldEnhancer, Calibre YieldAnalyzer
IC Design & Test
Suite C
  • Full SoC Emulation from Device Drivers to Peripheral Interfaces
Presenter: Jim Kenney, Marketing Director, Mentor Graphics
Products: Veloce
Design & Functional Verification
Suite A
  • RealTime Designer & Olympus-SoC: Fastest Full Chip RTL Synthesis and Floorplanning
Presenter: Arvind Narayanan, Product Marketing Manager, Integrated Circuit Implementation Division, Mentor Graphics
Presenter: Shankar Vellanthurai, Senior Product Engineer, Mentor Graphics
Products: Olympus-SoC, Oasys RealTime Designer
IC Design & Test

11:00 AM - 11:30 AM  1 session

Booth 1113
  • Power exploration to RTL power convergence for advanced designs
Presenter: Anand Iyer, Product Marketing, Calypto
Products: Questa
Verification Academy

11:00 AM - 12:00 PM  3 sessions

Suite A
  • Parasitic Extraction to Meet the Challenge of Advanced Nodes
Presenter: Carey Robertson, Director of Product Marketing, LVS and Extraction, Mentor Graphics
Products: Calibre nmLVS, Calibre xACT
IC Design & Test
Suite B
  • Better Layout in Less Time: AMD’s Experience with Calibre RealTime at 20nm and Below
Presenter: Kalyan Chakravarthy, Member of Technical Staff, AMD
Presenter: Srinivas Velivala, Calibre TME, Mentor Graphics
Products: Calibre RealTime
IC Design & Test
Suite C
  • Questa: High-Performance Simulation, Emulation and much more
Presenter: Mark Olen, Product Marketing Manager, Mentor Graphics
Products: Veloce, Questa
Design & Functional Verification

12:00 PM - 12:15 PM  1 session

Booth 1801
  • Helping Ensuring Your FinFET Designs Ramp to Production As Fast as Possible with Calibre and Tessent
Presenter: Michael Buehler-Garcia, Senior Director of Marketing for Calibre Design Solutions, Mentor Graphics
Presenter: Steve Pateras, Product Marketing Director, Silicon Test Products, Mentor Graphics
Products: Calibre, Tessent
IC Design & Test

12:00 PM - 1:00 PM  1 session

Suite C
  • Customer Success using Olympus-SoC P&R: Ostendo Technologies
Products: Olympus-SoC
IC Design & Test

1:00 PM - 1:30 PM  2 sessions

Booth 1113
  • You Think You Have Good Stimulus: System-Level Distributed Metrics Analysis and Results
Presenter: Alan Hunter, ARM
Products: Questa
Verification Academy
Booth 1107
  • Calibre Signoff DRC in OpenAccess-enabled Design Environments
Presenter: Srinivas Velivala, Calibre TME, Mentor Graphics
Products: Calibre RealTime
IC Design & Test

1:00 PM - 2:00 PM  3 sessions

Suite A
  • PyxisOpen — Assisted Automation for the Toughest Custom IC Design Problems
Presenter: Tom Daspit, Product Marketing Manager, Mentor Graphics
Products: PyxisOpen
AMS/Custom IC Design
Suite B
  • Introduction to the Analog FastSPICE (AFS) Platform
Presenter: Mick Tegethoff, Product Marketing Manager, Mentor Graphics
Products: Analog FastSPICE (AFS) Platform
AMS/Custom IC Design
Suite C
  • Innovative Virtual Prototype Technologies for System and Application Bring-up
Presenter: Shabtay Matalon, Market Development Manager, Mentor Graphics
Products: Vista, CodeBench-Virtual Edition
Design & Functional Verification

2:00 PM - 2:30 PM  1 session

Booth 1113
  • UVM Transactions - Important Undocumented Details
Presenter: Cliff Cummings, President, Sunburst Design
Products: Questa
Verification Academy

2:00 PM - 2:40 PM  1 session

Booth 413
  • ESD Challenges at Advanced Nodes with Complex Design
Presenter: Matt Hogan, Product Marketing Manager, Calibre Design Solutions, Mentor Graphics
Presenter: Valerie Rachko, Marketing Director, Mentor Graphics
Products: Calibre PERC
IC Design & Test

