Expedition

This course will help you understand basic signal integrity, crosstalk, EMI concepts and pre-and post layout stages of the design process.

More upcoming dates (10 total)

6/19/13	Munich, DE
7/15/13	Marlborough, MA
7/24/13	Hsinchu City, TW
8/20/13	Online
9/04/13	Munich, DE
9/24/13	Marlborough, MA
9/30/13	Singapore, SG
10/14/13	Longmont, CO
10/24/13	Hsinchu City, TW
11/05/13	Fremont, CA

This course will help you understand the basic concepts of power distribution and delivery on a PCB, power integrity simulation, identification of power distribution problems on your PCB, and fixing these problems early in the design cycle.

More upcoming dates (9 total)

6/24/13	Herzliya, IL
7/17/13	Marlborough, MA
8/27/13	Munich, DE
9/17/13	Online
9/26/13	Marlborough, MA
11/07/13	Fremont, CA
11/12/13	Munich, DE
1/15/14	Longmont, CO
3/10/14	Marlborough, MA

This course will help you understand many of the advanced layout options available for Expedition PCB, including many of the purchasable utilities.

More upcoming dates (10 total)

6/25/13	Fremont, CA
7/09/13	Munich, DE
7/15/13	Singapore, SG
7/29/13	Online
8/05/13	Longmont, CO
9/04/13	Seoul, KR
10/14/13	Munich, DE
10/14/13	Herzliya, IL
10/15/13	Marlborough, MA
1/14/14	Fremont, CA

This course teaches you how to manage the data and monitor the changes between the two design flows while maintaining consistency.

More upcoming dates (4 total)

6/25/13	El Segundo, CA
7/10/13	Online
11/12/13	Online
12/04/13	Munich, DE

This course will help you understand how you can customize the PCB flow tools, DxDesigner® and Expedition, to both integrate the tools into your process flows as well as enhance their capabilities.

More upcoming dates (9 total)

7/01/13	Singapore, SG
7/02/13	Munich, DE
7/09/13	Fremont, CA
9/10/13	Longmont, CO
9/17/13	Munich, DE
10/02/13	Meudon, FR
12/04/13	Marlborough, MA
12/17/13	Munich, DE
1/20/14	Munich, DE

This Course covers all the necessary skills required to use CES efficiently and effectively in DxDesigner-Expedition flow.

More upcoming dates (10 total)

7/02/13	Meudon, FR
7/11/13	Marlborough, MA
7/15/13	Herzliya, IL
7/18/13	Munich, DE
7/18/13	Longmont, CO
7/30/13	Online
8/15/13	Fremont, CA
9/12/13	Munich, DE
10/01/13	Online
10/10/13	Marlborough, MA

HyperLynx 3D Analysis course will help you gain the ability to accurately model and simulate discontinuities such as vias in PCBs in HyperLynx 3D EM environment.

More upcoming dates (1 total)

7/04/13

Singapore, SG

This course will help you understand the application of HyperLynx SI to solve real world signal integrity problems. It covers two design areas in both pre- and post-layout: source-synchronous design analysis and SERDES design analysis

More upcoming dates (7 total)

7/09/13	Munich, DE
7/29/13	Herzliya, IL
8/26/13	Marlborough, MA
10/02/13	Singapore, SG
10/16/13	Longmont, CO
10/22/13	Munich, DE
12/18/13	Marlborough, MA

This course will help you to improve your knowledge and skills with Design Definition solutions.

More upcoming dates (10 total)

7/15/13	Munich, DE
7/15/13	Longmont, CO
7/22/13	El Segundo, CA
7/29/13	Online
8/06/13	Newbury, GB
8/06/13	Utrecht, NL
8/06/13	Seoul, KR
8/12/13	Fremont, CA
8/14/13	Singapore, SG
9/09/13	Munich, DE

This course covers the Valor NPI operations for incorporating Design for Manufacturing (DFM) analysis into your PCB design process. At the conclusion of this course the attendee will understand the navigation of the Valor NPI system, general tool usage, and analysis review. Focus will be placed on a “Best Practices” process flow that will guide the user through the stages of ODB++ export and EDA input, through analysis and resolution, and finishing with output and reporting.

More upcoming dates (4 total)

7/16/13	Marlborough, MA
9/10/13	Fremont, CA
10/22/13	Longmont, CO
11/20/13	Marlborough, MA

This course will give you the skills necessary to create, protect, add to and change the different data types in your Central Library. The lecture modules discuss the Central Library philosophy as well as how to use the Library Manager tools and how to best interface library objects into your design process.

More upcoming dates (7 total)

7/16/13	Online
8/12/13	Fremont, CA
9/09/13	Marlborough, MA
10/08/13	Munich, DE
11/04/13	Longmont, CO
11/26/13	Online
1/20/14	Fremont, CA

Expedition® PCB Introduction presents the workflow and methods of laying out a printed circuit board using the latest version of Mentor Graphics Expedition PCB. From fundamental library concepts, to the PCB editor environment and the PCB layout process, you will gain hands-on experience in integrating a source schematic, placing and routing the board, and outputting the fabrication data.

More upcoming dates (10 total)

7/22/13	Munich, DE
8/19/13	Fremont, CA
9/03/13	Newbury, GB
9/03/13	Utrecht, NL
9/16/13	Longmont, CO
9/16/13	Munich, DE
9/23/13	Marlborough, MA
9/24/13	Online
9/30/13	Meudon, FR
10/28/13	Marlborough, MA

The Expedition Advanced Packaging Bndl enables 3D Advanced packaging design in Expedition. This includes IC packaging, MCM/Hybrid Design and Mixed signal SiP design. 3D Wire bonding, Chip Stacking, substrate cavities as well as integral embedded passives are supported in this flow and are covered in this class.

More upcoming dates (1 total)

8/05/13

Singapore, SG

Learn the methodology, techniques and processes that have enabled the world's foremost electronic design companies to pioneer leading edge designs. Signal integrity and high-speed methodology will teach you to make quality digital designs and printed circuit boards through knowledge of signal integrity.

More upcoming dates (5 total)

8/20/13	Fremont, CA
9/02/13	Munich, DE
10/07/13	Singapore, SG
11/18/13	Munich, DE
11/19/13	Marlborough, MA

The Expedition® PCB for Design Review course will help design engineers learn a few basic features of Expedition PCB so they can conduct a successful design review.

More upcoming dates (2 total)

8/26/13	Longmont, CO
8/27/13	Online

Well-maintained and consistent libraries are the keys to efficient design work in Expedition PCB. The "Library Manager for Expedition PCB" course will give you the skills necessary to create, protect, add to and change the different data types in your Central Library. The lecture modules discuss the Central Library philosophy as well as how to use the Library manager tools and how to best interface library objects into your design process.

More upcoming dates (1 total)

8/26/13

Singapore, SG

This course will help you efficiently implement RF and mixed technology RF designs on an Expedition PCB. In addition, it will teach the process of moving the data back and forth between a DXD/Expedition environment and Microwave office and Agilent ADS tools.

More upcoming dates (4 total)

8/27/13	Longmont, CO
8/28/13	Online
2/03/14	Longmont, CO
2/04/14	Online

This course covers the most important aspects of setting up the Analog Designer tool. It covers setting pointers to models libraries as well as how to develop new libraries and manipulate models. The functionality of the Analog Waveform Displayer (AWD) is described in detail, as well as the Waveform Calculator. All the domain analysis functionality is thoroughly explored, as well as statistical analysis.

More upcoming dates (1 total)

10/08/13

Hsinchu City, TW