How much do 'U-Value' good thermal insulation? Part I
How much do 'U-Value' good thermal insulation? Part I
I never trust a quoted value without having at least a little understanding as to what the value truly represents and how it was measured or derived. If you’ve ever felt inferior when someone quotes values or ranges of values at you take solace in the fact that there’s a fair chance they live on the surface of the pond of understanding and really don’t know how deep that pond is.
To see a value, be it U or otherwise, without units defined after it is kind of like going into a shop and asking:
“Can I have 3 please”
. “Of course sir, 3 of what though?”
. “3 bananas?”
. “3 magazines maybe?”
. “Security to aisle 4 please…”
The units of U-value are, in SI:
(It’s only the US, Liberia and Berma who have not adopted SI as a national standard, I’m sticking with the vox populi here).
W is watts, SI unit of power. As an aside power is the amount of energy per time ‘flowing’ / ‘moving’. Energy is Joules (J), time is seconds (s) so a Watt is a J/s. The units of kWh, the thing you actually pay the electricity supplier for, comes out as Joules, more on that some other time.
K is Kelvin, 0 K is absolute zero, weird stuff happens there, probably matter can’t exist or somesuch. A 1 K temperature rise is the same as a 1 degree Celsius (degC) temperature rise. The unit of temperature in the U-value is actually a temperature rise so you can use degC instead of K.
m2 is the SI unit of area. 1 m2 is the surface area of a big LCD TV
I find it easiest to think of a U-value as:
W/degC / m2
Watts per degC temperature rise per unit area
A degC temperature rise is a good thing from a built environment heating perspective. If it’s cold outside the house then you’d like to have a temperature rise up to warm comfortable temperatures inside the house.
Watts are baddies, they cost money, you’d like to not have many of those to acheve your nice comfy temperature rise up to internal room temperatures
m2 is a bit neutral, rather the surface area is just a matter of fact of how big say your house is or how big your windows are.
So, W/degC is the ‘ease’ by which heat can leave the inside of a building to the outside. If it’s big then loads of Watts can leave with only a small degC temperature rise from outside (cold) to just a little warmer inside. If it’s low then you only need a few Watts to achieve a big temperature rise from chilly outside to nice, warm and cosy inside.
So the U-value is the ease that the heat can leave a building over a given area. Low is good, high is bad.
More next time on how a U-value is actually a composite of a number of different resistances the Watts have to pass through on their route from the inside to the outside.
12 January 2010, Ross-on-Wye
More Blog Posts
- Why Not Just Shove a Heatsink on Top of it? Part 2: Heat Flow Budgets
- Why Not Just Shove a Heatsink on Top of it? Part 1
- Hot Off the Press
- Experiment vs. Simulation, Part 5: Detailed IC Package Model Calibration Methodology
- CFD - Colourful Friday Distractions
- Experiment vs. Simulation, Part 4: Compact Thermal Models
- Some Like it Hotter
- Experiment vs. Simulation, Part 3: JESD51-14
- 13 mm in 3 Months
- Experiment vs. Simulation, Part 2: TIM Thermal Conductivity
- May, 2013
- April, 2013
- March, 2013
- February, 2013
- January, 2013
- December, 2012
- November, 2012
- October, 2012
- September, 2012
- August, 2012
- July, 2012
- June, 2012
- May, 2012
- April, 2012
- March, 2012
- February, 2012
- January, 2012
- Bottlenecks and Interface Materials; Part 2 - When TIMs Go Bad
- Bridging the Simulation Supply Chain; NXP Semiconductors, a Case in Point
- Bottlenecks and Interface Materials; Part 1 - Great Thermal Bedfellows
- Is Pipe Insulation Effective?
- Emails, more Emails and Jeff Bridges
- LEDs; The future's bright and hot.
- December, 2011
- November, 2011
- October, 2011
- September, 2011
- August, 2011
- July, 2011
- June, 2011
- Come, meet FloTHERM/VENT/EFD users, learn and enjoy!
- The Future of Air Travel
- PC Overclocking and Aftermarket Modding. Part III - Power vs. Frequency?
- Applebee's switch to LED lighting and saves massively
- Mechanical U2Us are Here!
- PC Overclocking and Aftermarket Modding. Part II - Liquid Nitrogen Overclocking, How Cool is That?
- May, 2011
- April, 2011
- March, 2011
- February, 2011
- January, 2011
- FloEFD HVAC Module - Taking Built Environment CFD Simulation to the Next Level
- Beer Fridge - A Case Study in Thermal Design. Part 5 - Time for a FloBEER
- Driving Fun with CFD
- Beer Fridge - A Case Study in Thermal Design. Part 4 - FloBEER
- Beer Fridge - A Case Study in Thermal Design. Part 3 - Side Up or Upside Down?
