Interactive Routing - What would you like to see improved or added?
Interactive Routing - What would you like to see improved or added?
Posted May 20, 2009, by Charles Pfeil
Tags: Enhancements, Interactive Routing
What features would you like to see improved or added to interactive routing? I am asking this question for two reasons. First, I suspect that what you want may already be available but it is not obvious. Second, in a never ending quest to improve interactive routing, I would like to know what is of interest to users. Yes I know there are hundreds of requests for this and that in our Support Net and enhancement databases and believe me, I know of many things that can be improved. 
But this is a blog and a good place to discuss this stuff!
Preparing RecommendationsAbout Charles Pfeil
More Posts by Charles Pfeil
More Blog Posts
Preparing RecommendationsRecent Posts
- Need stitching vias?
- PADS Tips and Tricks: Pin Swapping
- Turn off your phone!
- Is it SSN or is it Crosstalk?
- Crosstalk is everywhere
- PADS Tips and Tricks: Via Shielding
- The cure for sick waveforms
- Running at 6GHz with your eyes closed can be scary
- PADS Tips and Tricks: Sense Lines
- It's never too late
Archives
- May, 2012
- April, 2012
- March, 2012
- Running at 6GHz with your eyes closed can be scary
- PADS Tips and Tricks: Sense Lines
- It's never too late
- PADS Tips and Tricks - Downloading New License File
- PADS Tips and Tricks: Differential Pairs
- Great Things in Small Packages
- PADS Tips and Tricks – Installation and Licensing
- PADS 9.4 Released with Unique Technology
- The Parallel Pain
- Put the Pieces in Place for SERDES Success
- Know your limits
- PADS Tips and Tricks - Cross Probing
- February, 2012
- January, 2012
- November, 2011
- September, 2011
- August, 2011
- July, 2011
- June, 2011
- May, 2011
- April, 2011
- March, 2011
- February, 2011
- January, 2011
- PCB Design Perfection Starts in the CAD Library - Part 12
- The length of your terminator doesn't matter
- HDI Via-In-Pad (VIP)
- Vias are longer than their length
- Stack or Stagger MicroVias?
- How do you manage your trace lengths?
- PCB Design Perfection Starts in the CAD Library - Part 11
- Why PCB Design Matters to the Executive
- PCB Design Perfection Starts in the CAD Library - Part 10
- S-parameters are for more than just packages
- PCB Market Share - Who cares?
- Making SERDES sims faster with IBIS-AMI
- Tired of waiting for your SPICE to finish?
- PCB Design Perfection Starts in the CAD Library - Part 9: BGA Components
- December, 2010
- November, 2010
- October, 2010
- September, 2010
- July, 2010
- June, 2010
- Fundamentals of SI (Part 3) - Impedance
- Challenge For Dynamic Flex: Impedance Control
- Technology Drivers For Printed Circuits-REVISITED
- EIGHT (8) KEY HDI DESIGN FEATURES
- "Made In America"
- Datasheets: Please give us some input!
- vSure, For Sure
- DFM, starts with Design and ends with Manufacturing
- Design for obfuscation!
- Assess Your PCB Development Performance
- Return to the Colonies
- May, 2010
- April, 2010
- March, 2010
- February, 2010
- January, 2010
- December, 2009
- November, 2009
- October, 2009
- The Halloween Rush
- Kontron - 2009 PCB TLA computer category winner
- PCB Does Matter
- Desktop PCB and Technology
- PCB Design - How Many Monitors?
- Tellabs - 2009 PCB TLA overall winner
- PCB design trends show increasing complexity
- 2009 Technology Leadership Awards – The results are in!
- With A Little Help From My Friends
- September, 2009
- The Radical Future of R&D
- How beer was instrumental in kick-starting the industrial revolution. How lessons learned then can assist in your latest Multi-Gbps Serial Channel Design
- Welcome to the New Multi-Gbps Memory and Serial Channel Design Blog
- Design Reviews in a Virtual World
- Right Tool for the Job!