2:00 PM - 3:00 PM  3 sessions

Suite A
  • Improving Circuit Reliability with Calibre PERC
Presenter: Matt Hogan, Product Marketing Manager, Calibre Design Solutions, Mentor Graphics
Products: Calibre PERC
IC Design & Test
Suite B
  • Test Solutions for High-Quality Automotive Devices
Presenter: Steve Pateras, Product Marketing Director, Silicon Test Products, Mentor Graphics
Products: Tessent
IC Design & Test
Suite C
  • How to Accelerate Verification with 5 Easy to Use Formal Apps
Presenter: Roger Sabbagh, Product Marketing Manager, Mentor Graphics
Products: Questa
Design & Functional Verification

2:30 PM - 2:45 PM  1 session

Booth 819
  • Ensuring Manufacturability at Advanced FinFET Process Nodes
Presenter: Michael Buehler-Garcia, Senior Director of Marketing for Calibre Design Solutions, Mentor Graphics
Products: Calibre
IC Design & Test

3:00 PM - 3:30 PM  1 session

Booth 1113
  • UVM: What’s New, What’s Next, and Why You Care
Presenter: Tom Fitzpatrick, Verification Technologist, Mentor Graphics
Products: Questa
Verification Academy

3:00 PM - 4:00 PM  2 sessions

Suite A
  • Mentor RTL to GDS Digital Implementation for Best PPA at Advanced Nodes
Presenter: Arvind Narayanan, Product Marketing Manager, Integrated Circuit Implementation Division, Mentor Graphics
Presenter: Shankar Vellanthurai, Senior Product Engineer, Mentor Graphics
Products: Olympus-SoC, Oasys RealTime Designer
IC Design & Test
Suite C
  • Visualizer: A Powerful Debug Environment for Complex SOCs
Presenter: Anissa Mawer, Verification Technology Manager, Mentor Graphics
Products: Veloce, Questa, Visualizer
Design & Functional Verification

4:00 PM - 4:30 PM  1 session

Booth 1113
  • Debugging Software in Emulation
Presenter: Jim Kenney, Marketing Director, Mentor Graphics
Products: Veloce
Verification Academy

4:00 PM - 5:00 PM  2 sessions

Booth 1733
  • Back to the Future: Is There Success without Moore's Law?
Panelist: Mark Redford, Vice President and General Manager, U.S. Operations and Advanced Process Technology Development, CSR
Moderator: Michael Buehler-Garcia, Senior Director of Marketing for Calibre Design Solutions, Mentor Graphics
Panelist: Risto Puhakka, President, VLSI Research
Panelist: Subramani Kenger, Vice President Advanced Technology Architecture, GLOBALFOUNDRIES
Panelist: Thomas Riener, Senior Vice President and General Manager, Full Service Foundry, ams
Products: Calibre
IC Design & Test
Suite C
  • 100% Verified But the Chip Failed – Why?
Presenter: Valerie Rachko, Marketing Director, Mentor Graphics
Products: ReqTracer, HDL Designer
Design & Functional Verification

Tuesday, June 03

9:00 AM - 9:30 AM  1 session

Booth 1113
  • How off-the-shelf IP can cut time spent on PCIe verification in half
Presenter: Romain Tourneau, PLDA
Products: Questa
Verification Academy

9:00 AM - 10:00 AM  2 sessions

Suite B
  • Custom IC Design and AMS Simulation/Verification – Unparalleled Insight and Productivity
Presenter: Chris Cone, Product Marketing Manager, Mentor Graphics
Products: Pyxis, Analog FastSPICE (AFS) Platform, Eldo, ADit
AMS/Custom IC Design
Suite C
  • Get Your FPGA Out of the Lab and into Production
Presenter: Jim Kenney, Marketing Director, Mentor Graphics
Products: HDL Designer, Precision, Questa
Design & Functional Verification

10:00 AM - 10:30 AM  1 session

Booth 1113
  • A New Era in Functional Verification
Presenter: Harry Foster, Chief Verification Scientist, Mentor Graphics
Products: Questa
Verification Academy

