Sign In
Forgot Password?
Sign In | | Create Account

PCB Manufacturing, Assembly & Test Blog

Posts tagged with 'data preparation'

30 Sep, 2013

Mark Laing Hi there The first in a series of three webinars is now available on Mentor.com where David Wiens and myself promote Best Practices for PCB New Product Introduction. We discuss six steps that should be used to improve the speed of introducing new products in to manufacturing for both PCB designers and process engineers alike. One of the most beneficial areas for PCB Designers is to take control of the … Read More

data preparation, NPI, documentation, New Product Introduction

5 Sep, 2013

Mark Laing Hi there On September 23rd and 24th in Frankfurt, Germany, we will host a day and half seminar on the Valor MSS Process Preparation product line. I have talked alot about this over the past couple of years on my blog and enjoyed meeting a lot of you at last years very successful event. I will also be there this year so I am looking forward to meeting you again as well as meeting some new faces who for … Read More

vPlan, Frankfurt, data preparation, seminar, process preparation

1 Aug, 2013

Mark Laing Hi there We have released Update 3 for Valor MSS Process Preparation users. This addresses a number of defects that were found recently but also adds new capability to support a MS SQL Server database in addition to the Oracle database that has been supported since the product was first released. We have also made significant improvements to support the SRFF format for Cyberoptics AOI machines due to … Read More

programming, Assembleon, process, Cyberoptics, data preparation

28 Jun, 2013

Mark Laing Hi there Last year we held a very successful Process Preparation seminar in Switzerland for our central European users. This year the seminar will be held in Frankfurt, Germany on September 23-24. The focus will be on the capability provided by Valor MSS Process Preparation so areas such as Data Preparation, SMT Programming, Test Programming, Inspection Programming, Assembly Documentation and Stencil … Read More

programming, data preparation, process, vPlan, documentation

18 Jun, 2013

Mark Laing Hi there I have had many conversations with manufacturing people over the years regarding the various files that are created from design that are provided to them for the purposes of assembly and test. It is not unusual to hear about a file set consisting of Gerbers, Drill, IPC 356 Netlist, Centroid, BOM, Intelligent layout, various documentation files and other machine specific format files that continue … Read More

process, Automated Optical Inspection, mixed vendor, ODB++, documentation, BOM, Flying Probe, ICT, Automated X-Ray Inspection, bill of materials, Design For Test, data preparation, programming, vPlan

11 Jun, 2013

Mark Laing Hi there Boundary Scan has been available for well over 15 years now and it has continued to evolve over that time as the initial IEEE standard 1149 has been updated to cover more than just digital devices. Although for most printed circuit designs full testing through 4 or 5 connections is not possible a significant number of designs have some number of components on them that support the Boundary … Read More

ICT, Flying Probe, testability, vPlan, boundary scan, process, Design For Test, programming, data preparation

31 May, 2013

Juki ISS Interface, now improved

Posted by Mark Laing

Mark Laing Hi there A couple of versions ago Valor MSS released a new interface to the Juki IS software. Here we created the best solution for Juki machines through the new ISS XML file that Juki developed. The reason that this solution is the best on the market is because we can use our unique auto-generation capability to create Juki specific part data from existing MSS vShapes, VPL content or by reading all … Read More

Enhancement, data preparation, Juki, approved vendor list, programming, vPlan, BOM, process, AVL, bill of materials

14 May, 2013

Mark Laing Hi there SMT vendors are commonly asked by prospective customers about their existing pick and place programs and what happens with them if they purchase another type of equipment. The customer is usually told that there is nothing that can be done with those programs and hence they need to maintain those in the old system until they migrate them to the new machines. However in Valor MSS Process Preparation … Read More

Sony, Assembleon, programming, Sequence, Siemens, approved vendor list, mixed vendor, Fuji, Panasonic, Hitachi, process, data preparation, Juki, iPulse, Universal, vPlan, Yamaha