- DxDesigner Multi-PCB Project (Part 11)
- The verdict is (almost) in!
- August, 2009
- July, 2009
- June, 2009
- Power to the People!
- New Chapters for the HDI HANDBOOK
- “Desktop” versus “Enterprise”. Which is for you?
- Compete with fellow PCB designers for Mentor’s Technology Leadership Awards
- Multiple PCB Boards, One DxDesigner Project: The Coil Winder (Part 1)
- Observations from the Road
- HDI Training for Fabricators
- You Are Special!!!!!
- Innovate like Edison..... or Not....
- Trend to RF/Analog/Digital mixed technology boards
- PCB Designers are from Venus, Mechanical Designers are from Mars!
- Self-Learning Educational Opportunities for Designers
- PCB Developers are the Unsung Heroes of Innovation!
- A Passage to India: Questions & Answers for the Introduction to PADS 9.0 Webinar
- Recession: Should you pull back or get more aggressive?
- May, 2009
- Buried Capacitance Materials for Power Integrity
- Expecting more from your PCB design tool supplier
- Interactive Routing - What would you like to see improved or added?
- PTS Coupons for TH Process Control
- Free Download ! All You Wanted To Know About HDI....and MORE!
- Polymer printed transistors
- What will be growth industries for PCBs?
- My Inverter to drive HD LEDs
- Wifi Signal Strength
- What's important when you want to "design for the lowest cost"?
- How do you get started in HDI?
- Where do you draw the line?
- U2U Expedition PCB Questions, Issues and Answers - Part I
- "BGA Breakouts and Routing" Review and Second Edition Now Available
- Personalized Menus - Use them?
- Effective BGA Fanout Patterns - Presentation with Voiceover
- High Density Interconnect in Expedition PCB
- Tipping Point for Large BGAs
- Ribbon Menus - Do you like them?
Tags
- HyperLynx (45)
- PADS (25)
- Signal Integrity (19)
- Expedition (18)
- Power Integrity (14)
- HDI (12)
- Functional Simulation (9)
- SERDES (9)
- Mixed Signal Functional Design (9)
- Wind Turbine (9)
- Coil Winder (9)
- DxDesigner (9)
- Multi-Board Projects (9)
- WindTurbine (8)
- HyperLynx Analog (8)
- 2009 (8)
- HyperLynx PI (8)
- System Design (8)
- BGA (8)
- Expedition Enterprise (8)
- PCB System Design (7)
- Dave Brady (7)
- DesignCon 2010 (7)
- CAD Library (7)
- PCB_Design (7)
- stackup (6)
- DDR3 (5)
- PCB Design Software (5)
- Decoupling (5)
- Constraints (5)
- PADS 9.0 (5)
- Pre-Layout (4)
- Expedition_Enterprise (4)
- CAD (4)
- DC Drop (4)
- SPICE (4)
- PCB Flow (4)
- impedance (4)
- SSN (4)
- PCB_Flow (4)
- Collaboration (4)
- Thermal Analysis (4)
- IBIS (4)
- PCB Manufacturing (4)
- library tools (4)
- PCB Software (4)
- Expedition PCB (4)
- crosstalk (4)
- vias (4)
- post-layout (3)
- Power Distribution (3)
- HDI_Design (3)
- PCB Simulation (3)
- PDN (3)
- Route (3)
- Science Fiction (3)
- Education (3)
- Breakout (3)
- timing (3)
- Expedition_PCB (3)
- correlation (3)
- BGA_Routing (3)
- DDR2 (3)
- via (3)
- Planet HyperLynx (3)
- Current Density (3)
- "Embedded Passives" (3)