10:00 AM - 11:00 AM  3 sessions

Suite A
  • Mentor RTL to GDS Digital Implementation for Best PPA at Advanced Nodes
Presenter: Arvind Narayanan, Product Marketing Manager, Integrated Circuit Implementation Division, Mentor Graphics
Presenter: Shankar Vellanthurai, Senior Product Engineer, Mentor Graphics
Products: Olympus-SoC, Oasys RealTime Designer
IC Design & Test
Suite B
  • Update on DFM and Fill for Advanced Nodes
Presenter: Jeff Wilson, DFM Product Marketing Manager, Mentor Graphics
Presenter: Joe Kwan, Foundries Program Manager, Mentor Graphics
Products: Calibre LFD, Calibre YieldEnhancer, Calibre YieldAnalyzer
IC Design & Test
Suite C
  • Full SoC Emulation from Device Drivers to Peripheral Interfaces
Presenter: Jim Kenney, Marketing Director, Mentor Graphics
Products: Veloce
Design & Functional Verification

10:30 AM - 12:00 PM  2 sessions

Room 303
  • On Timing Closure: Buffer Insertion for Hold-Violation Removal F
Presenter: Ivailo Nedelchev, Chief Technologist, Mentor Graphics
Presenter: Sarvesh Bhardwaj, Lead Engineer, Mentor Graphics
Presenter: Vidyamani Parkhe, IC Architect, Mentor Graphics
Products: Calibre
IC Design & Test
Room 303
  • On Using Implied Values in EDT-Based Test Compression F
Presenter: Grzegorz Mrugalski, SW Development Manager, Mentor Graphics
Presenter: Janusz Rajski, Development Engineer Director, Mentor Graphics
Presenter: Nilanjan Mukherjee, Development Engineer Director, Mentor Graphics
Products: Calibre
IC Design & Test

11:00 AM - 11:15 AM  1 session

Booth 1801
  • Designing “Cool” ASIC and SoC Designs with PPA Optimized  Memory IPs in the TSMC Environment
Presenter: Farzad Zarrinfar, Director, Mentor Graphics
Products: Novelics
IC Design & Test

11:00 AM - 11:30 AM  1 session

Booth 1113
  • Verification and Debug: Old School Meets New School
Presenter: Rich Edelman, Verification Architect, Mentor Graphics
Products: Questa
Verification Academy

11:00 AM - 11:45 AM  1 session

Booth 313
  • Fireside Chat: Automotive Engineers Love Design Automation
Presenter: Walden Rhines, Chairman and Chief Executive Officer, Mentor Graphics
Products: Automotive
Automotive

11:00 AM - 12:00 PM  3 sessions

Suite B
  • Samsung Ecosystem Collaboration with Mentor for DFM at 14nm and Below
Presenter: Jean-Marie Brunet, Product Marketing Director for Design for Manufacturing (DFM) and Place & Route Integration, Mentor Graphics
Presenter: Kuang-Kuo Lin, Director of Foundry Design Enablement at America Headquarters Device Solutions, Samsung Semiconductor
Products: Calibre LFD, Calibre YieldEnhancer, Calibre YieldAnalyzer
IC Design & Test
Suite A
  • Calibre Advanced Physical Verification: Learn What’s Coming Your Way at 16/14nm and 10nm and How Calibre is Already Prepared
Presenter: Michael White, Director of Product Marketing, Calibre Physical Verification Products, Mentor Graphics
Products: Calibre nmDRC
IC Design & Test
Suite C
  • Questa: High-Performance Simulation, Emulation and much more
Presenter: Mark Olen, Product Marketing Manager, Mentor Graphics
Products: Veloce, Questa
Design & Functional Verification

12:00 PM - 1:00 PM  1 session

Suite C
  • Customer Success using Olympus-SoC P&R: ST Microelectronics
Products: Olympus-SoC
IC Design & Test

1:00 PM - 1:30 PM  1 session

Booth 1113
  • AMBA®CHI and the Mentor Enterprise Verification Platform
Presenter: William Orme, Strategic Marketing Manager, Systems & Software Group, ARM
Products: Questa
Verification Academy