8 May, 2013

Mark Laing Hi there This week I would like to ask for input on assembly variants. For the context of this post I would like to state that an assembly variant is one where the base bare PCB is common to all assembly variants and that the variation is through the presence and absence of parts including part substitution of functionally different parts. Therefore using an Approved Vendor List (AVL) to substitute … Read More

data preparation, approved vendor list, bill of materials, process, BOM, assembly variant, AVL, variant

24 Apr, 2013

Mark Laing Hi there This may seem a strange topic for a Process Engineering Blog but bear with me on this. Over the past few years, car manufacturers seem to be in a race to develop the cars with the highest number of gear ratios in them. Currently cars on the market have automatic gearboxes with 8 forward ratios. Manual gearboxes exist with 7 forward gears now.  I have also heard about possible future gearboxes … Read More

programming, AOI, data preparation, vPlan, bill of materials, BOM

2 Apr, 2013

Mark Laing Hi there One of the areas that we constantly look to enhance with each release is our support for the machines that are in use with our customers. Although we use the Mentor Ideas site as a opportunity to derive feedback from yourselves, I also wanted to take this chance to ask you to let me know which machines you still need us to support either because they are new to the market or needed to address … Read More

AOI, Enhancement, Flying Probe, ICT, AXI, data preparation, bill of materials, Design For Test, Automated Optical Inspection, Automated X-Ray Inspection, documentation, boundary scan, BOM, process, vPlan, SPI, THT, Solder Paste Inspection, programming

26 Mar, 2013

Mark Laing Hi there As the next installment of the new capability in Valor MSS 11.3, I shall today talk about the improvements we have made in the Stencil Design module of the product. We added a number of new standard apertures to the Stencil Design with this release. These were specifically to address commonly created stencil openings that were previously challenging to create quickly. Now they are automatically … Read More

solder paste, stencil, aperture, vPlan, data preparation, BOM

5 Mar, 2013

Mark Laing Hi there We recently had a successful trade show at Apex 2013 in San Diego. During the event I was interviewed with iConnect PCB007′s Andy Shaughnessy. We discussed the main themes that we were promoting on the booth in the area of Process Preparation, namely being able to use a single solution for all areas of PCB manufacturing data preparation as well as simplying the many types of part library … Read More

IPC, vPlan, AOI, documentation, Flying Probe, ICT, AVL, data preparation, AXI, Design For Test, Automated Optical Inspection, Automated X-Ray Inspection, BOM, bill of materials, testability, SPI, Solder Paste Inspection, programming, process

26 Feb, 2013

Mark Laing Hi there I recently discussed the new capability in Valor MSS Process Preparation 11.3. I mentioned that I would go in to more detail on some of the areas that are part of this version and I will cover the new Test Probe Placement capability today. We have added an all new Test Probe Placement Session in 11.3 that performs the physical test probe placement analysis natively within the application. This … Read More

AOI, Flying Probe, ICT, AXI, data preparation, bill of materials, Design For Test, Automated Optical Inspection, Automated X-Ray Inspection, boundary scan, BOM, process, vPlan, testability, VPL

21 Feb, 2013

Mark Laing Hi there The Valor team are here in San Diego at the IPC Apex Trade Show. We’ve had a great couple of days, meeting our customers, plenty of new ones as well as meeting with some of the other vendors at the show. Our theater presentations have been well received, bringing people in to the booth and then stopping afterwards, asking questions and looking for more information. If you are at the show … Read More

Enhancement, documentation, programming, Solder Paste Inspection, AOI, Design For Test, SPI, apex, stencil, testability, Automated Optical Inspection, VPL, BOM, Automated X-Ray Inspection, vPlan, boundary scan, approved vendor list, data preparation, AXI, AVL, bill of materials, Flying Probe, Planning, mixed vendor, OIB, IPC, ICT

Tags

Archives

 
Online Chat