Sign In
Forgot Password?
Sign In | | Create Account

Signal Integrity & EMC Pro Tune-Up

Categories: Expedition/Xpedition, HyperLynx

This course is for engineers and layout designers building High Speed Digital Systems. The core concept is a proven process which results in solid reliable designs that are also quiet enough to pass FCC & CISPR radiated emissions tests on the first try. Signal Integrity & EMC Pro Tune-up Training is about how to move from a trial and error process to a proven "right the first time" methodology. View course details ↓

There are no classes for this course that are open for registration. Request a class

Course Highlights

You will learn how to

  • Understand the basics of a solid high speed system design process, which will:
    • Produce a solid, reliable, quiet system on the first board implementation
    • Save an average of 2 board spins per design
    • Give the software developers a reliable test bed that works at full speed
    • Allow engineers, layout designers, and managers to operate more efficiently

Key topics

  • The Holistic Nature of Signal Integrity, Radiated Emissions, and Susceptibility
  • Board Stack-up... What is a good or bad stack-up and why?
  • Power Integrity... In adequate capacitance > ground bounce > SI errors & Radiated Emissions
  • High Speed Routing Rules, Via Placement, and Return Current Control
  • Termination Schemes and their Ramifications
  • Cross Talk ... how to predict it and how to control it
  • LVDS and SERDES ... how these pseudo-differential signals really work
  • Radiated Emissions... What causes FCC & CISPR radiated emission failure?
  • Analogue / Digital interface - isolation
  • Signal Triage, Noise Budgeting and Planning for Success
  • The Jump Start Process... putting the pieces together for a "right the first time" design
  • Pre-layout Design Review
  • Post Layout Design Review
  • Going off board...connectors, back planes, cables, and how you can avoid really big problems
  • Susceptibility... How to "bullet proof" your design.

Course Information

Intended for

Engineers and layout designers who need to implement a high speed system design process in their organization, whether jump starting a new design or fixing previous designs.

Prerequisites None
Course Part Number
  • Classroom: 237766

Recently viewed courses

 
Online Chat