Santa Clara U2U Coming Up On April 26
Santa Clara U2U Coming Up On April 26
Register
for U2U Santa Clara
Register
now for Mentor Graphics User Group Meeting in Santa Clara, CA on Tuesday, April
26, 2011 at the Santa Clara Marriott. This complimentary one day meeting
will include product roadmap and technical sessions on Calibre, Functional
Verification, Silicon Test & Yield Analysis, Custom IC/AMS, PCB Flow and
Place & Route. Learn, share, and network with your peers: http://www.mentor.com/user2user
About Charles Pfeil
More Posts by Charles Pfeil
More Blog Posts
← Ever wonder the effects of shared anti-pads on differential signals?
Inch to Metric Conversion Tables for PCB design →
Preparing RecommendationsRecent Posts
- Need stitching vias?
- PADS Tips and Tricks: Pin Swapping
- Turn off your phone!
- Is it SSN or is it Crosstalk?
- Crosstalk is everywhere
- PADS Tips and Tricks: Via Shielding
- The cure for sick waveforms
- Running at 6GHz with your eyes closed can be scary
- PADS Tips and Tricks: Sense Lines
- It's never too late
Archives
- May, 2012
- April, 2012
- March, 2012
- Running at 6GHz with your eyes closed can be scary
- PADS Tips and Tricks: Sense Lines
- It's never too late
- PADS Tips and Tricks - Downloading New License File
- PADS Tips and Tricks: Differential Pairs
- Great Things in Small Packages
- PADS Tips and Tricks – Installation and Licensing
- PADS 9.4 Released with Unique Technology
- The Parallel Pain
- Put the Pieces in Place for SERDES Success
- Know your limits
- PADS Tips and Tricks - Cross Probing
- February, 2012
- January, 2012
- November, 2011
- September, 2011
- August, 2011
- July, 2011
- June, 2011
- May, 2011
- April, 2011
- March, 2011
- February, 2011
- January, 2011
- PCB Design Perfection Starts in the CAD Library - Part 12
- The length of your terminator doesn't matter
- HDI Via-In-Pad (VIP)
- Vias are longer than their length
- Stack or Stagger MicroVias?
- How do you manage your trace lengths?
- PCB Design Perfection Starts in the CAD Library - Part 11
- Why PCB Design Matters to the Executive
- PCB Design Perfection Starts in the CAD Library - Part 10
- S-parameters are for more than just packages
- PCB Market Share - Who cares?
- Making SERDES sims faster with IBIS-AMI
- Tired of waiting for your SPICE to finish?
- PCB Design Perfection Starts in the CAD Library - Part 9: BGA Components
- December, 2010
- November, 2010
- October, 2010
- September, 2010
- July, 2010
- June, 2010
- Fundamentals of SI (Part 3) - Impedance
- Challenge For Dynamic Flex: Impedance Control
- Technology Drivers For Printed Circuits-REVISITED
- EIGHT (8) KEY HDI DESIGN FEATURES
- "Made In America"
- Datasheets: Please give us some input!
- vSure, For Sure
- DFM, starts with Design and ends with Manufacturing
- Design for obfuscation!
- Assess Your PCB Development Performance
- Return to the Colonies
- May, 2010
- April, 2010
- March, 2010
- February, 2010
- January, 2010
- December, 2009
- November, 2009
- October, 2009
- The Halloween Rush
- Kontron - 2009 PCB TLA computer category winner
- PCB Does Matter
- Desktop PCB and Technology
- PCB Design - How Many Monitors?
- Tellabs - 2009 PCB TLA overall winner
- PCB design trends show increasing complexity
- 2009 Technology Leadership Awards – The results are in!
- With A Little Help From My Friends
- September, 2009
- The Radical Future of R&D
- How beer was instrumental in kick-starting the industrial revolution. How lessons learned then can assist in your latest Multi-Gbps Serial Channel Design
- Welcome to the New Multi-Gbps Memory and Serial Channel Design Blog
- Design Reviews in a Virtual World
- Right Tool for the Job!
