Home Products Mechanical Analysis Mechanical Analysis Blog tag: vba

Mechanical Analysis Blog

Posts tagged with 'vba'

Quick, Easy, and Mostly Right Heatsink Performance Estimate

Posted May 28, 2010, by John Wilson

I really enjoyed both of the Web Seminars on heat sinks; Heatsink 101 presented by Alexandra Francois-Saint-Cyr and Heatsink 201 presented by Dr. John Parry. I was especially interested in a couple of equations presented in Heatsink 101 that estimated h (convective heat transfer coefficient) and minimum fin spacing. The equations were derived from a Flat Plate in Parallel Flow theory but were simplified … Read More

Tags: vba, excel, Flat Plate, Design, Heatsink, Laminar, hand calculation, Heat Sink

Impossible Made Possible
Hockey Puck Aerodynamics
Top 10 Things I Learned From Engineers
Smoke, Smoke, Everywhere?
Agile software development practices in the Mechanical Analysis Division
A Little Goes A Long Way (But A Lot Doesn’t Go Much Further)
Comfy cars
Physician Heal Thyself
More Than Two Decades and Still Going Strong; FloTHERM and FloVENT V9.3 Now Released
Beep, Beep

May, 2012
- Impossible Made Possible
- Hockey Puck Aerodynamics
- Top 10 Things I Learned From Engineers
- Smoke, Smoke, Everywhere?
- Agile software development practices in the Mechanical Analysis Division
- A Little Goes A Long Way (But A Lot Doesn’t Go Much Further)
April, 2012
- Comfy cars
- Physician Heal Thyself
- More Than Two Decades and Still Going Strong; FloTHERM and FloVENT V9.3 Now Released
- Beep, Beep
- Simulation Software So Simple Even Teenagers Can Use It
March, 2012
- How hot is too hot?
- Earthquake Weather and Other Myths
- Cruise Ship Disaster Wind Analysis
February, 2012
- Light of the American Dream
- Bottlenecks and Interface Materials; Part 3 – Relieving Thermal Bottlenecks Reduce Temperatures
January, 2012
- Bottlenecks and Interface Materials; Part 2 - When TIMs Go Bad
- Bridging the Simulation Supply Chain; NXP Semiconductors, a Case in Point
- Bottlenecks and Interface Materials; Part 1 - Great Thermal Bedfellows
- Is Pipe Insulation Effective?
- Emails, more Emails and Jeff Bridges
- LEDs; The future's bright and hot.
December, 2011
- From Megawatts to Milliwatts; sub-micron scale thermal modelling with FloTHERM
November, 2011
- Not a Good Day
- What! All that just for that? The bonkers world of CPU cooling.
October, 2011
- Ho, Ho, Ho! Facebook moves to Lapland
- All Detailed Thermal IC Package Models are Wrong... Probably
- Underfloor Electric Heating. Part III - Penny wise, pound foolish.
- Getting to Know You
September, 2011
- The ROI of Concurrent Design with CFD
- Back to School
August, 2011
- Underfloor Electric Heating. Part II - Infrared Thermography
- Underfloor Electric Heating. Part I: In by Christmas
- This Old CFD House: Part V
- Share and Learn
July, 2011
- Smart Phones and Gadgets - the New Nemesis of Avionics
June, 2011
- Come, meet FloTHERM/VENT/EFD users, learn and enjoy!
- The Future of Air Travel
- PC Overclocking and Aftermarket Modding. Part III - Power vs. Frequency?
- Applebee's switch to LED lighting and saves massively
- Mechanical U2Us are Here!
- PC Overclocking and Aftermarket Modding. Part II - Liquid Nitrogen Overclocking, How Cool is That?
May, 2011
- This Old CFD House: Part IV
- PC Overclocking and Aftermarket Modding. Part 1 - When Colour Matters.
- This Old CFD House: Part III
April, 2011
- Desktop PC with Integrated Toaster - As if!