1:00 PM - 2:00 PM  3 sessions

Suite A
  • Not Jumping to 16/14nm Tomorrow? Extend the Lifetime and Get the Most Out of Established Nodes with Advanced Calibre
Presenter: John Ferguson, Director of Marketing, Calibre DRC Applications, Mentor Graphics
Products: Calibre nmDRC
IC Design & Test
Suite C
  • Innovative Virtual Prototype Technologies for System and Application Bring-up
Presenter: Shabtay Matalon, Market Development Manager, Mentor Graphics
Products: Vista, CodeBench-Virtual Edition
Design & Functional Verification
Suite B
  • 2-5X Design Productivity Improvement in 14FDSOI layout designs: ST’s experiences with Calibre RealTime
Presenter: Srinivas Velivala, Calibre TME, Mentor Graphics
Products: Calibre RealTime
IC Design & Test

1:30 PM - 3:00 PM  2 sessions

Room 310
  • Applying EDA Techniques to Analysis and Optimization to In-vehicle Distributed Systems F
Presenter: Serge Leef, VP New Ventures, GM System-Level Engineering Division, Mentor Graphics
Products: Automotive
Automotive
Room 300
  • Fast and Accurate Full-chip Extraction and Optimization of TSV-to-Wire Coupling F
Presenter: Dusan Petranovic, Technical Marketing Engineer, Mentor Graphics
Products: Calibre
IC Design & Test

2:00 PM - 2:40 PM  1 session

Booth 413
  • Successful Application of Calibre LFD at SMIC
Presenter: Joe Kwan, Foundries Program Manager, Mentor Graphics
Presenter: Tom Daspit, Product Marketing Manager, Mentor Graphics
Products: Calibre LFD
IC Design & Test

2:00 PM - 3:00 PM  3 sessions

Suite B
  • Better Layout in Less Time: AMD’s Experience with Calibre RealTime at 20nm and Below
Presenter: Kalyan Chakravarthy, Member of Technical Staff, AMD
Presenter: Srinivas Velivala, Calibre TME, Mentor Graphics
Products: Calibre RealTime
IC Design & Test
Suite A
  • The Challenges of Power Grid Design in Advanced ICs
Presenter: Christen Decoin, Product Marketing Manager for New and Emerging Markets, Mentor Graphics
Products: Calibre
IC Design & Test
Suite C
  • How to Accelerate Verification with 5 Easy to Use Formal Apps
Presenter: Roger Sabbagh, Product Marketing Manager, Mentor Graphics
Products: Questa
Design & Functional Verification

2:30 PM - 3:00 PM  1 session

Booth 1113
  • Achieving Broad & Flexible Debug Visibility if FPGA Prototypes
Presenter: Steve Bailey, Director of Emerging Technologies, Mentor Graphics
Products: Questa
Verification Academy

3:00 PM - 3:30 PM  1 session

Booth 1113
  • UVM: What’s New, What’s Next, and Why You Care
Presenter: Tom Fitzpatrick, Verification Technologist, Mentor Graphics
Products: Questa
Verification Academy

3:00 PM - 4:00 PM  3 sessions

Suite B
  • Tessent Support of ARM Cores and Memories_x000D_
Presenter: Steve Pateras, Product Marketing Director, Silicon Test Products, Mentor Graphics
Products: Tessent
IC Design & Test
Suite C
  • Visualizer: A Powerful Debug Environment for Complex SOCs
Presenter: Anissa Mawer, Verification Technology Manager, Mentor Graphics
Products: Veloce, Questa, Visualizer
Design & Functional Verification
Suite A
  • RealTime Designer & Olympus-SoC: Fastest Full Chip RTL Synthesis and Floorplanning
Presenter: Arvind Narayanan, Product Marketing Manager, Integrated Circuit Implementation Division, Mentor Graphics
Presenter: Shankar Vellanthurai, Senior Product Engineer, Mentor Graphics
Products: Olympus-SoC, Oasys RealTime Designer
IC Design & Test

3:15 PM - 3:30 PM  1 session

Booth 1801
  • Mentor RTL to GDS Digital Implementation for best PPA at Advanced Nodes 
Presenter: Arvind Narayanan, Product Marketing Manager, Integrated Circuit Implementation Division, Mentor Graphics
Products: Olympus-SoC, Oasys RealTime Designer
IC Design & Test