- DxDesigner Multi-PCB Project (Part 11)
- The verdict is (almost) in!
- August, 2009
- July, 2009
- June, 2009
- Power to the People!
- New Chapters for the HDI HANDBOOK
- “Desktop” versus “Enterprise”. Which is for you?
- Compete with fellow PCB designers for Mentor’s Technology Leadership Awards
- Multiple PCB Boards, One DxDesigner Project: The Coil Winder (Part 1)
- Observations from the Road
- HDI Training for Fabricators
- You Are Special!!!!!
- Innovate like Edison..... or Not....
- Trend to RF/Analog/Digital mixed technology boards
- PCB Designers are from Venus, Mechanical Designers are from Mars!
- Self-Learning Educational Opportunities for Designers
- PCB Developers are the Unsung Heroes of Innovation!
- A Passage to India: Questions & Answers for the Introduction to PADS 9.0 Webinar
- Recession: Should you pull back or get more aggressive?
- May, 2009
- Buried Capacitance Materials for Power Integrity
- Expecting more from your PCB design tool supplier
- Interactive Routing - What would you like to see improved or added?
- PTS Coupons for TH Process Control
- Free Download ! All You Wanted To Know About HDI....and MORE!
- Polymer printed transistors
- What will be growth industries for PCBs?
- My Inverter to drive HD LEDs
- Wifi Signal Strength
- What's important when you want to "design for the lowest cost"?
- How do you get started in HDI?
- Where do you draw the line?
- U2U Expedition PCB Questions, Issues and Answers - Part I
- "BGA Breakouts and Routing" Review and Second Edition Now Available
- Personalized Menus - Use them?
- Effective BGA Fanout Patterns - Presentation with Voiceover
- High Density Interconnect in Expedition PCB
- Tipping Point for Large BGAs
- Ribbon Menus - Do you like them?
Tags
- HyperLynx (45)
- PADS (25)
- Signal Integrity (19)
- Expedition (18)
- Power Integrity (14)
- HDI (12)
- Functional Simulation (9)
- SERDES (9)
- Mixed Signal Functional Design (9)
- Wind Turbine (9)
- Coil Winder (9)
- DxDesigner (9)
- Multi-Board Projects (9)
- WindTurbine (8)
- HyperLynx Analog (8)
- 2009 (8)
- HyperLynx PI (8)
- System Design (8)
- BGA (8)
- Expedition Enterprise (8)
- PCB System Design (7)
- Dave Brady (7)
- DesignCon 2010 (7)
- CAD Library (7)
- PCB_Design (7)
- stackup (6)
- DDR3 (5)
- PCB Design Software (5)
- Decoupling (5)
- Constraints (5)
- PADS 9.0 (5)
- Pre-Layout (4)
- Expedition_Enterprise (4)
- CAD (4)
- DC Drop (4)
- SPICE (4)
- PCB Flow (4)
- impedance (4)
- SSN (4)
- PCB_Flow (4)
- Collaboration (4)
- Thermal Analysis (4)
- IBIS (4)
- PCB Manufacturing (4)
- library tools (4)
- PCB Software (4)
- Expedition PCB (4)
- crosstalk (4)
- vias (4)
- post-layout (3)
- Power Distribution (3)
- HDI_Design (3)
- PCB Simulation (3)
- PDN (3)
- Route (3)
- Science Fiction (3)
- Education (3)
- Breakout (3)
- timing (3)
- Expedition_PCB (3)
- correlation (3)
- BGA_Routing (3)
- DDR2 (3)
- via (3)
- Planet HyperLynx (3)
- Current Density (3)
- "Embedded Passives" (3)