- Thermal Design Perfection Starts with the use of FloTHERM PACK
- We Love FloTHERM V9.2
- Feathers in our Caps
- Desktop PC with Integrated Toaster - the Future is Now
March, 2011
- This Old CFD House: Part II
- The Difference Between Theory and Practice
- Do you know the way to San Jose?
- Semitherm is Here
- End of the Lent - the Holy Week is approaching...
- Blind Faith
February, 2011
- Consolidation Happens!
- The Beer Fridge I had in Mind
- Beer Fridge - A Case Study in Thermal Design. Part 6 - Baffles and Bottlenecks
- What’s that in the sky?
- This Old CFD House: Part I
- FloEFD Helps Revolving Doors “Blowin’ in the Wind”
January, 2011
- FloEFD HVAC Module - Taking Built Environment CFD Simulation to the Next Level
- Beer Fridge - A Case Study in Thermal Design. Part 5 - Time for a FloBEER
- Driving Fun with CFD
- Beer Fridge - A Case Study in Thermal Design. Part 4 - FloBEER
- Beer Fridge - A Case Study in Thermal Design. Part 3 - Side Up or Upside Down?
December, 2010
- Perfection
- Structure functions - thermal CAT-scan?
- Beer Fridge - A Case Study in Thermal Design. Part 2 - TEC Effect
- The WIFI Blues
- LEDs do something cool!
November, 2010
- Beer Fridge - A Case Study in Thermal Design. Part 1 - A Gift
- A transient in methods: the RthJC transient method
- On a Wing and a Prayer - Part Deux
- What Can You Learn When You Turn It On?
- Oh these pilots...
- How thermal testing can help increase reliability of electronic systems?
- Measuring the real world - at least the thermal properties of semiconductor device packages
- On a wing and a prayer…
- We Love FloTHERM - 8 Reasons to Upgrade to V9.1
October, 2010
- On the Vilification of Smokers
- Revolutionary New Technology
- Identifying Thermal Bottlenecks and Shortcut Opportunities - Taking Simulation to the Next Level
- Planes, Trains and Automobiles
- One Hundredth of a Second
September, 2010
- Are You Kidding Me? Make Another One?
- Cutting energy use by 20%
August, 2010
- Lies, Damned Lies, and “CFD Comparison Charts” – Part IV
- Lies, Damned Lies, and “CFD Comparison Charts” – Part III
- Good Things in Little Packages
- Mind Your P’s
- Lies, Damned Lies, and “CFD Comparison Charts” – Part II
- How many frogs does a horse have?
- Lies, Damned Lies, and “CFD Comparison Charts” – Part I
- It's a wireless world! No it isn't.
- Measuring the Real World
July, 2010
- Are you using 'Smart' in a way I am not familiar with?
- An Interview With... Clemens Lasance
- Minimizing Late Stage PCB Respins
- I was led to believe we'd have flying cars by now
- Mechanical Analysis Products Now in Mentor’s Higher Education Program
- Red Hot Electronic Thermal Analysis?
- Avoid Late Stage Design Changes
- Sony Vaio laptop in mass 'recall'
June, 2010
- Data Center Airflow Management: Part I
- Zero to 60 ... in 8 weeks?
- The art of modelling using CFD. Part VI - Peripheral Boundary Conditions
- LEDS and Reliability
- Using Social Media for Engineering
- Olympians and Engineers - the Right Mix
- Nearly Back to Business as Usual
- The art of modelling using CFD. Part V - Grid
May, 2010
- Quick, Easy, and Mostly Right Heatsink Performance Estimate
- The Chilling Facts
- The art of modelling using CFD. Part IV - Fans
- Using LED Lights for Data Transmission
- The art of modelling using CFD. Part III - TIGs
- CFD in High Schools
- The art of modelling using CFD. Part II - Grilles
- The art of modelling using CFD. Part I - What happens if you cross art with science?