3:30 PM - 3:45 PM  1 session

Booth 819
  • Mentor Graphics Formal Verification Meets the Need for Complex Designs
Presenter: Roger Sabbagh, Product Marketing Manager, Mentor Graphics
Products: Questa
Design & Functional Verification

3:35 PM - 3:55 PM  1 session

Booth 2007
  • Vista Virtual Prototyping for HW/SW Debug and Analysis
Presenter: Shabtay Matalon, Market Development Manager, Mentor Graphics
Products: Vista, CodeBench-Virtual Edition
Design & Functional Verification

4:00 PM - 4:30 PM  1 session

Booth 1113
  • Maximize Verification Reuse with Portable Stimulus
Presenter: Matthew Balance, Verification Technologist, Mentor Graphics
Products: Questa
Verification Academy

4:00 PM - 5:00 PM  4 sessions

Booth 1733
  • What will Moore's Law Cost Us at 10nm?
Panelist: Jim Hogan, Founding Partner, Vista Ventures
Moderator: Joe Sawicki, Vice President and General Manager Design to Silicon Division, Mentor Graphics
Panelist: Riko Radojcic, Sr. Director, Design-for-Technology Initiatives, Qualcomm
Panelist: Suk Lee, Design Infrastructure Marketing Division Design Technology, TSMC
Products: Calibre
IC Design & Test
Suite A
  • PyxisOpen — Assisted Automation for the Toughest Custom IC Design Problems
Presenter: Tom Daspit, Product Marketing Manager, Mentor Graphics
Products: PyxisOpen
AMS/Custom IC Design
Suite B
  • Introduction to the Analog FastSPICE (AFS) Platform
Presenter: Mick Tegethoff, Product Marketing Manager, Mentor Graphics
Products: Analog FastSPICE (AFS) Platform
AMS/Custom IC Design
Suite C
  • 100% Verified But the Chip Failed – Why?
Presenter: Valerie Rachko, Marketing Director, Mentor Graphics
Products: ReqTracer, HDL Designer
Design & Functional Verification

4:00 PM - 5:30 PM  1 session

Room 306
  • End-User Applications - Tests for Nothing and Verification for Free F
Presenter: Harry Foster, Chief Verification Scientist, Mentor Graphics
Products: Questa
Design & Functional Verification

4:00 PM - 6:00 PM  1 session

Room 105
  • Power Aware Clock Domain Crossing Verification F
Presenter: Roger Sabbagh, Product Marketing Manager, Mentor Graphics
Presenter: Saumitra Goel, Lead Consultant Staff, Mentor Graphics
Products: Questa
Design & Functional Verification

Wednesday, June 04

9:00 AM - 10:00 AM  2 sessions

Suite B
  • Custom IC Design and AMS Simulation/Verification – Unparalleled Insight and Productivity
Presenter: Chris Cone, Product Marketing Manager, Mentor Graphics
Products: Pyxis, Analog FastSPICE (AFS) Platform, Eldo, ADit
AMS/Custom IC Design
Suite C
  • Get Your FPGA Out of the Lab and into Production
Presenter: Jim Kenney, Marketing Director, Mentor Graphics
Products: HDL Designer, Precision, Questa
Design & Functional Verification

10:00 AM - 10:30 AM  1 session

Booth 1113
  • A New Era in Functional Verification
Presenter: Harry Foster, Chief Verification Scientist, Mentor Graphics
Products: Questa
Verification Academy

10:00 AM - 11:00 AM  3 sessions

Suite B
  • Update on DFM and Fill for Advanced Nodes
Presenter: Jeff Wilson, DFM Product Marketing Manager, Mentor Graphics
Presenter: Joe Kwan, Foundries Program Manager, Mentor Graphics
Products: Calibre LFD, Calibre YieldEnhancer, Calibre YieldAnalyzer
IC Design & Test
Suite C
  • Full SoC Emulation from Device Drivers to Peripheral Interfaces
Presenter: Jim Kenney, Marketing Director, Mentor Graphics
Products: Veloce
Design & Functional Verification
Suite A
  • RealTime Designer & Olympus-SoC: Fastest Full Chip RTL Synthesis and Floorplanning
Presenter: Arvind Narayanan, Product Marketing Manager, Integrated Circuit Implementation Division, Mentor Graphics
Presenter: Shankar Vellanthurai, Senior Product Engineer, Mentor Graphics
Products: Olympus-SoC, Oasys RealTime Designer
IC Design & Test