- Board_Fabrication (3)
- Design_Methods (3)
- Fasteye (3)
- measurement (3)
- ODB++ (3)
- dielectric constant (2)
- 3D field solver (2)
- CAD Libraries (2)
- HyperLynx SI (2)
- DC (2)
- Embedded (2)
- IE3D (2)
- EP (2)
- Technology Leadership (2)
- Board_Station (2)
- John Isaac (2)
- design concurrency (2)
- BER (2)
- Aberdeen (2)
- DesignCon (2)
- Padstack (2)
- noise coupling (2)
- equalization (2)
- Printed Circuit Board (2)
- Design for Manufacture (2)
- Edge Rate (2)
- Gerber (2)
- Padstacks (2)
- Innovation (2)
- IR Drop (2)
- Modeling (2)
- Fundamentals (2)
- AC (2)
- SI (2)
- EMI (2)
- Capacitor (2)
- PCB Development (2)
- 3D via (2)
- Mentor Graphics (2)
- Quality (2)
- RF (2)
- Voltage Ripple (2)
- MicroVia (2)
- DDRx (2)
- PCB Tooling (2)
- TLA (2)
- PCB Analysis (2)
- Apex 2010 (2)
- Gentry Lee (2)
- dielectric (2)
- JPL (2)
- Tech Bites (1)
- CFL (1)
- PCB routing (1)
- data sheet (1)
- Military Electronics (1)
- DesignVision Award (1)
- AutoCAD (1)
- Imperial Units (1)
- SATA (1)
- Monitors (1)
- Laminate (1)
- Expedition Enterrpise (1)
- PCB Layout (1)
- Electromechanical (1)
- EDA (1)
- Soldermask (1)
- RF Signals (1)
- fiducials (1)
- embedded parts (1)
- rules of thumb (1)
- SSI (1)
- Broadcom (1)
- Thermal Design (1)
- PCB Reliability (1)
- Electronic Warfare (1)
- Critical Nets (1)
- PCB Standards (1)
- technology_leadership_awards (1)
- PCB_Manufacturing (1)
- IBIS 5.0 (1)
- Mechanical Analysis (1)
- OLED (1)
- Parametric Test System (1)
- Boot Error (1)
- PCB_Blog (1)
- LP Calculator (1)
- EMAP (1)
- Thomas Edison (1)
- FloTHERM PCB (1)
- HDI Design (1)
- RF_Simulation (1)
- Mounting Holes (1)
- concurrency (1)
- parallel bus (1)
- Models (1)
- Signal Quality (1)
- Power Distribution Networks (1)
- high speed design (1)
- Conductors (1)
- Data Corruption (1)
- Menus (1)
- layers (1)
- Xtreme PCB (1)
- Design Vision Award (1)
- Allegro (1)
- PCB Mfg (1)
- Pre-route (1)
- Wireless (1)
- Screws (1)
- virtual labs (1)
- write leveling (1)
- Return on Investment (1)
- Fujitsu (1)
- Etch Factors (1)
- Data Loss (1)
- SiP (1)
- single-ended (1)
- Via-In-Pad (1)
- Mentor (1)
- Boardstation (1)
- Halloween (1)
- Radio (1)
- length match (1)
- trapezoidal traces (1)
- interconnect loss (1)
- Eye Diagram (1)
- Engineers (1)
- PCB Innovation (1)
- Courses (1)
- Layout & Routing (1)
- Power Analysis (1)
- GUI (1)
- route density (1)
- stub (1)
- crosstalk v SSN (1)
- PCB cleaning (1)
- MCAD (1)
- HD (1)
- Redesign (1)
- JPC Standards (1)
- Multi-GHz (1)
- channel analysis (1)
- V5 (1)
- Technology (1)
- IOD (1)
- Time-to-Market (1)
- trace delay (1)
- Interactive Routing (1)
- Power Supply Noise (1)
- Control Scheme (1)
- Reference Designator (1)
- stitching vias (1)
- via coupling (1)
- Email (1)
- 3D (1)
- LEDs (1)
- OEM_Manufacturing (1)
- Cost Competitive (1)
- High Speed Serial Channel (1)
- Webinar (1)
- FPGA (1)
- Quick Tour (1)
- Voltage Sag (1)
- PCB Collaboration (1)