April, 2010
- ¡Arriba! ¡Arriba ¡Ándale! ¡Ándale!
- Not Another Volcano Story...
- The Debate about Liquid Cooled Data Centers
- Mission Impossible: Finding 100W Light Bulbs
- How much do ‘U-Value’ good thermal insulation? Part VII - "Ooo, shut that door"
- "A Faster Horse" - Mentor 'IDEAS for Mechanical' driving product development
- MicReD Technology Wins Highest Technical Honor
- Living in a Wireless World
March, 2010
- Dad, the AV guy
- Sticking Plaster and Light beats Skin Cancer
- Leaky Valves May Delay Space Shuttle Launch
- IBM Work to take Moore's Law to 2025
- Commercial CFD Starts Here ...
- It's Spring (almost)
- Concurrent CFD Explained (Part IV)
- How much do ‘U-Value’ good thermal insulation? Part VI - revenge of the radiative heat flux
- Roundup of SEMI-THERM, FloTHERM IC launch and JEDEC
- IC package representation is central to Electronics Cooling
- The Next Industrial Revolution
- How much do ‘U-Value’ good thermal insulation? Part V
February, 2010
- Semiconductor Package Thermal Characterization and Design as Easy as 1-2-3
- Modelling and Simulating a PC with FloEFD (Part 3)
- Gain Insight the Faster Better Way
- NEW ElectronicsCooling Magazine Website
- How much do ‘U-Value’ good thermal insulation? Part IV
- Liquid Cooling – Are We There Yet?
- EDN Hot 100 Award for FloEFD
- Foresight and X-Ray Vision or Hindsight and Regret?
- The Secret of Doing Fewer PCB Respins – Unveiled!
- Vision at 40+
- "Sledgehammer CFD" - The Best Approach?
- How much do ‘U-Value’ good thermal insulation? Part III
- FREE Exhibition at SEMI-THERM, Santa Clara February 23-24
- How much do ‘U-Value’ good thermal insulation? Part II
- Force Prediction with Concurrent CFD
January, 2010
- How much do 'U-Value' good thermal insulation? Part I
- The recession is over, finally
- Keeping the caveman warm - HVAC blog
- FloVIZ, the free FloTHERM/FloVENT CFD results viewer, try it, it's free
- Champcar Exhaust Analysis
- Quantitavely Seeding the Flow
- Concurrent CFD Explained (Part III)
- 'Heat Trees' - taking a leaf out of natures book
- May the force be with you
- Interested in Indy Car?
- The Most Extreme CFD Model Ever Ever - Explained
- Concurrent CFD Explained (Part II)
- FloTHERM and its new XML neutral file format
- The Most Extreme CFD Model Ever Ever
- It's a 3D World - Just watch Avatar
- Beginning at the Beginning ... 5 Parabolic or Elliptic? - Or Somewhere In Between?
- Concurrent CFD Explained (Part I)
- So, you want to predict component temperatures do you? Part VII
- Winter Woes and LED Lights
December, 2009
- Cooking with CFD
- So, you want to predict component temperatures do you? Part VI
- Cool Youtube Video
- The Secret’s Out!
- Hands Free CFD
- Why Thermal Characterization of Integrated Circuits (ICs) is Important?
- Wanna Know a Secret?
- So, you want to predict component temperatures do you? Part V
- Thermal Design: Who’s Job Is It Anyway?
November, 2009
- Free Visualization Software for Effortless Communication
- More on Concurrent CFD in Product Design
- Optimizing Flow Fields with CFD
- Concurrent Design and Thoughts on 'Flows'
- A trip to MPH and Top Gear Live
- Mind Your Head(room) Again
- So, you want to predict component temperatures do you? Part IV
- Solutions Expos – Going MAD in the UK
- So, you want to predict component temperatures do you? Part III
- Mind Your Head(room)
- Advection-Is that what you call it?
- Where do you fit in?