- December, 2010
- November, 2010
- Beer Fridge - A Case Study in Thermal Design. Part 1 - A Gift
- A transient in methods: the RthJC transient method
- On a Wing and a Prayer - Part Deux
- What Can You Learn When You Turn It On?
- Oh these pilots...
- How thermal testing can help increase reliability of electronic systems?
- Measuring the real world - at least the thermal properties of semiconductor device packages
- On a wing and a prayer…
- We Love FloTHERM - 8 Reasons to Upgrade to V9.1
- October, 2010
- September, 2010
- August, 2010
- Lies, Damned Lies, and “CFD Comparison Charts” – Part IV
- Lies, Damned Lies, and “CFD Comparison Charts” – Part III
- Good Things in Little Packages
- Mind Your P’s
- Lies, Damned Lies, and “CFD Comparison Charts” – Part II
- How many frogs does a horse have?
- Lies, Damned Lies, and “CFD Comparison Charts” – Part I
- It's a wireless world! No it isn't.
- Measuring the Real World
- July, 2010
- Are you using 'Smart' in a way I am not familiar with?
- An Interview With... Clemens Lasance
- Minimizing Late Stage PCB Respins
- I was led to believe we'd have flying cars by now
- Mechanical Analysis Products Now in Mentor’s Higher Education Program
- Red Hot Electronic Thermal Analysis?
- Avoid Late Stage Design Changes
- Sony Vaio laptop in mass 'recall'
- June, 2010
- Data Center Airflow Management: Part I
- Zero to 60 ... in 8 weeks?
- The art of modelling using CFD. Part VI - Peripheral Boundary Conditions
- LEDS and Reliability
- Using Social Media for Engineering
- Olympians and Engineers - the Right Mix
- Nearly Back to Business as Usual
- The art of modelling using CFD. Part V - Grid
- May, 2010
- Quick, Easy, and Mostly Right Heatsink Performance Estimate
- The Chilling Facts
- The art of modelling using CFD. Part IV - Fans
- Using LED Lights for Data Transmission
- The art of modelling using CFD. Part III - TIGs
- CFD in High Schools
- The art of modelling using CFD. Part II - Grilles
- The art of modelling using CFD. Part I - What happens if you cross art with science?
- April, 2010
- ¡Arriba! ¡Arriba ¡Ándale! ¡Ándale!
- Not Another Volcano Story...
- The Debate about Liquid Cooled Data Centers
- Mission Impossible: Finding 100W Light Bulbs
- How much do ‘U-Value’ good thermal insulation? Part VII - "Ooo, shut that door"
- "A Faster Horse" - Mentor 'IDEAS for Mechanical' driving product development
- MicReD Technology Wins Highest Technical Honor
- Living in a Wireless World
- March, 2010
- Dad, the AV guy
- Sticking Plaster and Light beats Skin Cancer
- Leaky Valves May Delay Space Shuttle Launch
- IBM Work to take Moore's Law to 2025
- Commercial CFD Starts Here ...
- It's Spring (almost)
- Concurrent CFD Explained (Part IV)
- How much do ‘U-Value’ good thermal insulation? Part VI - revenge of the radiative heat flux
- Roundup of SEMI-THERM, FloTHERM IC launch and JEDEC
- IC package representation is central to Electronics Cooling
- The Next Industrial Revolution
- How much do ‘U-Value’ good thermal insulation? Part V
- February, 2010
- Semiconductor Package Thermal Characterization and Design as Easy as 1-2-3
- Modelling and Simulating a PC with FloEFD (Part 3)
- Gain Insight the Faster Better Way
- NEW ElectronicsCooling Magazine Website
- How much do ‘U-Value’ good thermal insulation? Part IV
- Liquid Cooling – Are We There Yet?
- EDN Hot 100 Award for FloEFD
- Foresight and X-Ray Vision or Hindsight and Regret?
- The Secret of Doing Fewer PCB Respins – Unveiled!
- Vision at 40+
- "Sledgehammer CFD" - The Best Approach?
- How much do ‘U-Value’ good thermal insulation? Part III
- FREE Exhibition at SEMI-THERM, Santa Clara February 23-24
- How much do ‘U-Value’ good thermal insulation? Part II
- Force Prediction with Concurrent CFD
- January, 2010
- How much do 'U-Value' good thermal insulation? Part I
- The recession is over, finally
- Keeping the caveman warm - HVAC blog
- FloVIZ, the free FloTHERM/FloVENT CFD results viewer, try it, it's free
- Champcar Exhaust Analysis
- Quantitavely Seeding the Flow
- Concurrent CFD Explained (Part III)
- 'Heat Trees' - taking a leaf out of natures book
- May the force be with you
- Interested in Indy Car?