- Jet Propulsion Lab (1)
- Design for Manufacturing (1)
- FloEFD (1)
- Power_Integrity (1)
- HDI_Redesign (1)
- Yields (1)
- Multi-Gbps (1)
- IEC Standards (1)
- Breakaway Panel (1)
- ASIC (1)
- delay (1)
- Signal Processing (1)
- Reduced Product Cost (1)
- DRC (1)
- U2U (1)
- 3D EM (1)
- SAS (1)
- Graphics (1)
- FR4 (1)
- Multi-Gigabit (1)
- ECAD_MCAD (1)
- Silicon (1)
- PTS (1)
- Ham Radio (1)
- IBIS-AMI (1)
- V-Groove Scoring (1)
- embedded actives (1)
- Design Methodology (1)
- LED (1)
- BGA Breakout (1)
- datasheet (1)
- PCB 007 (1)
- Olympic (1)
- high frequency nets (1)
- Metric Units (1)
- Concurrent Design (1)
- 6GHz (1)
- PCB_Laminate (1)
- HALT (1)
- PCB power design (1)
- EMS (1)
- IC (1)
- WiFi (1)
- IPC-7351 (1)
- ECP (1)
- User Group (1)
- Design Engineer (1)
- Process Control (1)
- EW (1)
- Mixed_Technology (1)
- ZM_shared_anti_pad (1)
- virtual_prototyping (1)
- PADS Evaluation (1)
- HyperLynx 8.0 (1)
- AT&T (1)
- Plate Through Hole (1)
- Cost Saving (1)
- Place_and_Route (1)
- EMC (1)
- intgegral resistors (1)
- Time to Market (1)
- Steve Kaufer (1)
- Respin (1)
- HDI Redesign (1)
- Planning (1)
- RF Solution (1)
- PCB Mounting Holes (1)
- IP_management (1)
- slew rate derating (1)
- AMI (1)
- Business Drivers (1)
- Customer Testimonials (1)
- fast networks (1)
- Coupons (1)
- Personalized Menus (1)
- routing density (1)
- board-level (1)
- Test Vehicles (1)
- Washers (1)
- measurement correlation (1)
- parallel (1)
- ATM (1)
- Ribbon Menu (1)
- Multimedia (1)
- Design Creation (1)
- PCB Simultaion (1)
- High Speed (1)
- differential (1)
- coupled noise (1)
- Lead-free Solder (1)
- System Design Software (1)
- CR5000 (1)
- LineSim (1)
- Technology_Leadership (1)
- pre-emphasis (1)
- Virtex 5 (1)
- Santa (1)
- Self Learning (1)
- Enhancements (1)
- PI (1)
- Assembly Drawing (1)
- stitching capacitors (1)
- simultaneous switching noise (1)
- Telephone (1)
- PCB Layout Software (1)
- Mechanical Design (1)
- Inverter (1)
- Test_Vehicles (1)
- Lowering Costs (1)
- length matching (1)
- Xilinx (1)
- Thanks (1)
- Reliabililty (1)
- velocity of propagation (1)
- Product Ddevelopment Cost (1)
- Fanout (1)
- Silkscreen (1)
- PCI Express (1)
- connector crosstalk (1)
- Layout and Routing (1)
- Electronics Industry (1)
- Executive Study (1)
- PCB_Reliability (1)
- Fabricator Capability (1)
- Linear Channel Analysis (1)
- S-parameter (1)
- bit error rate (1)
- Online Community (1)
- Design Collaboration (1)
- I/O Designer (1)
- Board Station Xe (1)
- critical length (1)
- High Speed PCB (1)
- Voltage Drop (1)
- DDRx Wizard (1)
- PCB Grid (1)
- PADS Tips and Tricks (1)
- Dialogs (1)
- PCB_mfg (1)
- Reliability (1)
- PCB Verification (1)
- Signal_Integrity (1)
- RFID (1)
- JPC (1)
- NPI (1)
- IPC Standards (1)
- Mouse Bite (1)
- HERMES (1)
Comments
No one has commented yet on this post. Be the first to comment below.
Add Your Comment
Please complete the following information to comment or sign in.