Design of Health Care Facilities Using Computational Fluid Dynamics
There are currently no dates scheduled for this event. However a recording of a previous session is available as an on-demand web seminar.View This On-Demand Web Seminar Now
This webinar considers the use of Computational Fluid Dynamics (CFD) in the study of health care facilities, and their value in designing an effective ventilation system in them. Various case studies are considered, with emphasis on the improvement in the design through interpretation of the results, and optimization of the systems.
What You Will Learn
- How CFD software can help you determine the temperature, airflow and contaminant distributions in health care facilities
- How CFD software can help you to improve the design of the ventilation system in health care facilities
- How you can analyze ‘what if’ designs before construction, or retro-fitting
About the Presenter
Andrew Manning, obtained his BEng in Mechanical Engineering at University of Nottingham in 1991, and his PhD from the same university in 1994. His PhD thesis was titled: ‘Mathematical modeling of Pulverized Coal Fired Power Station Boilers’. He joined the UK office of Flomerics Ltd in 1994 as a Consultant Engineer, and transferred to the MA, US office in January 1997. He is currently the Director of Engineering for the Mechanical Analysis Division (formerly Flomerics), North America, Mentor Graphics. He has 15 years of Computation Fluid Dynamics (CFD) based modeling experience, covering a wide range of built environment applications, including: health care facilities; laboratory spaces; Cleanrooms; atria; and office and other occupied spaces. He has been the principal CFD modeled in 5 major National Institutes of Health (NIH) studies.
He has authored many publications associated with the work done with NIH, and won two ASHRAE awards (2001 Symposium Paper Award and 2001 Willis H. Carrier Award) for his paper entitled: “Analysis of Air Supply Type and Exhaust Location in Laboratory Animal Research Facilities Using CFD”. Further, he won the U.S. Public Health Service Ninth Annual Engineering Literary Award for the “Surgical Site Protection” study.
Who Should Attend
- CFD software users involved in health care facilities design and analysis
- Engineers and architects involved in health care facilities design and analysis
- CFD Consultants
- Computational Fluid Dynamics Users
- Facility Managers for health care facilities
What do I need to watch and hear this web seminar?
Mentor Graphics’ web seminars are delivered using Adobe Connect. You will be able to login to the seminar room 15 minutes prior to the start time on the day of the presentation. You can hear the audio using your computer’s speakers via VoIP (Voice over IP) and background music will play prior to the beginning of the presentation.
Detailed system requirements
- Windows XP, Windows Vista, Windows 7, Windows 8
- Microsoft Internet Explorer 7, 8, 9, 10; Mozilla Firefox; Google Chrome
- Adobe® Flash® Player 10.3 or later
- 1.4GHz Intel® Pentium® 4 or faster processor and 512MB of RAM
Mac OS X, 10.5, 10.6, 10.7.4, 10.8
- Mozilla Firefox; Apple Safari; Google Chrome
- Adobe Flash Player 10.3
- 1.83GHz Intel Core™ Duo or faster processor and 512MB of RAM
- Ubuntu 10.04, 11.04; Red Hat Enterprise Linux 6; OpenSuSE 11.3
- Mozilla Firefox
- Adobe Flash Player 10.3
- Apple supported devices: iPad, iPad2, iPad3; iPhone 4 and 4 S, iPod touch (3rd generation minimum recommended)
- Apple supported OS versions summary: iOS 4.3.x, 5.x, or 6.x (5.x or higher recommended)
- Android supported devices: Samsung Galaxy Tab 2 (10.1), Samsung Galaxy Tab (10.1), ASUS Transformer, Samsung Galaxy Tab (7”) , Motorola Xoom, Motorola Xoom 2, Nexus 7
- Android supported OS versions summary: 2.2 and higher
- Android AIR Runtime required: 3.2 or higher
- Bandwidth: 512Kbps for participants, meeting attendees, and end users of Adobe Connect applications. Connection: DSL/cable (wired connection recommended) for Adobe Connect presenters, administrators, trainers, and event and meeting hosts.
- Enhancing Productivity in Electronics Cooling by incorporating EDA and MCAD Design workflowhttp://www.mentor.com/products/mechanical/events/introduction-to-flotherm-xt Jun 6, 2013 : Fremont, CA
- Thermal Characterization of Electronic Components & Systemshttp://www.mentor.com/products/mechanical/events/thermal-characterization-seminar Jun 11, 2013 : Stuttgart, DE
- Thermal Characterization of Electronic Components & Systemshttp://www.mentor.com/products/mechanical/events/thermal-characterization-seminar Sep 18, 2013 : Frankfurt, DE
- Thermal Characterization of Electronic Components & Systemshttp://www.mentor.com/products/mechanical/events/thermal-characterization-seminar Nov 13, 2013 : Frankfurt, DE
- FloEFD Software Hands-on Workshophttp://www.mentor.com/products/mechanical/events/floefd-software-hands-on-workshop Jun 19, 2013 : Frankfurt, Germany - (Electronics Cooling Session)
- FloEFD Software Hands-on Workshophttp://www.mentor.com/products/mechanical/events/floefd-software-hands-on-workshop Jun 19, 2013 : Frankfurt, Germany - (Mechanical & Electronics Cooling Sessions)
- FloEFD Software Hands-on Workshophttp://www.mentor.com/products/mechanical/events/floefd-software-hands-on-workshop Jun 19, 2013 : Frankfurt, Germany - (Mechanical Session)
- A Step Change in Automotive System Simulation – 1D/3D Integrationhttp://www.mentor.com/products/mechanical/events/a-step-change-in-automotive-system-simulation---1d-3d-integration Jul 3, 2013 : Heritage Motor Centre, Gaydon, UK
- A Step Change in Mil/Aero System Simulation – 1D/3D Integrationhttp://www.mentor.com/products/mechanical/events/a-step-change-in-mil-aero-system-simulation---1d-3d-integration Jul 11, 2013 : Mentor Graphics, Newbury, UK