11:00 AM - 11:30 AM  1 session

Booth 1113
  • Formal Verification Signoff Methodology
Presenter: Vigyan Singhal, President and CEO, Oski
Products: Questa
Verification Academy

11:00 AM - 12:00 PM  3 sessions

Suite A
  • Parasitic Extraction to Meet the Challenge of Advanced Nodes
Presenter: Carey Robertson, Director of Product Marketing, LVS and Extraction, Mentor Graphics
Products: Calibre nmLVS, Calibre xACT
IC Design & Test
Suite B
  • Improving Circuit Reliability with Calibre PERC
Presenter: Matt Hogan, Product Marketing Manager, Calibre Design Solutions, Mentor Graphics
Products: Calibre PERC
IC Design & Test
Suite C
  • Questa: High-Performance Simulation, Emulation and much more
Presenter: Mark Olen, Product Marketing Manager, Mentor Graphics
Products: Veloce, Questa
Design & Functional Verification

11:30 AM - 11:45 AM  1 session

Booth 819
  • Ensuring Manufacturability at Advanced FinFET Process Nodes
Presenter: Michael Buehler-Garcia, Senior Director of Marketing for Calibre Design Solutions, Mentor Graphics
Products: Calibre
IC Design & Test

1:00 PM - 1:30 PM  1 session

Booth 1113
  • Formal Apps In-Depth: Connectivity and Register Verification
Presenter: Mark Eslinger, Mentor Graphics
Products: Questa
Verification Academy

1:00 PM - 2:00 PM  3 sessions

Suite A
  • PyxisOpen — Assisted Automation for the Toughest Custom IC Design Problems
Presenter: Tom Daspit, Product Marketing Manager, Mentor Graphics
Products: PyxisOpen
AMS/Custom IC Design
Suite B
  • Introduction to the Analog FastSPICE (AFS) Platform
Presenter: Mick Tegethoff, Product Marketing Manager, Mentor Graphics
Products: Analog FastSPICE (AFS) Platform
AMS/Custom IC Design
Suite C
  • Innovative Virtual Prototype Technologies for System and Application Bring-up
Presenter: Shabtay Matalon, Market Development Manager, Mentor Graphics
Products: Vista, CodeBench-Virtual Edition
Design & Functional Verification

1:15 PM - 1:30 PM  1 session

Booth 1801
  • Partnering to Advance Nanometer-Scale Circuit Verification – Mentor Graphics Analog FastSPICE Platform and TSMC
Presenter: Mick Tegethoff, Product Marketing Manager, Mentor Graphics
Products: Questa
IC Design & Test

1:30 PM - 2:30 PM  1 session

Room 306
  • FinFET and IC Design: Mountain or Mole Hill? F
Presenter: Jean-Marie Brunet, Product Marketing Director for Design for Manufacturing (DFM) and Place & Route Integration, Mentor Graphics
Products: Calibre
IC Design & Test

1:30 PM - 3:00 PM  1 session

Room 310
  • Connected Engineering for Automtive EE Design F
Presenter: Andrew Patterson, Director, Automotive, Mentor Graphics
Products: Automotive
Automotive

2:00 PM - 3:00 PM  2 sessions

Suite A
  • The Challenges of Power Grid Design in Advanced ICs
Presenter: Marko Chew, Technical Marketing Engineer, Mentor Graphics
Products: Calibre
IC Design & Test
Suite C
  • How to Accelerate Verification with 5 Easy to Use Formal Apps
Presenter: Roger Sabbagh, Product Marketing Manager, Mentor Graphics
Products: Questa
Design & Functional Verification

3:00 PM - 3:30 PM  1 session

Booth 1113
  • Instant Formal Expert
Presenter: Jeremy Levitt, Engineering Manager, Mentor Graphics
Products: Questa
Verification Academy