- Beginning at the Beginning ... 4 The Birth of Practical Turbulence Modelling
October, 2009
- Solutions Expos – Just Back
- No Substitutes, please!
- Web slashes and missing polar ice
- Going MAD at European Solutions Expos
- Process Compression is Queen
- So, you want to predict component temperatures do you? Part II
- Optimization Or Else
- So, you want to predict component temperatures do you? Part I
- What’s black and stuck on a PCB?
- Time Compression is King
- Underfloor Thermal Insulation; Why? Part III
September, 2009
- Once a Petrolhead ...
- Underfloor Thermal Insulation; Why? Part II
- Exercising my DVR
- Can MCAD designers really do CFD?
- Underfloor Thermal Insulation; Why? Part I
- Try the latest thing in CFD – Free!
- Moore's Law, still holding true
- How to survive a recession
- No one taught me about heat spreading...
- Don't Mistake "Simple to Use CFD" for "Simple CFD".
- Sometimes things just have got to work
- Contemplate This
- ‘Simulating and Optimizing’ – A Series of Free Web Seminars
- CFD ... Or Not CFD?
- Is all Software Rubbish?
August, 2009
- Thermatronic Stagnation (nothing to do with male deers)
- Fluid Dynamics = Fun (Just back from holiday!)
- Beginning at the Beginning ...3 Improving SIMPLE
- Fractals: Gods Artwork, Part III
- Thermatrons Must Leave
- It's a Struggle
- Unexpected conduction paths and transient analysis in FloTHERM
- Engineers Spend 60-80% of Work Time Changing Existing Designs
- Modelling and Simulating a PC with FloEFD (Part 2)
- Beginning at the Beginning ... 2
- Hayfever: Stopped by a Red Light
- Betz' law- no ifs, ands, or buts
- No more old fashion light bulbs in all EU countries
- 40x Performance Enhancement
- Free Thermal Management Design Guide
July, 2009
- At the Speed of Heat
- Where did CFD come from?
- Beginning at the Beginning ... 1
- Thoughts about heat, sinks, and the stuff between
- A Load of HVAC TLAs
- Brighter Shade of Green
- Formula 1 and KERS
- How-to: Invert your thermal model to good effect
- Invert your thermal model to good effect
- Did you know you're doing quantum physics with the Flo* products?
- Mind Your Thermal Management To Improve Reliability
- Lower the Surprise Ratio
- Make FloEFD the way you want it!
- "I work with computers"
- Designing In The Box
- It’s Magic
- Effusivity Smackdown or Standoff?
- Tennis – it’s a rough sport
- Fluid Dynamics and BBQs
- “All models are wrong, but some are useful” Part V
- The Heat is On
- Wimbledon's Centre Court Roof
June, 2009
- TIM2 Performance:Heat Spreading in Action
- Show Me the Money
- Air – Is it Running Out of Gas?
- 3D Electronics Cooling CFD, with FloTHERM, in Pictures
- The Lights... they're so beautiful
- The Deal with Electronics Cooling CFD - Meshing
- Design Sensitivity
- Wanna Dance?
- “All models are wrong, but some are useful” Part IV
- Bringing CFD to the Design Engineer
- X-Ray Vision Glasses … Here and Now
- The Deal with Electronics Cooling CFD: Geometry (Lots!)
- Motorbikes, racing & CFD- Part 2
- “All models are wrong, but some are useful” Part III
- Modelling and Simulating a PC with FloEFD (Part 1)
- Thermal Design Stages-Phase 2
- What’s the Deal with Electronics Cooling CFD?
May, 2009
- “All models are wrong, but some are useful” Part II
- Just the facts...
- What in the world is Engineering Fluid Dynamics?
- Thermal Design Stages-Phase 1
- The Start of A New Chapter
- Shortcut key to view objects in FloVIZ
- "All models are wrong, but some are useful" Part I

