Munich, Germany Training Center

This course will give you the skills necessary to create, protect, add to and change the different data types in your Central Library. The lecture modules discuss the Central Library philosophy as well as how to use the Library Manager tools and how to best interface library objects into your design process.

More upcoming dates (2 total)

6/04/13	Munich, DE
10/08/13	Munich, DE

This course will help you acquire the skills needed to maximize your usage of Questa® ADMS™ and realize its full impact on your analog/mixed signal designs. You will study design flows and representations, in particular top-down design and bottom-up verification and how Questa ADMS may be used to bring a design to completion.

More upcoming dates (1 total)

6/05/13

Munich, DE

Expedition® PCB Introduction presents the workflow and methods of laying out a printed circuit board using the latest version of Mentor Graphics Expedition PCB. From fundamental library concepts, to the PCB editor environment and the PCB layout process, you will gain hands-on experience in integrating a source schematic, placing and routing the board, and outputting the fabrication data.

More upcoming dates (5 total)

6/10/13	Munich, DE
7/22/13	Munich, DE
9/16/13	Munich, DE
11/04/13	Munich, DE
12/09/13	Munich, DE

This course will help you understand the basic concepts of power distribution and delivery on a PCB, power integrity simulation, identification of power distribution problems on your PCB, and fixing these problems early in the design cycle.

More upcoming dates (3 total)

6/11/13	Munich, DE
8/27/13	Munich, DE
11/12/13	Munich, DE

Learn the methodology, techniques and processes that have enabled the world's foremost electronic design companies to pioneer leading edge designs. Signal integrity and high-speed methodology will teach you to make quality digital designs and printed circuit boards through knowledge of signal integrity.

More upcoming dates (3 total)

6/17/13	Munich, DE
9/02/13	Munich, DE
11/18/13	Munich, DE

This course will help you understand basic signal integrity, crosstalk, EMI concepts and pre-and post layout stages of the design process.

More upcoming dates (3 total)

6/19/13	Munich, DE
9/04/13	Munich, DE
11/20/13	Munich, DE

This course was developed to provide a detailed look at the Capital Logic toolset, taking the participant from the basic concepts through the more complex functional designs.

More upcoming dates (2 total)

6/24/13	Munich, DE
10/14/13	Munich, DE

This course teaches you how to manage the data and monitor the changes between the two design flows while maintaining consistency.

More upcoming dates (2 total)

6/25/13	Munich, DE
12/04/13	Munich, DE

This course will equip you with a good understanding of the complete Capital Integrator functionalities.

More upcoming dates (2 total)

6/26/13	Munich, DE
10/16/13	Munich, DE

This course will help you understand how you can customize the PCB flow tools, DxDesigner® and Expedition, to both integrate the tools into your process flows as well as enhance their capabilities.

More upcoming dates (4 total)

7/02/13	Munich, DE
9/17/13	Munich, DE
12/17/13	Munich, DE
1/20/14	Munich, DE

This course will help you understand the application of HyperLynx SI to solve real world signal integrity problems. It covers two design areas in both pre- and post-layout: source-synchronous design analysis and SERDES design analysis

More upcoming dates (2 total)

7/09/13	Munich, DE
10/22/13	Munich, DE

This course will help you understand many of the advanced layout options available for Expedition PCB, including many of the purchasable utilities.

More upcoming dates (3 total)

7/09/13	Munich, DE
10/14/13	Munich, DE
1/27/14	Munich, DE

This course will help you to improve your knowledge and skills with Design Definition solutions.

More upcoming dates (5 total)

7/15/13	Munich, DE
9/09/13	Munich, DE
10/21/13	Munich, DE
12/02/13	Munich, DE
1/13/14	Munich, DE

This course will help you to improve your knowledge and skills with Design Definition solutions.

More upcoming dates (2 total)

7/16/13	Munich, DE
9/11/13	Munich, DE

This Course covers all the necessary skills required to use CES efficiently and effectively in DxDesigner-Expedition flow.

More upcoming dates (5 total)

7/18/13	Munich, DE
9/12/13	Munich, DE
10/24/13	Munich, DE
12/05/13	Munich, DE
1/16/14	Munich, DE

Learn how to leverage the full power of Calibre nmDRC and Calibre nmLVS by attending the ‘Calibre Fundamentals: Performing DRC/LVS’ course. This course will teach you to effectively use Mentor Graphics Calibre nmDRDC and Calibre LVS software in your layout verification flow and will empower you to analyze DRC and LVS results successfully in coordination with a layout editor. The lecture modules will guide you through the various concepts underlying state-of-the-art layout verification techniques and specific aspects of the Calibre nmDRC and Calibre nmLVS toolset.

More upcoming dates (1 total)

10/08/13

Munich, DE

Calibre® eqDRC represents an important breakthrough in physical verification, making it possible for anyone performing design rule and LVS checks to truly do more with less.

More upcoming dates (1 total)

10/14/13

Munich, DE

Layout Versus Schematic (LVS) verification has always played a critical role in the IC design process. Calibre nmLVS continues to be the pre-eminent tool for this task. Recent Calibre enhancements have significantly extended the tool’s capabilities and have helped to streamline the LVS debugging task. This course will introduce you to all of these new features through a series of LVS case studies.

More upcoming dates (1 total)

10/17/13

Munich, DE

This course introduces you to the basic and more complex functionality within the Capital Harness XC product. This tool provides a seamless transition of data from Capital Logic or Integrator into Capital Harness XC.

More upcoming dates (1 total)

11/04/13

Munich, DE

This course was developed to provide users with a comprehensive understanding of modular functionality within the Capital toolset. Hands-on lab exercises will reinforce lecture and discussion topics under the guidance of our industry expert instructors

More upcoming dates (1 total)

11/06/13

Munich, DE