3:00 PM - 4:00 PM  2 sessions

Suite A
  • Mentor RTL to GDS Digital Implementation for Best PPA at Advanced Nodes
Presenter: Arvind Narayanan, Product Marketing Manager, Integrated Circuit Implementation Division, Mentor Graphics
Presenter: Shankar Vellanthurai, Senior Product Engineer, Mentor Graphics
Products: Olympus-SoC, Oasys RealTime Designer
IC Design & Test
Suite C
  • Visualizer: A Powerful Debug Environment for Complex SOCs
Presenter: Anissa Mawer, Verification Technology Manager, Mentor Graphics
Products: Veloce, Questa, Visualizer
Design & Functional Verification

4:00 PM - 4:30 PM  1 session

Booth 1113
  • UVM: What’s New, What’s Next, and Why You Care
Presenter: Tom Fitzpatrick, Verification Technologist, Mentor Graphics
Products: Questa
Verification Academy

4:00 PM - 5:00 PM  2 sessions

Booth 1733
  • Tackling FinFET Analog Mixed Signal and Memory Verification
Presenter: Ravi Subramanian, General Manager, AMS, Mentor Graphics
Products: Analog Mixed Signal
AMS/Custom IC Design
Suite C
  • 100% Verified But the Chip Failed – Why?
Presenter: Valerie Rachko, Marketing Director, Mentor Graphics
Products: ReqTracer, HDL Designer
Design & Functional Verification

4:00 PM - 5:30 PM  1 session

Room 306
  • Is Model-Driven Development the Answer to Design Complexity? F
Presenter: Serge Leef, VP New Ventures, GM System-Level Engineering Division, Mentor Graphics
Products: Embedded Software
Embedded Software

6:00 PM - 7:00 PM  7 sessions

Esplanade Foyer 
  • Stress Assessment for Device Performance in 3D IC F
Presenter: Armen Kteyan, Lead Engineer, Mentor Graphics
Presenter: Gevorg Gevorgyan, Engineer, Mentor Graphics
Presenter: Henrik Hovsepyan, R&D Manager, Mentor Graphics
Presenter: Jun-Ho Choy, Engineer, Mentor Graphics
Presenter: Valeriy Sukharev, Principle Engineer, Mentor Graphics
Products: Calibre
IC Design & Test
Esplanade Foyer 
  • Geometric Pattern Match Using Edge Driven Dissected Rectangles and Vector Space F
Presenter: Robert Todd, Chief Engineering Scientist, Mentor Graphics
Products: Calibre
IC Design & Test
Esplanade Foyer 
  • New Trends in TSV: SWCNT-Based TSV and Air-Gap Based Coaxial TSV F
Presenter: Khaled Mohamed, Technical Engineer, Mentor Graphics
Products: Calibre
IC Design & Test
Esplanade Foyer 
  • Physical Verification of Hierarchical Analog Design Constraints for Automotive ICs F
Presenter: Dina Medhat, Senior Technical Marketing Engineer, Mentor Graphics
Presenter: Hartmut Marquardt, Senior Application Engineer, Mentor Graphics
Products: Calibre
IC Design & Test
Esplanade Foyer 
  • Advanced Layout Reliability Verification Methodology For Mixed Signal and Multi-Power Domain Designs F
Presenter: Jen Chen, Senior Application Engineer, Mentor Graphics
Presenter: Sridhar Srinivasan, R&D Staff Engineer, Mentor Graphics
Presenter: Srinivas Velivala, Calibre TME, Mentor Graphics
Products: Calibre
IC Design & Test
Esplanade Foyer 
  • Modeling Proximity-Induced Variability in Standard Cells for Optimized Timing Performance F
Presenter: Mohamed Dessouky, Engineer, Mentor Graphics
Presenter: Mohamed Said, Senior IC Design Consultant, Mentor Graphics
Products: Calibre
IC Design & Test
Esplanade Foyer 
  • A Novel Dimensional Analysis Method for TSV Modeling and Analysis in Three Dimensional Integrated Circuits F
Presenter: Khaled Mohamed, Technical Engineer, Mentor Graphics
Products: Calibre
IC Design & Test