CFD (129)
Electronics Cooling (109)
FloEFD (69)
FloVENT (49)
Thermal Design (29)
HVAC (29)
Concurrent CFD (24)
Design Engineer (22)
Design Process (19)
Thermal Management (17)
Fluid Dynamics (14)
Upfront CFD (14)
T3ster (14)
Computational Fluid Dynamics (12)
Fluent Design (12)
Upfront Analysis (11)
Physical Prototype (11)
Fluid Flow (9)
Data Center (9)
Heatsink (9)
Thermal (8)
FloTHERM.PCB (8)
History of CFD (8)
CAD Embedded (8)
ROI (8)
Design (7)
Design Flow (7)
CAD Integration (7)
Model (7)
LED (7)
beer (7)
FloTHERM.PACK (6)
modelling (6)
U-Value (6)
Modeling (6)
Optimization (6)
Power Dissipation (6)
bottleneck (6)
JEDEC (6)
Reliability (5)
Thermal Testing (5)
Engineer (5)
LEDs (5)
CFdesign (5)
Airflow (5)
thermal bottleneck (5)
Mesh (5)
Heat Transfer (5)
PCB Respin (4)
Ed Williams (4)
Fan (4)
CTM (4)
Meshing (4)
Traditional CFD (4)
Thermal Characterization (4)
Blue Ridge Numerics (4)
Component (4)
Global Environment Fund Management Corporation (4)
Jim Spann (4)
Commercial CFD Industry (4)
MCAD (4)
Mesh Generation (4)
Accuracy (4)
Liquid Cooling (4)
CFD Comparison Chart (4)
Mechanical Analysis (4)
Optimize (4)
Cost Saving (4)
FloViz (4)
CAD-Embedded (4)
Thermal Resistor (4)
Grid (3)
FloEFD Project (3)
2-Resistor Model (3)
Flow Behavior (3)
Flow Field (3)
JEDEC JC15 (3)
BCI (3)
FloTHERM IC (3)
Temperature (3)
underfloor heating (3)
Consumer Electronics (3)
Energy Saving (3)
Respin (3)
Thermal Resistance (3)
data center cooling (3)
FloTHERM PACK (3)
overclocking (3)
DELPHI Model (3)
Delphi (3)
Environmental Impact (3)
Thermal Insulation (3)
Package Model (3)
Energy (2)
Passenger Comfort (2)
Mechanical Design (2)
Bn (2)
R&D (2)
Aerospace (2)
Semitherm (2)
Education (2)
Building HVAC (2)
Thermal Headroom (2)
Air Cooling (2)
TIM testing (2)
Cavitation (2)
Laminar (2)
Mechanical U2U (2)
CAD (2)
XML (2)
LED testing (2)
Flow (2)
Expedition (2)
thermal chokepoint (2)
Pressure Drop (2)
NXP Semiconductors (2)
EFD (2)
crawlspace (2)
Efficient (2)
Watts (2)
Valve (2)
Capture Index (2)
Semiconductor (2)
thermal transient testing (2)
art (2)
Green (2)
Heat Spreading (2)
Design of Experiments (2)
Air-Cooled Cooler (2)
FloTHERM PCB (2)
Transient (2)
Shortcut field (2)
What-If (2)
Concentration (2)
Thermal Analysis (2)
Bottleneck field (2)
Reaction Forces (2)
IC Packaging (2)
data centre (2)
Heat Sink (2)
fridge (2)
Mechanical (2)
Visualization (2)
LM80 tests (2)
2R (2)
humidity (2)
SEMI-THERM Conference (2)
RthJC (2)
science (2)
LN2 (2)
Quality (2)
EDN Hot 100 (2)
Fuel Economy (1)
TO220 (1)
future (1)
Processing Plant (1)
Design Optimisation (1)
boundary condition (1)
Mentor Graphics (1)
Turbomachinery (1)
Turbulent (1)
Sc (1)
Bob Dylan (1)
Avionics (1)
telecoms (1)
antenna (1)
Transonic (1)
Green Design (1)
SPICE (1)
Cavity Wall (1)
Allegro (1)
Extreme (1)
Copper (1)
Ventilation (1)
Smart Parts (1)
Hydraulics (1)
QA (1)
efficiency (1)
hybrid vehicles CO2 emissions (1)
Bronswerk Heat Transfer (1)
Technology (1)
Fuel Delivery (1)
Free Demo (1)
NAFEMS (1)
Mentor.com (1)
Light Bulb (1)
Flow Visualization (1)
Wind Energy (1)
FloEFD HVAC Module (1)