- Board_Fabrication (3)
- Design_Methods (3)
- Fasteye (3)
- measurement (3)
- ODB++ (3)
- dielectric constant (2)
- 3D field solver (2)
- CAD Libraries (2)
- HyperLynx SI (2)
- DC (2)
- Embedded (2)
- IE3D (2)
- EP (2)
- Technology Leadership (2)
- Board_Station (2)
- John Isaac (2)
- design concurrency (2)
- BER (2)
- Aberdeen (2)
- DesignCon (2)
- Padstack (2)
- noise coupling (2)
- equalization (2)
- Printed Circuit Board (2)
- Design for Manufacture (2)
- Edge Rate (2)
- Gerber (2)
- Padstacks (2)
- Innovation (2)
- IR Drop (2)
- Modeling (2)
- Fundamentals (2)
- AC (2)
- SI (2)
- EMI (2)
- Capacitor (2)
- PCB Development (2)
- 3D via (2)
- Mentor Graphics (2)
- Quality (2)
- RF (2)
- Voltage Ripple (2)
- MicroVia (2)
- DDRx (2)
- PCB Tooling (2)
- TLA (2)
- PCB Analysis (2)
- Apex 2010 (2)
- Gentry Lee (2)
- dielectric (2)
- JPL (2)
- Tech Bites (1)
- CFL (1)
- PCB routing (1)
- data sheet (1)
- Military Electronics (1)
- DesignVision Award (1)
- AutoCAD (1)
- Imperial Units (1)
- SATA (1)
- Monitors (1)
- Laminate (1)
- Expedition Enterrpise (1)
- PCB Layout (1)
- Electromechanical (1)
- EDA (1)
- Soldermask (1)
- RF Signals (1)
- fiducials (1)
- embedded parts (1)
- rules of thumb (1)
- SSI (1)
- Broadcom (1)
- Thermal Design (1)
- PCB Reliability (1)
- Electronic Warfare (1)
- Critical Nets (1)
- PCB Standards (1)
- technology_leadership_awards (1)
- PCB_Manufacturing (1)
- IBIS 5.0 (1)
- Mechanical Analysis (1)
- OLED (1)
- Parametric Test System (1)
- Boot Error (1)
- PCB_Blog (1)
- LP Calculator (1)
- EMAP (1)
- Thomas Edison (1)
- FloTHERM PCB (1)
- HDI Design (1)
- RF_Simulation (1)
- Mounting Holes (1)
- concurrency (1)
- parallel bus (1)
- Models (1)
- Signal Quality (1)
- Power Distribution Networks (1)
- high speed design (1)
- Conductors (1)
- Data Corruption (1)
- Menus (1)
- layers (1)
- Xtreme PCB (1)
- Design Vision Award (1)
- Allegro (1)
- PCB Mfg (1)
- Pre-route (1)
- Wireless (1)
- Screws (1)
- virtual labs (1)
- write leveling (1)
- Return on Investment (1)
- Fujitsu (1)
- Etch Factors (1)
- Data Loss (1)
- SiP (1)
- single-ended (1)
- Via-In-Pad (1)
- Mentor (1)
- Boardstation (1)
- Halloween (1)
- Radio (1)
- length match (1)
- trapezoidal traces (1)
- interconnect loss (1)
- Eye Diagram (1)
- Engineers (1)
- PCB Innovation (1)
- Courses (1)
- Layout & Routing (1)
- Power Analysis (1)
- GUI (1)
- route density (1)
- stub (1)
- crosstalk v SSN (1)
- PCB cleaning (1)
- MCAD (1)
- HD (1)
- Redesign (1)
- JPC Standards (1)
- Multi-GHz (1)
- channel analysis (1)
- V5 (1)
- Technology (1)
- IOD (1)
- Time-to-Market (1)
- trace delay (1)
- Interactive Routing (1)
- Power Supply Noise (1)
- Control Scheme (1)
- Reference Designator (1)
- stitching vias (1)
- via coupling (1)
- Email (1)
- 3D (1)
- LEDs (1)
- OEM_Manufacturing (1)
- Cost Competitive (1)
- High Speed Serial Channel (1)
- Webinar (1)
- FPGA (1)
- Quick Tour (1)
- Voltage Sag (1)
- PCB Collaboration (1)
