EDGE MAJIC JTAG
The EDGE MAJIC architecture is designed to simplify target board bring-up and support by independent layering of debugger software interface APIs, internal firmware tailored to individual cores, and pre-configured target support files for each reference design, independent from the tool choices higher up the chain. Several standard JTAG cables complete the target connection, so one probe can easily support multiple processors, architectures, and software environments.
Benefits
Multiple Debugger API Support
EDGE MAJIC probes include multiple shared libraries and executables. It also supports industry standard debugger APIs, enabling one JTAG Probe to support multiple software environments.
Setup Wizard, Templates & Target Initialization files
With EDGE MAJIC probes, you get out-of-the-box setup for reference designs and ease of transition to OEM board designs.
Comprehensive cache and MMU/MPU support
This is defined for each core type, including all write-through and/or write-back cache mode options, memory management or protection modes, and DMA, where available.
Pre-Configured Target and Sample Files
Builds early confidence in processor, memory system and target controls, and provide templates for transition to OEM targets
Multiple price point bundles:
- MAJIC-LT - Supports EDGE Developer Suite*, EDB* and GDB only, 10 MHz JTAG clock and 3.3V targets.
- MAJIC-LX - Adds programmable JTAG clock 1 to 40 MHz, Auto-Power-Sense 1.2V to 3.3V, and includes all OpenDebug API support.
- MAJIC-MT - All MAJIC-LX features, plus multi-core debug sessions and Intel XScale trace upload
Processors
ARM and MIPS standard core and architectural licensee core support - MAJIC probes support 30 standard cores, 46 cores from architectural licensees and 207 reference board designs, with straight-forward adaptation to new SOC designs based on those cores.
MAJIC Solutions
Layered Target Interface Software
- Multiple debugger APIs
- Multiple CPU Architectures supported
- MAJIC firmware support for each core type
- Target board and core base start-up files
- Target support initialization/control files
- Standard memory test pattern options
MAJIC Probe Features
- Non-intrusive JTAG connection
- Non-intrusive connect mode
- Interactive debug mode
- Hardware breakpoint support
- Unlimited software breakpoints
- Programmable JTAG clock
- Download speeds to >400KB/s
- Supports RT Adaptive clock mode for ARM
- Preconfigured and customizable template startup files
- Comprehensive memory tests supports
- NOR Flash programming utilities
- Scripts control target-specific functions
- HW and SW QuickStart guide
- Ethernet and serial cables
- Power supply brick with international power cord
- MONICE command line debugger
- MONICE scripting language (for watchdog timers, on-stop, at-stop or on-go controls)
- NOR Flash programming utilities
- Standard JTAG cables
MAJIC Standard JTAG Cables
- ARM
- CK-ARM14 14-pin
- CK-ARM20 20-pin
- CK-ARM38/1 Mictor-38
- CK-FPJ12 12-pin small
- CK-TX14 TI 14-pin
- MIPS
- CK-EJ12 12-pin
- CK-EJ20 20-pin
- CK-EJ52 52-pin
- CK-J10 10-pin
- CK-J12 12-pin
- CK-MIPS14 14-pin
MAJIC Solutions for...
ARM® Core/Processor
ARM® Core/Processor Support
- ARM cores: 7TDMI, 7TDMI-S, 7EJ-S, 720T, 9TDMI, 9E-S, 920T, 922T, 926EJ-S, 940T, 946E-S, 966E-S, 968E-1136JF-S, 1156T2, 1176JZF-S, MPcore
- Altera: EXPA Series
- Atmel: AT7x, AT91x
- Cirrus: EP7x, EP9x
- Conexant: CN/CXxxxxx
- Faraday: FA526 core
- Freescale: i.MX family
- GlobespanVirata: Helium 100, 210-80, 500
- Marvell: Feroceon, PXA3xx
- NetSilicon: NET+ARM, NS7520, NS9360, NS9750
- Oki Semi: ML67xxx
- Qualcomm: MSMxxxx
- Samsung: S3xxxxx
- Sharp: LH7xxxx
- ST Micro.: ARM7/9 SOCs, Nomadik
- Texas Inst.: ARM7 in Telogy DSPs ARM7/9 in OMAP family
- Winbond: W90N740
Intel XScale® Processor
Intel XScale® Processor Support
- Intel® Storage Components: OP310, IOP321, IOP33x, 80200, 80219, 80321, 8033x
- Intel® Control Plane Processor: IXC1100
- Intel® eXchange Architecture: IXP42x, IXP46x, IXP2350, 2400, IXP2800, 2850
- Marvell XScale processors: PXA25x, 26x, 27x and PXA3xx
MIPS® Core/Processor
MIPS® Core/Processor Support
- MIPS core IP: cnMIPS32, cnMIPS64, MIPS32, MIPS64, 4Kc, m, p, 4KEc, m, p, 5Kc/f, 24Kc/f, 24KE, Architectural licensees
- ATI Technologies: Xilleon 22x
- Broadcom: BCM11xx, BCM21xx, BCM33xx, BCM43xx, BCM47xx, BCM53xx, BCM58xx, BCM63xx, BCM65xx, BCM70xx, lBCM71xx, BCM73xx, BCM74xx
- Cavium Networks: CN2xx Nitrox Soho, CN3xxx OCTEON
- IDT: 79RC323xx, 79RC324xx
- Ikanos: AD6xxx
- Lexra: LX4/5xxx core IP
- LSI Logic: EZ4102/3
- Micronas: MDE95xx, VGC
- Micronas USA: Cypher 7108, DeCypher 8100
- PMC-Sierra: MSPxxxx
- Sigma Designs: SMP86xx
- Texas Inst.: TNETC/D/V-xxxx