user meeting (1)
die level thermal analysis (1)
UNC at Chapel Hill (1)
Ease of Use (1)
Carbon Footprint (1)
MCAE (1)
Boardstation (1)
Parking Structures (1)
BGA Substrates (1)
Choosing a CFD Code (1)
package level thermal (1)
start-stop systems (1)
Hockey (1)
Reduce Cost (1)
Pipes (1)
aerodynamic (1)
ICs (1)
Psi (1)
Boundry Layer (1)
Oil and Gas (1)
TEC (1)
Consumer LED (1)
PC cooling (1)
Smoke (1)
Force Prediction (1)
Energy Efficiency (1)
Supercapacitor (1)
Olympics (1)
CAE Market (1)
Embedded Systems (1)
Product Manager (1)
Caveat Emptor (1)
JESD51-14 (1)
exhaust gas heat exchanger (1)
FloEFD for NX (1)
ANSYS (1)
Improve Functionality (1)
data centre cooling (1)
car chassis (1)
engineering change orders (1)
Boundary Conditions (1)
Wimbledon (1)
Shortcut Key (1)
thermoelectric cooler (1)
PUE (1)
Park (1)
Electric Vehicle (1)
Kristan Bromley (1)
3D (1)
Solutions Expos (1)
ASHRAE (1)
reliability testing (1)
myths of CFD (1)
non-destructive analysis (1)
engineering (1)
excel (1)
Thermal Transient (1)
IDT (1)
Wall Functions (1)
Mentor HEP (1)
Asetek (1)
LED reliability (1)
PC (1)
detailed thermal IC package models (1)
California (1)
Formula 1 (1)
Mike Maddock (1)
Concurrent Design (1)
Terra Server (1)
Travel (1)
Spray Cooling (1)
Automotive LEDs (1)
Icepak (1)
Acusim (1)
structure function (1)
Barbie (1)
hand calculation (1)
Temperature Aware (1)
cost (1)
Thermal Standard (1)
junction-to-case thermal resistance (1)
liquid nitrogen (1)
Agile development (1)
EMI shielding (1)
Smartphone (1)
Boundry (1)
bob skeleton (1)
Experiential Learning (1)
prototype (1)
Semiconductor Design (1)
CIMdata (1)
Seamless Integration (1)
Add new tag (1)
Refrigerated Display (1)
pipe (1)
pressure loss (1)
RSO (1)
Turbulent Flow (1)
ECO (1)
Design Oriented CFD (1)
Saving Cost (1)
Skin Cancer (1)
Design News Golden Mousetrap (1)
thermal design guide (1)
Automotive (1)
Surviving (1)
Free CFD Results Viewer (1)
Dan Fleetcroft (1)
Turbulence Modelling (1)
Mil-Aero (1)
Process Compression (1)
Fan Characterization (1)
Cloning (1)
smoking (1)
Duct Flow (1)
thermal interface material (1)
kitchen tap (1)
Convection (1)
Optimisation (1)
K (1)
Command Center (1)
Fun (1)
characteristics (1)
Caveman (1)
Embedded (1)
Solutions Expo (1)
Free (1)
JESD51 (1)
toast (1)
SAE World Congress (1)
FEA (1)
Multifocal (1)
clemens lasance (1)
Cooling (1)
BC (1)
Hardware (1)
Quantum Physics (1)
Pump Efficiency (1)
Rectangular Adaptive Mesh (1)
Royal Boon Edam (1)
interference (1)
Email (1)
WiFi (1)
SolidWorks (1)
Global Warming (1)
Detailed (1)
IBIS (1)
measurement hardware (1)
EDA (1)
MCPCB (1)
Validation (1)
compact model (1)
hybrid engine (1)
Chimney (1)
heat pump air conditioner (1)
Whizz-Wheel (1)
Light-Emitting Diode (1)
Enhancement (1)
speculative fiction (1)
Valves (1)
Fractal (1)
Design Sensitivity (1)
heatsink 201 (1)
Mentor (1)
Solar Heating (1)
Sustainable Design (1)
HEC (Holland Engineerings Consultants BV) (1)
electromagnetic (1)
TERALED (1)
electroincs (1)
Racing (1)
board-level (1)
Safety (1)
Crane (1)
Office Building (1)
Package Design (1)
Water Hammer (1)
MicReD (1)