- Jet Propulsion Lab (1)
- Design for Manufacturing (1)
- FloEFD (1)
- Power_Integrity (1)
- HDI_Redesign (1)
- Yields (1)
- Multi-Gbps (1)
- IEC Standards (1)
- Breakaway Panel (1)
- ASIC (1)
- delay (1)
- Signal Processing (1)
- Reduced Product Cost (1)
- DRC (1)
- U2U (1)
- 3D EM (1)
- SAS (1)
- Graphics (1)
- FR4 (1)
- Multi-Gigabit (1)
- ECAD_MCAD (1)
- Silicon (1)
- PTS (1)
- Ham Radio (1)
- IBIS-AMI (1)
- V-Groove Scoring (1)
- embedded actives (1)
- Design Methodology (1)
- LED (1)
- BGA Breakout (1)
- datasheet (1)
- PCB 007 (1)
- Olympic (1)
- high frequency nets (1)
- Metric Units (1)
- Concurrent Design (1)
- 6GHz (1)
- PCB_Laminate (1)
- HALT (1)
- PCB power design (1)
- EMS (1)
- IC (1)
- WiFi (1)
- IPC-7351 (1)
- ECP (1)
- User Group (1)
- Design Engineer (1)
- Process Control (1)
- EW (1)
- Mixed_Technology (1)
- ZM_shared_anti_pad (1)
- virtual_prototyping (1)
- PADS Evaluation (1)
- HyperLynx 8.0 (1)
- AT&T (1)
- Plate Through Hole (1)
- Cost Saving (1)
- Place_and_Route (1)
- EMC (1)
- intgegral resistors (1)
- Time to Market (1)
- Steve Kaufer (1)
- Respin (1)
- HDI Redesign (1)
- Planning (1)
- RF Solution (1)
- PCB Mounting Holes (1)
- IP_management (1)
- slew rate derating (1)
- AMI (1)
- Business Drivers (1)
- Customer Testimonials (1)
- fast networks (1)
- Coupons (1)
- Personalized Menus (1)
- routing density (1)
- board-level (1)
- Test Vehicles (1)
- Washers (1)
- measurement correlation (1)
- parallel (1)
- ATM (1)
- Ribbon Menu (1)
- Multimedia (1)
- Design Creation (1)
- PCB Simultaion (1)
- High Speed (1)
- differential (1)
- coupled noise (1)
- Lead-free Solder (1)
- System Design Software (1)
- CR5000 (1)
- LineSim (1)
- Technology_Leadership (1)
- pre-emphasis (1)
- Virtex 5 (1)
- Santa (1)
- Self Learning (1)
- Enhancements (1)
- PI (1)
- Assembly Drawing (1)
- stitching capacitors (1)
- simultaneous switching noise (1)
- Telephone (1)
- PCB Layout Software (1)
- Mechanical Design (1)
- Inverter (1)
- Test_Vehicles (1)
- Lowering Costs (1)
- length matching (1)
- Xilinx (1)
- Thanks (1)
- Reliabililty (1)
- velocity of propagation (1)
- Product Ddevelopment Cost (1)
- Fanout (1)
- Silkscreen (1)
- PCI Express (1)
- connector crosstalk (1)
- Layout and Routing (1)
- Electronics Industry (1)
- Executive Study (1)
- PCB_Reliability (1)
- Fabricator Capability (1)
- Linear Channel Analysis (1)
- S-parameter (1)
- bit error rate (1)
- Online Community (1)
- Design Collaboration (1)
- I/O Designer (1)
- Board Station Xe (1)
- critical length (1)
- High Speed PCB (1)
- Voltage Drop (1)
- DDRx Wizard (1)
- PCB Grid (1)
- PADS Tips and Tricks (1)
- Dialogs (1)
- PCB_mfg (1)
- Reliability (1)
- PCB Verification (1)
- Signal_Integrity (1)
- RFID (1)
- JPC (1)
- NPI (1)
- IPC Standards (1)
- Mouse Bite (1)
- HERMES (1)
Comments
No one has commented yet on this post. Be the first to comment below.
Add Your Comment
Please complete the following information to comment or sign in.