- The Most Extreme CFD Model Ever Ever - Explained
- Concurrent CFD Explained (Part II)
- FloTHERM and its new XML neutral file format
- The Most Extreme CFD Model Ever Ever
- Beginning at the Beginning ... 5 Parabolic or Elliptic? - Or Somewhere In Between?
- Concurrent CFD Explained (Part I)
- So, you want to predict component temperatures do you? Part VII
- Winter Woes and LED Lights
- December, 2009
- Cooking with CFD
- So, you want to predict component temperatures do you? Part VI
- Cool Youtube Video
- The Secret’s Out!
- Hands Free CFD
- Why Thermal Characterization of Integrated Circuits (ICs) is Important?
- Wanna Know a Secret?
- So, you want to predict component temperatures do you? Part V
- Thermal Design: Who’s Job Is It Anyway?
- November, 2009
- Free Visualization Software for Effortless Communication
- More on Concurrent CFD in Product Design
- Optimizing Flow Fields with CFD
- Concurrent Design and Thoughts on 'Flows'
- A trip to MPH and Top Gear Live
- Mind Your Head(room) Again
- So, you want to predict component temperatures do you? Part IV
- Solutions Expos – Going MAD in the UK
- So, you want to predict component temperatures do you? Part III
- Mind Your Head(room)
- Advection-Is that what you call it?
- Where do you fit in?
- Beginning at the Beginning ... 4 The Birth of Practical Turbulence Modelling
- October, 2009
- Solutions Expos – Just Back
- No Substitutes, please!
- Web slashes and missing polar ice
- Going MAD at European Solutions Expos
- Process Compression is Queen
- So, you want to predict component temperatures do you? Part II
- Optimization Or Else
- So, you want to predict component temperatures do you? Part I
- What’s black and stuck on a PCB?
- Time Compression is King
- Underfloor Thermal Insulation; Why? Part III
- September, 2009
- Once a Petrolhead ...
- Underfloor Thermal Insulation; Why? Part II
- Exercising my DVR
- Can MCAD designers really do CFD?
- Underfloor Thermal Insulation; Why? Part I
- Try the latest thing in CFD – Free!
- Moore's Law, still holding true
- How to survive a recession
- No one taught me about heat spreading...
- Don't Mistake "Simple to Use CFD" for "Simple CFD".
- Sometimes things just have got to work
- Contemplate This
- ‘Simulating and Optimizing’ – A Series of Free Web Seminars
- CFD ... Or Not CFD?
- Is all Software Rubbish?
- August, 2009
- Thermatronic Stagnation (nothing to do with male deers)
- Fluid Dynamics = Fun (Just back from holiday!)
- Beginning at the Beginning ...3 Improving SIMPLE
- Fractals: Gods Artwork, Part III
- Thermatrons Must Leave
- It's a Struggle
- Unexpected conduction paths and transient analysis in FloTHERM
- Engineers Spend 60-80% of Work Time Changing Existing Designs
- Modelling and Simulating a PC with FloEFD (Part 2)
- Beginning at the Beginning ... 2
- Hayfever: Stopped by a Red Light
- Betz' law- no ifs, ands, or buts
- No more old fashion light bulbs in all EU countries
- 40x Performance Enhancement
- Free Thermal Management Design Guide
- July, 2009
- At the Speed of Heat
- Where did CFD come from?
- Beginning at the Beginning ... 1
- Thoughts about heat, sinks, and the stuff between
- A Load of HVAC TLAs
- Brighter Shade of Green
- Formula 1 and KERS
- How-to: Invert your thermal model to good effect
- Invert your thermal model to good effect
- Did you know you're doing quantum physics with the Flo* products?
- Mind Your Thermal Management To Improve Reliability
- Lower the Surprise Ratio
- Make FloEFD the way you want it!
- "I work with computers"
- Designing In The Box
- It’s Magic
- Effusivity Smackdown or Standoff?
- Tennis – it’s a rough sport
- Fluid Dynamics and BBQs
- “All models are wrong, but some are useful” Part V
- The Heat is On
- Wimbledon's Centre Court Roof
- June, 2009
- TIM2 Performance:Heat Spreading in Action
- Show Me the Money
- Air – Is it Running Out of Gas?
- 3D Electronics Cooling CFD, with FloTHERM, in Pictures
- The Lights... they're so beautiful
- The Deal with Electronics Cooling CFD - Meshing
- Design Sensitivity
- Wanna Dance?
- “All models are wrong, but some are useful” Part IV
- Bringing CFD to the Design Engineer
- X-Ray Vision Glasses … Here and Now
- The Deal with Electronics Cooling CFD: Geometry (Lots!)
- Motorbikes, racing & CFD- Part 2
- “All models are wrong, but some are useful” Part III
- Modelling and Simulating a PC with FloEFD (Part 1)
- Thermal Design Stages-Phase 2
- What’s the Deal with Electronics Cooling CFD?
- May, 2009