EUV Flare and Proximity Modeling and Model-based Correction
White Paper
ABSTRACT
The introduction of EUV lithography into the semiconductor fabrication process will enable a continuation of Moore’s law below the 22 nm technology node. EUV lithography will, however, introduce new and unwanted sources of patterning distortions which must be accurately modeled and corrected on the reticle. Flare caused by scattered light in the projection optics is expected to result in several nanometers of on-wafer dimensional variation, if left uncorrected. Previous work by the authors has focused on combinations of model-based and rules-based approaches to modeling and correction of flare in EUV lithography. This paper focuses on the development of an all model-based approach to compensation of both flare and proximity effects in EUV lithography. The advantages of such an approach in terms of both model and OPC accuracy will be discussed. In addition, the authors will discuss the benefits and tradeoffs associated with hybrid OPC approaches which mix both rules-based.
Related Resources
Weighting evaluation for improving OPC model quality by using advanced SEM-Contours from wafer and mask
In this study, the weighing function of Calibre ContourCal, was evaluated using a familiar OPC data set used in previous published research. We discuss the quality of OPC model by applying different weighting...
OPC model prediction capability improvements by accounting for mask 3D-EMF effects
As mask feature sizes have shrunk well below the exposure wavelength, the thin mask of Kirchhoff approximation breaks down and 3D mask effects contribute significantly to the through-focus CD behavior of...
Roadmap to sub-nanometer OPC model accuracy
White PaperRoadmap to sub-nanometer OPC model accuracy
OPC models describe the entire patterning process, including photomask, optics, resist, and etch as a set of separately characterized modules. It is difficult, however, to definitively calibrate the optics...