Mentor Graphics Training

ModelSim / Questa Core: HDL Simulation teaches you to effectively use ModelSim / Questa Core to verify VHDL, Verilog, SystemVerilog, and mixed HDL designs. You will learn how ModelSim / Questa Core supports HDL behavioral simulations, and some basic concepts in the digital design flow. Hands-on lab exercises will reinforce lecture and discussion topics and provide you with extensive tool usage experience under the guidance of our industry expert instructors.

More upcoming dates (5 total)

6/20/13	Meudon, FR
7/16/13	Dallas, TX
8/20/13	Online
9/17/13	Fremont, CA
11/05/13	Herzliya, IL

This course will help you understand the basic concepts of power distribution and delivery on a PCB, power integrity simulation, identification of power distribution problems on your PCB, and fixing these problems early in the design cycle.

More upcoming dates (9 total)

6/24/13	Herzliya, IL
7/17/13	Marlborough, MA
8/27/13	Munich, DE
9/17/13	Online
9/26/13	Marlborough, MA
11/07/13	Fremont, CA
11/12/13	Munich, DE
1/15/14	Longmont, CO
3/10/14	Marlborough, MA

This course will teach you the workflow of laying out a printed circuit board using the latest version of Mentor Graphics PADS Layout. You will be guided through the steps necessary to design a printed circuit board. Course highlights include creating physical components, importing netlists, adding/updating parts, routing connections, generating reports and Gerber information.

More upcoming dates (10 total)

6/24/13	Marlborough, MA
7/30/13	Fremont, CA
8/19/13	Online
8/20/13	Longmont, CO
9/23/13	Longmont, CO
10/23/13	Fremont, CA
11/05/13	Longmont, CO
11/11/13	Online
12/16/13	Marlborough, MA
1/27/14	Fremont, CA

Calibre® eqDRC represents an important breakthrough in physical verification, making it possible for anyone performing design rule and LVS checks to truly do more with less.

More upcoming dates (6 total)

6/24/13	Singapore, SG
7/22/13	Tempe, AZ
8/04/13	Herzliya, IL
10/01/13	Hsinchu City, TW
10/14/13	Munich, DE
2/05/14	Fremont, CA

This course will help you understand the wide breadth of problem areas addressed by Calibre PERC, including ESD, advanced ERC, multiple power domains, point-to-point resistance, and current density.

More upcoming dates (2 total)

6/24/13	Online
7/17/13	Tempe, AZ

This course will help you acquire the skills needed to maximize your usage of Questa® ADMS™ and realize its full impact on your analog/mixed signal designs. You will study design flows and representations, in particular top-down design and bottom-up verification and how Questa ADMS may be used to bring a design to completion.

More upcoming dates (1 total)

6/24/13

Online

This course teaches you how to insert full scan in a design using the DFTAdvisor™ tool flow, and shows you how to create high quality test patterns using the ATPG tool flow. This course also teaches you ATPG compression techniques along with industry-standard Tessent TestKompress compression techniques.

More upcoming dates (7 total)

6/25/13	Fremont, CA
7/16/13	Austin, TX
8/13/13	Tempe, AZ
9/10/13	Singapore, SG
9/24/13	Hsinchu City, TW
10/15/13	Austin, TX
11/18/13	Herzliya, IL

Using the DxDesigner tools suite, you will gain proficiency in project management with Dashboard, schematic capture with DxDesigner, part selection using DxDataBook™, and much more. You will also learn how to prepare your final schematic for interfacing with the Mentor Graphics® PADS® Layout tool.

More upcoming dates (6 total)

6/25/13	Longmont, CO
7/08/13	Online
7/29/13	Fremont, CA
10/01/13	Marlborough, MA
12/09/13	Longmont, CO
1/21/14	Fremont, CA

This course will help you understand many of the advanced layout options available for Expedition PCB, including many of the purchasable utilities.

More upcoming dates (10 total)

6/25/13	Fremont, CA
7/09/13	Munich, DE
7/15/13	Singapore, SG
7/29/13	Online
8/05/13	Longmont, CO
9/04/13	Seoul, KR
10/14/13	Munich, DE
10/14/13	Herzliya, IL
10/15/13	Marlborough, MA
1/14/14	Fremont, CA

This course teaches you how to manage the data and monitor the changes between the two design flows while maintaining consistency.

More upcoming dates (4 total)

6/25/13	El Segundo, CA
7/10/13	Online
11/12/13	Online
12/04/13	Munich, DE

This course will equip you with a good understanding of the complete Capital Integrator functionalities.

More upcoming dates (2 total)

6/26/13	Munich, DE
10/16/13	Munich, DE

The PADS Router course teaches you the workflow of completing designs using the latest version of Mentor Graphics PADS Router.

More upcoming dates (4 total)

6/27/13	Marlborough, MA
9/26/13	Longmont, CO
12/19/13	Marlborough, MA
1/30/14	Fremont, CA

This course is designed to cover all the necessary skills required to use CES efficiently and effectively in Board Station XE design flow.

More upcoming dates (1 total)

6/27/13

Meudon, FR

This course will help you understand how you can customize the PCB flow tools, DxDesigner® and Expedition, to both integrate the tools into your process flows as well as enhance their capabilities.

More upcoming dates (9 total)

7/01/13	Singapore, SG
7/02/13	Munich, DE
7/09/13	Fremont, CA
9/10/13	Longmont, CO
9/17/13	Munich, DE
10/02/13	Meudon, FR
12/04/13	Marlborough, MA
12/17/13	Munich, DE
1/20/14	Munich, DE

The PADS Logic and Layout on-demand course teaches you the workflow of designing a printed circuit board using Mentor Graphics PADS Logic and PADS Layout. Course content and labs are available for 30 days from first login.

More upcoming dates (1 total)

7/01/13

Online