aerodynamics (1)
Delphi automotive (1)
fans (1)
CFX (1)
Improve Quality (1)
Medical Equipment (1)
Shortening Design Time (1)
Professional Development (1)
Thermal Engineer (1)
Technology Evolution (1)
time constant (1)
U2U (1)
sub-micron scale (1)
chill beam (1)
World Wide Web (1)
KERS (1)
Motobike (1)
CR5000 (1)
Return on Investment (1)
aluminum (1)
Built Environment (1)
Google (1)
5-Star Support (1)
failure analysis (1)
SEMI-THERM (1)
Delphi Thermal Systems (1)
Puck (1)
Desktop Engineering (1)
Shortened Time to Market (1)
Pressure (1)
Automotive Design (1)
Integrated Circuits (1)
semiconductor packaging (1)
Network (1)
Surface Roughness (1)
Drill Bit (1)
going green (1)
CPU cooling (1)
isosurfaces (1)
CFD History (1)
SEMI-THERM Exhibition (1)
Thermal Model (1)
Electric Car (1)
Richard Bromley (1)
Design Collaboration (1)
CFD Ease of Use (1)
Azonix (1)
Green building design (1)
Schema (1)
testing system reliability (1)
LED thermal testing (1)
thermal comfort (1)
die attach void (1)
Fluent (1)
Fan-Assisted Oven (1)
Water Treatment Plan (1)
vba (1)
concept car (1)
Effusivity (1)
Cluttered Geometry (1)
Ball Trajectory (1)
Apple iMac (1)
strucutre functions (1)
parts per million (1)
Thermal Standards (1)
FloHTERM PCB (1)
F1 (1)
mechanical engineer (1)
Electronics Industry (1)
Upfront (1)
Vetronics (1)
ST Microelectronics (1)
LED Cooling (1)
v9.1 (1)
AC LED (1)
FloEFD CFD Wind Ship Cruise Boat Computational Fluid Dynamics (1)
structural analysis (1)
Telecom (1)
Visualize (1)
Smoke Movement (1)
social media (1)
Flat Plate (1)
Set Top Box (1)
Contact Temperature (1)
Integrated Device Technology (1)
Higher Education (1)
Thermal Guideline (1)
thetaJC (1)
active heatsink (1)
SCRUM (1)
Electromagnetic Interference (1)
Process Industry (1)
Nicola Minichiello (1)
Occupant Comfort (1)
X-ray Vision (1)
Software (1)
Environment (1)
Real World Design Challenge (1)
Cold Plate (1)
v9 (1)
Refrigerator (1)
insulation (1)
mixing (1)
Hypersonic (1)
Coandã Effect (1)
Trial Version (1)
Laminar Flow (1)
Comfort (1)
package (1)
design change (1)
Automotive Applications of CFD (1)
CAE (1)
Chip Package (1)
QFN (1)
NXP (1)
Medical (1)
Recession (1)
Shelley Rudman (1)
IC Package (1)
Kolb's Learning Styles (1)
Military (1)
Time Compression (1)
PLM (1)
Transitional (1)
vent (1)
Home Improvement (1)
faucet (1)
Conduction (1)
Shock Capture (1)
DegC (1)
Thermacore (1)
Center Parcs (1)
flomcad (1)
Building (1)
red hot (1)
Saving Time (1)
Light therapy (1)
dual interface method (1)
Award (1)
phase change material evaporator (1)
World Champion (1)
Electronics (1)
Milaero (1)
Green Products (1)
Rotating Reference Frame (1)
Convergence (1)
contaminant distribution (1)
Revolving Doors (1)
lawn mower (1)
TIM (1)
Solar (1)
DOE (1)
Supersonic (1)
Power Consumption (1)
heat spreader (1)
Holiday (1)
CFD MCAD CAE (1)
Design Automation (1)
Moore's Law (1)
Communicate (1)
toaster (1)

Less More

More Mechanical Analysis

Mechanical Analysis Blog

Posts tagged with 'vba'

Quick, Easy, and Mostly Right Heatsink Performance Estimate

Recent Posts

Archives

Tags

The EDA Technology Leader™