Mentor Graphics CEO to Keynote SBC 2005
WILSONVILLE, Ore., May 6, 2005 - Mentor Graphics Corporation (NASDAQ: MENT) today announced that Walden C. Rhines, the company's chairman and CEO, will keynote the Semiconductor Strategic Business Conference (SBC) 2005 on May 10 at The Resort at the Mountain in Welches, Oregon. Rhines will discuss how design-for-manufacturing (DFM) is fundamentally changing the design/manufacturing partnership to enable faster yield time in the semiconductor industry, as nanometer designs enter the mainstream.
What: Mentor Graphics keynote by Walden C. Rhines, Chairman and CEO, Mentor Graphics Corporation, at SBC.
Topic: Design-for-Manufacturing
When: Tuesday, May 10, 2005, 8:00 - 8:45 a.m. PST
Where: The Resort at the Mountain, 68010 East Fairway Ave., Welches, OR 97067, (503) 622-3101
Website: http://wps2a.semi.org/wps/portal/_pagr/114/_pa.114/
About Mentor Graphics
Mentor Graphics Corporation (Nasdaq: MENT) is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world's most successful electronics and semiconductor companies. Established in 1981, the company reported revenues over the last 12 months of over $700 million and employs approximately 3,850 people worldwide. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777; Silicon Valley headquarters are located at 1001 Ridder Park Drive, San Jose, California 95131-2314. World Wide Web site: http://www.mentor.com/.
Mentor Graphics is a registered trademark of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.
For more information, please contact:
Suzanne Graham
Mentor Graphics
503.685.7789
suzanne_graham@mentor.com
Barbara Rizzatti
Mentor Graphics
503.685.0443
barbara_rizzatti@mentor.com
Scalable Verification Press Releases
- Mentor Graphics and JEOL to Develop Advanced IC Mask Writing Solutions (Nov 23, 2011)
- Mentor Graphics and GLOBALFOUNDRIES Extend RET and OPC Collaboration to 28nm (Mar 1, 2011)
- New Shanghai HuaLi Foundry Chooses the Mentor Graphics Calibre RET Solution for 65/45nm Development and Production (Feb 28, 2011)
- Mentor Graphics Design-to-Silicon Solutions Implemented as Part of Samsung Electronics’ New 32nm High-K Metal Gate Offering (Jun 11, 2010)
- Freescale Semiconductor Collaborates with Mentor Graphics on Tessent Silicon Test, Yield Analysis, Calibre Physical Verification and DFM (Jan 11, 2010)
- GLOBALFOUNDRIES Selects Mentor Graphics Calibre Platform for Computational Lithography and DFM Enablement (Oct 16, 2009)
- Mentor Graphics and Applied Materials Deploy OASIS.MASK Open Data Standard for Higher Efficiency Mask Manufacturing (Sep 14, 2009)
- Mentor Graphics Eldo Simulator used by STMicroelectronics to Characterize 32nm Cell Libraries (Mar 5, 2009)
- Mentor Graphics Olympus P&R and Calibre Verification Platforms Qualified for 32nm IC Designs at STMicroelectronics (Mar 2, 2009)
- Selete Selects Mentor Graphics Calibre nm Platform for EUV Flare Compensation (Feb 27, 2009)